PCN13-48S-2.54DS

Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side qStraight through hole type PCN10EA- * *P-2.54DSA Receptacle Side qStraight through hole PCN10EA-* *S-2.54DSA PCN10CA-* *S-2.54DSA PCN10EA-* *S-2.54DSA PCN10DA-* *S-2.54DSA PCN12EA-* *S-2.54DSA PCN12EA-* *S-2.54DSA PCN13EA-* *S-2.54DSA qWrapping type PCN10EA-* *S-2.54W* qStacking through hole type PCN10H* - * *P-2.54DSA qRight angle through hole type (mounted on the board edge) PCN10EA-* *P-2.54DS PCN12EA-* *P-2.54DS PCN12EA-* *P-2.54DS qRight angle through hole type (mounted on the board edge) PCN10BA-* *S-2.54DS qRight angle through hole type (mounted on the board) PCN10AE-* *P-2.54DS PCN10EA-* *P-2.54DS PCN12AE-* *P-2.54DS PCN12EA-* *P-2.54DS qRight angle through hole type (mounted on the board) PCN10AE-* *S-2.54DS PCN10CA-* *S-2.54DS PCN13EA-* *S-2.54DS qPress fit type qPress fit short pin type PCN11-* *S-2.54PFB-2 PCN11-* *P-2.54W* -2+PCN11-* *P-2.54H-2 qPress fit long pin type PCN11-* *S-2.54WB-2 qCable type PCN10-* *S-2.54C+PCN10-* * * *SC* PCN10-* *S-2.54R A27 BApplication Pattern sCircuit Protection Function Type q2-row type q3-row type ' : Mounting hole center C.L. :Center line 64 contacts : The sequential contacts are indicated at 22 points to contact No.1 to 4 and 26 to 32 in both rows a and b. 100 contacts : The sequential contact is indicated at 22 points to contact No.1 to 4 and 44 to 50 in both rows a and b. The sequential contacts are located at 22 points to a1 and a32. sStacking Connector ' : Mounting hole center C.L. :Center line *G : 35, 30, 25, 45, 40 A70 sCoaxial Connector and High Current Contact Composite Type Pin Header Side qRight angle through hole type (mounted on the board edge) PCN10F-* *P-2.54DS Receptacle Side qStraight through hole type PCN10FA-* *S-2.54DSA qWrapping type qRight angle through hole type (mounted on the board) PCN10FA-* *P-2.54DS PCN10FA-* *S-2.54W* qRight angle through hole type (mounted on the board edge) PCN10FB-* *S-2.54DS qRight angle through hole type (mounted on the board) PCN10FA-* *S-2.54DS qPress fit short pin type PCN11F-* *S-2.54PFB-2 qPress fit long pin type PCN11F-* *S-2.54WB-2 Circuit Protection Function Type Pin Header Side Receptacle Side qStraight through hole type PCN10MC*-* *S-2.54DSA qRight angle through hole type PCN10MC*-* *P-2.54DS qWrapping type PCN10MC*-* *S-2.54W* A28 PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,Wrapping Type) Double-sided two point Contact System PCN Series sFeatures 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard. Single-sided two point Contact System 2. Variation in number of contacts 10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and 144 contacts are available. 3. Two point contact construction PCN10 and 12 series are constructed with high reliable doublesided two point contacts. PCN13 series pursues after cost performance, and constructed with single sided two point contacts. 4. Broad applications DIN standard types of B, C, R, and Q are available. The flux tight product is available. The easy lock pin type to prefix the board is available. 5. Stacking height variation PCN10H series contains 25, 30, 35, 40 and 45mm stacking height. Stacking Connector 6. Circuit protection function available PCN10MC series utilizes a sequence structure for circuit protection function. 