333E

HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Typical Applications The HMC333 / HMC333E is ideal for: • Wireless Local Loop Features Integrated LO Amplifier w/ Pdiss: < 25 mW Conversion Loss / Noise Figure: 8.5 dB Low LO Drive Level: 0 dBm Input IP3: +10 dBm Single Positive Supply: 3V to 5V 7 MIXERS - SMT Functional Diagram General Description The HMC333 & HMC333E are single balanced mixer ICs with integrated LO amplifiers. This converter IC can operate as an upconverter or downconverter between 3.0 GHz and 3.8 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 7 mA from a single positive +3V rail. The mixer has 8.5 dB of conversion loss, an input P1dB of 0 dBm and an input third order intercept point of +10 dBm at 3.5 GHz. Electrical Specifications, TA = +25° C Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) 1 dB Compression (Input) Supply Current (Idd) * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 10 5 10 3 -3 IF = 100 MHz LO = 0 dBm & Vdd = +3V Typ. 3.0 - 3.8 DC - 1.0 8.5 8.5 15 10 15 10 +1 7 11 11 Max. GHz GHz dB dB dB dB dB dBm dBm mA Units 7 - 204 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Conversion Gain vs. Temperature @ LO = 0 dBm 0 Isolation @ LO = 0 dBm 0 RF/IF LO/RF LO/IF CONVERSION GAIN (dB) -5 ISOLATION (dB) -5 7 MIXERS - SMT 7 - 205 -10 -10 -15 +25 C -40 C +85 C -15 -20 2.4 2.6 2.8 3 3.2 3.4 3.6 3.8 4 4.2 4.4 -20 2.4 2.6 2.8 3 3.2 3.4 3.6 3.8 4 4.2 4.4 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss @ LO = 0 dBm 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 RF LO CONVERSION GAIN (dB) -5 -6 dBm -4 dBm -2 dBm 0 dBm +2 dBm +4 dBm -10 -15 -20 2.4 -30 2.6 2.8 3 3.2 3.4 3.6 3.8 4 4.2 4.4 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. Vdd @ LO = 0 dBm 0 IF Bandwidth @ LO = 0 dBm 0 CONVERSION GAIN (dB) -5 RESPONSE (dB) -5 -10 -10 -15 +2.7V +3.0V +3.3V -15 CONVERSION GAIN RETURN LOSS -20 2.4 -20 2.6 2.8 3 3.2 3.4 3.6 3.8 4 4.2 4.4 0 0.2 0.4 0.6 0.8 1 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Input P1dB vs. Temperature @ LO = 0 dBm 10 8 Upconverter Performance Conversion Gain @ LO = 0 dBm 0 CONVERSION GAIN (dB) 6 -5 INPUT P1dB (dBm) 4 2 0 -2 -4 -6 -8 -20 3 3.2 3.4 3.6 3.8 4 FREQUENCY (GHz) -10 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 +25 C -40 C +85 C 7 MIXERS - SMT -10 -15 FREQUENCY (GHz) Input IP3 vs. LO Drive* 20 Input IP3 vs. Temperature @ LO = 0 dBm* 20 15 INPUT IP3 (dBm) INPUT IP3 (dBm) 15 10 10 5 -2 dBm 0 dBm +2 dBm 5 +25 C -40 C +85 C 0 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 FREQUENCY (GHz) 0 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 FREQUENCY (GHz) Input IP3 vs. Vdd @ LO = 0 dBm* 20 Input P1dB vs. Vdd @ LO = 0 dBm 10 8 6 15 INPUT P1dB (dBm) INPUT IP3 (dBm) 4 2 0 -2 -4 -6 -8 0 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 FREQUENCY (GHz) -10 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 +2.7V +3.0V +3.3V 10 5 +2.7V +3.0V +3.3V FREQUENCY (GHz) * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 7 - 206 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz MxN Spurious @ IF Port nLO mRF 0 1 2 3 4 0 xx 8 33 68 77 1 -9 0 49 56 80 2 -5 32 40 68 79 3 12 25 40 48 80 4 34 34 43 72 71 Harmonics of LO nLO Spur @ RF Port LO Freq. (GHz) 3 3.17 3.34 3.51 3.68 3.85 1 12 13 17 15 14 14 2 8 8 10 14 17 18 3 16 20 22 26 25 22 4 49 39 42 48 42 43 7 MIXERS - SMT 7 - 207 RF = 3.5 GHz @ -10 dBm LO = 3.4 GHz @ 0 dBm All values in dBc below IF power level. LO = 0 dBm All values in dBc below input LO level @ RF port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) LO Drive (Vdd = +3V) +13 dBm +13 dBm 5.5V 238 mW ±3 mA -65 to +150 °C -40 to +85 °C 7 MIXERS - SMT Vdd Continuous Pdiss (Ta = 85 °C) (derate 2.64 mW/°C above 85 °C) IF DC Current Storage Temperature Operating Temperature ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC333 HMC333E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H333 XXXX 333E XXXX [2] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 7 - 208 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1 Vdd Power supply for the LO Amplifier. Two external RF bypass capacitors (10 pF & 10,000 pF) and an external inductor (1.8 nH) are required. 7 MIXERS - SMT 7 - 209 2, 5 GND Ground: Pin must connect to RF ground. This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 3mA of current or die nonfunction and possible die failure will result. 3 IF 4 RF This pin is AC coupled and matched to 50 Ohm from 3.0 - 3.8 GHz. 6 LO This pin is AC coupled and matched to 50 Ohm from 3.0 - 3.8 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Application Circuit 7 MIXERS - SMT 7 - 210 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Evaluation PCB 7 MIXERS - SMT List of Materials for Evaluation PCB 105128 [1] Item J1 - J4 C1 C2 L1 U1 PCB [2] Description PCB Mount SMA RF Connector 10 pF Capacitor, 0603 Pkg. .01 μF Capacitor, 0603 Pkg. 1.8 nH Inductor, 0805 Pkg. HMC333 / HMC333E Mixer 103927 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 211