MS151J-HRMJ

Interface RF Connector with Switch MS-151 Series sOverview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight and high reliability makes it ideal for use in 2.4 GHz band wireless LAN applications. Plug can be rotated after full insertion. sFeatures 1. Confirmation of complete connection Built-in interlock feature confirms fully mated condition with a "click" sensation. 2. Non-directional connection The connector can be mated in any position on a 360° axis and can rotate within the same when in use, allowing routing of the connected cable in any direction. qReceptacle 3. High durability Guaranteed 5000 insertion/removal cycles. 4. Space-saving T he external dimensions of the board-mounted receptacle (5.0 mm high, 6.5 mm wide, 7.0 mm deep) makes it ideal for use in small devices. 5. Ease of connection and handling Over-molded plug, with convenient grip and built-in cable strain relief assures reliable mating/un-mating by end user. 6. Designed for board placement with automatic equipment Top surface of receptacle assembly is flat, allowing reliable hold for vacuum nozzles of automatic placement equipment. qPlug MS-151 sApplications GPS terminals, wireless LAN modules, notebook computers, PDA, and other high frequency equipment. (Page 7 lists applications and antenna circuit switching examples.) MS-151-C(LP) qSMA Conversion Adapter For Receptacle: MS-151 qSMA Conversion Adapter For Plug: MS-151-C(LP) MS151P-HRMJ MS151J-HRMJ 124 sProduct Specifications Frequency range Operating temperature range Power rating 1 DC to 1 GHz DC to 3GHz -40ç to +85ç 4W Not mated with the plug 1.2dBmax. 1.4dBmax. 1.7dBmax. 0.2dB 0.4dB 0.6dB max. max. max. 0.3dB 0.5dB 1.0dB 20dB 18dB 12dB max. max. max. min. min. min. Mated(MS-151-C-(LP)) V.S.W.R. 1 GHz to 2 GHz 2 GHz to 3 GHz 1 DC to 1 GHz Insertion loss 1 GHz to 2 GHz 2 GHz to 3 GHz 1 DC to 1 GHz ------------------------------------------ Isolation loss 1 GHz to 2 GHz 2 GHz to 3 GHz Item Specification Conditions 100 mA 100 V DC 100 V AC / 1 minute Frequency: 10 to 500 Hz, single amplitude of 0.75 mm, acceleration of 98 m/s2 for 2 hours in each of the 3 directions Acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55ç / +5ç to +35ç / +85ç / +5ç to +35ç Time: 30 / 5 max. / 30 / 5 max.(Minutes) 100 cycles 96 hours at temperature of 40ç and humidity of 90% 5% salt water solution, 48 hours (at 35ç) With corresponding connector 5000 cycles 1. Contact resistance 50 m ohms max. 2. Insulation resistance 1000 M ohms min. 3. Withstanding voltage No flashover or insulation breakdown 4. Vibration No electrical discontinuity of 10 µ s or more 5. Shock 6. Temperature cycle 7. Humidity 7. (Steady state) 8. Salt spray Contact resistance: 100 m ohms max. Insulation resistance: 10 M ohms min. Contact resistance: 100 m ohms max. No corrosions Insertion force: 1~10N 9. Insertion/Withdrawal forces Withdrawal force: 3~15N 10. Durability Contact resistance: 100 m ohms max. 10. (insertion/ withdrawal) sMaterials Receptacle MS-151 Part Insulator Lock mating section Outer conductor shell Contact A Contact C Material Polyamide (UL 