7. Cable connector ID connector for ribbon cable is available. The connector is prepared for crimping connection for AWC#26 to 30 cables. sApplication Control equipment, exchange, measuring instruments etc. A29 sProduct Specifications Rating Current rating: 2A Voltage rating: 300V AC Operating Temperature Range: -55 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Operating Humidity Range: 85% max Storage Humidity Range: 40 to 70% (Note 2) Item 1.Insulation Resistance 10 M ohms 6 Specification 100V DC Condition 1000V AC (insulation displacement, crimping type: 650V AC) /1 minute. 0.1A Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç : 30 minutes¡15 to 35ç: 5 minutes max.¡ 125ç : 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles 2.Withstanding Voltage No flashover or insulation breakdown. 3.Contact Resistance 4.Vibration 20m ohms max. No electrical discontinuity of 10µs or more 5.Humidity(Steady state) Insulation resistance : 106M ohms min. 6.Temperature Cycle No damage, cracks, or parts looseness. 500 cycles 7.Durability (Mating/un-mating) Contact resistance : 20m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. sMaterial Parts Insulator Contact Pin header Receptacle Material PBT Brass Copper alloy Finish Gray Contact area: Gold plated Remainer: Tin-lead plated Remarks UL94V-0 ----------------------------- sOrdering Information qPCN 10 Series PCN10 1 A – * P – 2.54 DS 2 3 4 5 6 3 Number of contacts: 2-row : 16, 20, 24, 32, 44, 50, 64, 90, 100 3-row : 48, 96, 144 4-row : 128 : P : Pin header : S : Receptacle : 2.54mm 1 2 Series Name Blank A B C: D: EA : H: HA : HB : HC : HD : MC : : PCN10 mold type (as listed below) } 4 Connector type Flux prevention type (DSA only) Rack installation type With Board prefixed lock pin Stacking height 35mm type Stacking height 30mm type Stacking height 25mm type Stacking height 45mm type Stacking height 40mm type Circuit Protection function type 5 Contact pitch 6 Contact type DS DSA WA WB R C : Right angle through hole type : Straight through hole type : Wrapping type (0.5tx0.7W) : Wrapping type (0.5tx0.5W) : Insulation displacement type : Crimping type * * A30 qPCN 12 Series (Plug) PCN12 1 q Series name w No symbol A A - * P - 2.54 DS 2 3 4 5 6 e Number of contacts : 2-row: 10, 16, 20, 24, 28, 32, 44, : PCN12 : DIN standard type C (96 Contacts) : Original type 50, 64, 90, 100 3-row: 96 P : Plug : 2.54mm : DS: Right angle through hole type t Contact pitch y Contact type E-EA : With board prefixed lock pin type r qPCN 12E-*S-2.54 DSA(Socket) PCN12 1 q Series name w No symbol E E - * S - 2.54 DSA 2 3 r 4 5 6 : PCN12 : Standard type S : Socket : 2.54mm : DSA: Straight through hole type t Contact pitch : With board prefixed lock pin type y Contact type 64, 90, 100 3-row: 96 e Number of contacts : 2-row: 10, 16, 20, 28, 32, 44, 50, qPCN 13E-*S-2.54 DSA (Socket) PCN13 1 q Series name : PCN13 w No symbol E E - * S - 2.54 DSA 2 3 r 4 5 6 S : Socket : 2.54mm : DS: Right angle through hole type : DSA: Straight through hole type : Standard type : With board prefixed easy pin type 64, 90, 100 3-row: 48, 96 t Contact pitch y Contact style e Number of contacts : 2-row: 10, 16, 20, 30, 32, 44, 50, *PCN13 series are only socket type. PCN10 and 12 series are mating connectors. A31 BDIN Connector Mating Condition DIN connectors of Hirose should be used under conditions as illustrated below. A32 BContact numbers