021506.3MXEP

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series 215 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification Features Agency File Number PS E Cartridge: NBK080205-E10480A NBK250702-E10480E NBK100408-JP1021A Leaded: NBK080205-E10480B NBK250702-E10480F NBK100408-JP1021B . Ampere Range 1A – 5A 6.3A – 15A 16A – 20A 1A – 6.3A CQC07012021808 8A – 10A SU05001-2011B SU05001-10001 SU05001-10002 SU05001-2012B 1A – 2.5A 3.15A – 6.3A 8A 4A - 10A E10480 0.125A - 20A 1517218 40013521 40016610 KM41462 J50258578 N/A • High breaking capacity • RoHS compliant and lead-free Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Additional Information 1A – 5A 6.3A – 15A 16A – 20A 2005010207145714 29862 • Meets the IEC 60127-2, Sheet 5 specification for Time-Lag fuses Applications Agency Approvals Agency • Designed to International (IEC ) Standards for use globally 0.5A – 12A 0.125A-12A 15A*, 16A*, 20A* 0.2A – 8A *10A Datasheet Electrical Characteristics for Series % of Ampere Rating 150% 210% *12A 0.200A – 10A 275% 16A/20A 0.125A – 20A Samples Resources 400% * Approved for cartridge versions only 1000% Ampere Rating Opening Time 0.125A – 0.800A 60 minutes, Minimum 1A – 3.15A 60 minutes, Minimum 4A – 6.3A 60 minutes, Minimum 8A – 20A 30 minutes, Minimum 0.125A – 0.800A 30 minutes, Maximum 1A – 3.15A 30 minutes, Maximum 4A – 6.3A 30 minutes, Maximum 8A – 20A 30 minutes, Maximum 0.125A – 0.800A .25 sec. Min.; 80 secs. Max. 1A – 3.15A .75 sec. Min.; 80 secs. Max. 4A – 6.3A .75 sec. Min.; 80 secs. Max. 8A – 20A .75 sec. Min.; 80 secs. Max. 0.125A – 0.800A .05 sec., Min.; 5 secs. Max. 1A – 3.15A .095 sec., Min.; 5 secs. Max. 4A – 6.3A .150 sec., Min.; 5 secs. Max. 8A – 20A .150 sec., Min.; 5 secs. Max. 0.125A – 0.800A .005 sec., Min.; .150 sec. Max. 1A – 3.15A .010 sec., Min.; .150 sec. Max. 4A – 6.3A .010 sec., Min.; .150 sec. Max. 8A – 20A .010 sec., Min.; .150 sec. Max. © 2017 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Electrical Characteristic Specifications by Item Nominal Nominal Voltage Interrupting Amp Amp Cold Melting Rating Rating Code Rating Resistance I2t (V) (A2 sec) (Ohms) .125 0.125 250 .160 0.16 .200 0.2 Maximum Maximum Voltage Power Drop at Dissipation Rated at 1.5ln Current (W) (mV) Agency Approvals PS E 11.4455 0.0330 2600 1.6 x x x 250 7.1000 0.0465 2400 1.6 x x 250 1.8400 0.340 2100 1.6 x x x x x x .250 0.25 250 1.2400 0.545 1500 1.6 x x x x x .315 0.315 250 0.8800 0.975 1100 1.6 x x x x x .400 0.4 250 0.5825 1.325 1000 1.6 x x x x x .500 0.5 250 1.1675 0.420 850 1.6 x x x x x x .630 0.63 250 0.7200 0.635 650 1.6 x x x x x x .800 0.8 250 0.4675 0.975 500 1.6 x x x x x x 001. 1 250 1.25 1.25 250 0.1515 1.520 350 2.5 x x x x x x x x x 0.1074 3.200 300 2.5 x x x x x x x x 01.6 1.6 x 250 0.0707 6.830 200 2.5 x x x x x x x x x 002. 02.5 2 250 0.0566 11.680 190 2.5 x x x x x x x x x 2.5 250 0.0386 22.290 180 2.5 x x x x x x x x 3.15 x 3.15 250 0.0283 43.255 140 4 x x x x x x x x 004. x 4 250 0.0185 46.960 100 4 x x x x x x x x x 005. 5 250 0.0153 66.095 100 4 x x x x x x x x x 06.3 6.3 250 0.0108 128.750 100 4 x x x x x x x x 008. 8 250 0.0092 209.880 100 4 x x x x x x x x x 010. 10 250 0.0066 333.565 100 4 x x x x x x x* x x 012. 12 250 0.0061 515.500 100 4 x x x 015. 