94V-0) Stainless steel Phosphor bronze Phosphor bronze Beryllium copper Finish --------------Nickel plating (Termination area: tin-lead plated) Nickel plating (Termination area: tin-lead plated) Gold plating Gold plating Plug MS-151-C(LP) Part Cover A Cover B Ring Outer conductor shell Inner contact Insulator Ferrule Crimp metal fitting Bushing Material PC PC Stainless steel Phosphor bronze Phosphor bronze Polyamide (UL 94-HB) Stainless steel Brass Polyester Finish ----------------------------- Nickel plating Nickel plating Gold plating ----------------------------- Nickel plating --------------- 125 BTypical data qNORMALLY CLOSED(N.O) ~ (Not mated with the plug) : V.S.W.R. SPEC : INSERTION LOSS SPEC : ISOLATION SPEC INSERTION LOSS [dB] 0 0.2 INSERTION LOSS 0.4 0.6 0.8 1.0 V.S.W.R. 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 DC 1.0 2.0 3.0 [GHz] qOPEN(N.O) ~ (Mated with the plug) INSERTION LOSS [dB] 0 0.2 0.4 0.6 0.8 1.0 0 INSERTION LOSS 1.7 1.6 1.5 1.4 1.3 V.S.W.R. 1.2 1.1 ISOLATION 1.0 ISOLATION [dB] 10 20 30 40 DC 1.0 2.0 3.0 [GHz] 126 V.S.W.R. V.S.W.R. sReceptacle G A C ＭＳ−１ １ ５ B G 6.5 7 1.2 5 2-0.65 （2.5） 2-1 2-0.3 2-φ0.9 2 2-0.8 2-0.25 2-0.3 1.8 3.6 5.2 0.5 3-□0.5 3 2.5 Part Number MS-151 MS-151(01) CL No. 358-0158-7-01 358-0158-7-01 Packaging 1,000 pieces per reel 100 pieces BCircuit diagram Not mated with the plug(N.C) Mated with the plug(N.O) G B G G A C G G B G G A C G BPCB mounting pattern 2-Ø 1.2 2.5 (Th rou gh 3 ole ) 1.35 2 1.65 2.3 0.6 Connector front edge 7.1 4.9 1.8 1.1 2-0.55 3.2 4.3 2-0.6 2-Ø1 0.2 1.3 No conductive traces 3.6 5.2 2 2-Ø (La nd) 127 BPackaging Specifications 12 Embossed tape reel packaging (1,000 pieces/reel) 1.75 4 2 Ø1 .5 Ø1 3 Unreeling direction 16.4 7.5 Ø2 16 1 MS-151 MS-151 Unreeling direction Ø380 Ø80 22.4 max. BRecommended Temperature Profile Maximum temperature Temperature (ç) 235 200 160 150 40sec. min. 100 50sec. max. 10sec. max. Peak temperature duration Peak temperature 200ç min. 150ç to 160ç : 240ç : 10 sec. Max. : 220ç to 235ç : 50 sec. Max. : 40 sec. Min. 50 0 7 Time (sec.) 128 sPlug (24.1) * Dedicated termination tools required. * Can be supplied terminated with cable. (12.5) (5.5) (8) (Ø4.15) Part Number MS-151-C(LP) CL No. 358-0160-9 Packaging 1 Applicable cable 1.5DS-QEHV(TA) or UL1.5DL1.5DS-QEHV(TA) Termination fixture: MS-151/CF-MD, MS-151/SO-MD, MS-151/BE-MP and MS-151/CK-MP Please contact your Hirose Electric representative for information. sSMA Conversion adaptors qFor Receptacle: MS-151 1/4-36UNS-2A 6.3 6 （6.29） 17.79 5.5 Part Number MS151P-HRMJ CL No. 355-0089-7 φ4.15 φ7.3 Packaging 1 qFor Plug: MS-151-C(LP) 1/4-36UNS-2A φ2.9 φ7.3 6.3 6 （6.29） 15.79 3.5 Part Number MS151J-HRMJ CL No. 355-0088-4 Packaging 1 129 sApplications qNotebook PC's, PDA's, GPS terminals, wireless communications equipments. GPS Note PC PDA BAntenna Circuit Re-directing Notebook PC with inner antenna for wireless LAN Outer antenna for wireless LAN Receptacle MS-151 Plug MS-151-C(LP) Re-direct from inner antenna to outer antenna G C A G G B G G C A G G B G Not mated with the plug (N.C) Mated with the plug (N.O) 130