According to the inter-combination with DIN standard type C (type B) and type R (type Q), the contact numbers and row numbers represent contact No. (No.1 to 32) and row No. (a, b, c). qDIN standard type C and type R represent the 3-row 96 contacts type, including 32 contacts in single-row. qDIN standard type B and type Q represent the 2-row 64 contacts type, including 32 contacts in single-row. 1 Receptacle straight type Type C (Type B) 2 Pin header right angle type Type C (Type B) 3 Pin header straight type Type R (Type Q) 4 Receptacle right angle type Type R (Type Q) Note: The DIN connector is basically standardized in combination with straight and right angle types. As shown above in illustrationss; The contact numbers is matched in combination with (1)-(2) and (3)-(4), while the contact numbers are inverted in combination with (1)-(2) and (3)-(4). A33 PCN13 Series sSocket: 2-row Straight Type Unit:mm PCN13-*S-2.54DSA Part Number PCN13-010S-2.54DSA PCN13-016S-2.54DSA PCN13-020S-2.54DSA PCN13-030S-2.54DSA PCN13-032S-2.54DSA PCN13-044S-2.54DSA PCN13-050S-2.54DSA PCN13-064S-2.54DSA PCN13-090S-2.54DSA PCN13-100S-2.54DSA CL No. 583-3000-5 583-3001-8 583-3002-0 583-3003-3 583-3004-6 583-3005-9 583-3006-1 583-3007-4 583-3008-7 583-3009-0 Number of Contacts 10 16 20 30 32 44 50 64 90 100 A 26.42 34.04 39.12 51.82 54.36 69.60 77.22 95.00 B 21.42 29.04 34.12 46.82 49.36 64.60 72.22 90.00 C 16.42 24.04 29.12 41.82 44.36 59.60 67.22 85.00 D 10.16 17.78 22.86 35.56 38.10 53.34 60.96 78.74 BPCB mounting pattern 128.02 123.02 118.02 111.76 140.72 135.72 130.72 124.46 sSocket: 2-row Right Angle Type PCN13-*S-2.54DS Unit:mm Part Number PCN13- 10S-2.54DS PCN13- 16S-2.54DS PCN13- 20S-2.54DS PCN13- 30S-2.54DS PCN13- 32S-2.54DS PCN13- 44S-2.54DS PCN13- 50S-2.54DS PCN13- 64S-2.54DS PCN13-100S-2.54DS CL No. 583-3030-6 583-3031-9 583-3032-1 583-3033-4 583-3034-7 583-3035-0 583-3036-2 583-3037-5 583-3039-0 Number of Contacts 10 16 20 30 32 44 50 64 100 A 30.40 38.02 43.10 55.80 58.34 73.58 81.20 98.98 B 16.42 24.04 29.12 41.82 44.36 59.60 67.22 85.00 C 10.16 17.78 22.86 35.56 38.10 53.34 60.96 78.74 D 25.4 33.02 38.10 50.8 53.34 68.58 76.2 93.98 BPCB mounting pattern 144.70 130.72 124.46 139.7 A62 sSocket: 3-row Straight Type PCN13-48S-2.54DSA 96S BPCB mounting pattern Unit:mm Part Number PCN13-48S-2.54DSA PCN13-96S-2.54DSA CL No. 583-3010-9 583-3011-1 Number of Contacts 48 96 A 54.36 95.00 B 50.00 90.00 C 44.36 85.00 D 38.10 78.74 sSocket: 3-row Right Angle Type PCN13-48S-2.54DS 96S BPCB mounting pattern Unit:mm Part Number PCN13-48S-2.54DS PCN13-96S-2.54DS CL No. 583-3040-0 583-3041-2 Number of Contacts 48 96 A 53.36 94.00 B 44.36 85.00 C 38.10 78.74 D 48.26 88.90 A63 BApplication Pattern qVertical Connection ' : Mounting hole center q2-row type C.L. :Center line A64 ' : Mounting hole center q3-row type C.L. :Center line 48 contacts: 19.09 48 contacts: 17.9 48 contacts: 19.09 A65 ' : Mounting hole center C.L. :Center line q3-row 144 Contact type q4-row type A66 48 contacts: 19.09 BApplication Pattern qHorizontal Connection ' : Mounting hole center q2-row type C.L. :Center line q4-row type A67 ' : Mounting hole center q3-row type C.L. :Center line A68 48 contacts: 19.09 BApplication Pattern qHorizontal Connection ' : Mounting hole center q2-row type C.L. :Center line q3-row type 48 contacts: 17.9 q4-row type 48 contacts: 17.9 A69