15 250 0.0033 1237.0 N/A** N/A** x x x* 016. 16 250 0.0031 1408.0 N/A** N/A** x x x* x x 020. 20 250 0.0023 2600.0 N/A** N/A** x x x* x x 1500 A @ 250 VAC 500 A @ 250Vac 400 A @ 250Vac x x x* x x X* Approval for cartridge versions only N/A** - Please contact Littelfuse for details on these parameters 1A to 2A have an IR : 100A@500VAC, 4A to 6-3A have the IR : 100A@305 VAC and 1000A@72VDC Product Characteristics I2t test at 10x rated current. Temperature Re-rating Curve © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/12/17 Materials Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2: Agency approval markings Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B (5 cycles, –65ºC to +125ºC) Vibration MIL-STD-202, Method 201 Humidity MIL-STD-202, Method 103, Test Condition A (High RH (95%) and elevated temp (40ºC) for 240 hours) Salt Spray MIL-STD-202, Method 101, Test Condition B Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Average Time Current Curves T-C Curves for 1A to 20A only .125 A .160 A .200 A .250 A A .125 .315 A A .160 .400 A A .200 .500 A .250 .630 A .315 .800 A .400 .500 A .630 A .800 A 1.00 A 1.25 A 1.60 A 2.00 A A 1.00 2.50 A A 1.25 3.15 A A 1.60 4.00 A A 2.00 5.00 A A 2.50 6.30 A A 3.15 8.00 A A 4.00 10.0 A 5.00 A 12.0 A A 6.30 15.0 A 8.00 A 16.0 A A 10.0 20.0 A 12.0 A 15.0 A 16.0 A 20.0 A T-C Curves for 125mA to 800mA only 10000 10000 10000 10000 1000 1000 1000 1000 10 1 10 100 TIME IN SECONDS 1 TIME IN SECONDS 10 100 100 TIME IN SECONDS TIME IN SECONDS 100 10 0.1 0.1 0.1 0.1 0.01 0.01 0.01 0.01 0.001 0.001 0.001 0.001 0.1 1 0.1 10 1 100 10 0.1 1000 1000 100 0.1 1 1 10 10 100 100 1000 1000 CURRENT IN AMPERES CURRENT IN AMPERES CURRENT IN AMPERES CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Lead-Free Recommendation Preheat: 240 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: Preheat Time: 150° C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds 40 Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. A Different values of A and B available, please contact the Littelfuse sales representative in your region: B A For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB: C Lead forming: The distance C between cap flat surface and axial lead shall be greater than 1.0 mm. C PCB mounting: The distance between PCB and fuse cap is recommended to B be a minimum of 1.5 mm. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Dimensions Part Numbering System 0215 xxxx M X E/G P All dimensions in mm 20±0.5 0215.125P to 0215020P +0.1 5.2 −0.2 5.1±0.6 0215.125XEP to 0215.800XEP 40±1.0 0215001.XEP to 0215020.XEP 40±1.0 Series Amp Code 5.1±0.6 21.5±1.0 Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 Quantity Code M = 1000 H = 100 0.65±0.05 Packaging Code 21.5±1.0 5.5±0.3 X = Filler Option Codes Blank : Cartidge Type Fuse E : Axial Lead Fuse G : Color Coding 0.65±0.05* Notes: * Ratings above 6.3 A have 0.8 ± 0.05 diameter lead; * Ratings above 12 A have 1.2 ± 0.05 diameter lead. Lead-free Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A N/A N/A N/A N/A 1000 1000 1000 1000 1000 100 MX MXE MRET1 MXG MXB HX N/A N/A T1=53mm (2.087”) N/A N/A N/A 215 Series Bulk Bulk Reel and Tape Bulk and Color Coding Bulk Bulk © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/12/17