061706.3MXEP

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 617 Series 617 Series, 5 × 20 mm, Fast-acting Fuse RoHS Pb Description 5×20mm fast-acting glass body cartridge fuse designed to IEC specification. Features • Designed to International (IEC ) Standards for use globally • Meets the IEC 60127-2, Sheet 2 specification for fast-acting fuses Agency Approvals Agency Agency File Number • Available in cartridge and axial lead form • RoHS compliant and lead-free Applications Ampere Range 2002010207024438 0.4A-6.3A E10480 0.4A-10A 29862 0.4A-6.3A 40014952 0.4A-6.3A 8A*, 10A* N/A 0.4A-10A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating 150% 210% *Approval for cartridge versions only 275% 400% 1000% Ampere Rating Opening Time 0.4A-6.3A 60 minutes, Minimum 8A-10A 30 minutes, Minimum 0.4A-6.3A 30 minutes, Maximum 8A-10A 30 minutes, Maximum 0.4A-6.3A 0.05 sec., Min.; 2 sec. Max. 8A-10A 0.05 sec., Min.; 2 sec. Max. 0.4A-6.3A .01 sec., Min.; 0.3 sec. Max. 8A-10A .01 sec., Min.; 0.4 sec. Max. 0.4A-6.3A .02 second, Maximum 8A-10A .04 second, Maximum Additional Information Datasheet Resources Samples © 2015 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 06/18/15 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 617 Series Electrical Characteristic Specifications by Item Amp Code Amp Rating (A) Voltage Rating (V) .400 0.4 .500 0.5 .630 Agency Approvals Maximum Maximum Voltage Drop at Power Rated Current Dissipation At (mV) 1.5ln(W) Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) 250 0.2770 0.12500 1200 1.6 x x x x x 250 0.2065 0.21500 1000 1.6 x x x x x 0.63 250 0.1900 0.41000 650 1.6 x x x x x .800 0.8 250 0.1203 0.85000 240 1.6 x x x x x 001. 1 250 0.0964 1.04500 200 1.6 x x x x x 1.25 1.25 250 0.0701 2.23000 200 1.6 x x x x x 01.6 1.6 250 0.0528 4.61500 190 1.6 x x x x x 002. 2 250 0.0416 5.73000 170 1.6 x x x x x 02.5 2.5 250 0.0334 9.46000 170 1.6 x x x x x 3.15 3.15 250 0.0224 17.72000 150 2.5 x x x x x 004. 4 250 40A@250Vac 0.0165 29.16500 130 2.5 x x x x x 005. 5 250 50A@250Vac 0.0137 42.79500 130 2.5 x x x x x 06.3 6.3 250 63A@250Vac 0.0095 62.46500 130 2.5 x x x x x 008. 8 250 80A@250Vac 0.0068 198.16000 130 4 x x x* 010. 10 250 100A@250Vac 0.0063 217.63500 130 4 x x x* Interrupting Rating 35A@250Vac * Approval for cartidge versions only. Average Time Current Curves 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/18/15 0.001 0.01 0.1 1 10 CURRENT IN AMPERES 100 1000 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 617 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C 60-180 seconds Preheat Time: 120 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Material Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Agency approval marks Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel) Operating Temperature –55OC to +125OC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL-STD-202, Method 201 Humidity Salt Spray MIL-STD-202, Method 103, Test Condition A. high RH (95%) and elevated temperature (40°C) for 240 hours. MIL-STD-202, Method 101, Test Condition B © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/18/15 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 617 Series Dimensions Part Numbering System 0617 xxxx M X E P 20+0.5 0617 000P Series 5.2+0.1 -0.2 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.1+0.6 Quantity Code M = 1000 0617.400 XEP to 0617010 XEP 21.5±1.0 40±1.0 5.5±0.3 Packaging Code X = Filler Option Codes Blank = Cartridge Type Fuse E = Axial Leaded Fuse 0.65±0.05* All dimensions in mm Lead-free Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E N/A N/A N/A 1000 1000 1000 1000 1000 100 MX MXE MRET1 MXG MXB HX N/A N/A T1=53mm (2.087”) N/A N/A N/A 617 Series Bulk Bulk Reel and Tape Bulk Bulk Bulk © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/18/15