ATF-58143-TR2

Agilent ATF-58143 Low Noise Enhancement Mode Pseudomorphic HEMT in a Surface Mount Plastic Package Data Sheet Features • Low noise and high linearity performance • Enhancement Mode Technology[1] • Excellent uniformity in product specifications Description Agilent Technologies’s ATF-58143 is a high dynamic range, low noise E-PHEMT housed in a 4-lead SC-70 (SOT-343) surface mount plastic package. The combination of high gain, high linearity and low noise makes the ATF-58143 ideal as low noise amplifier for cellular/ PCS/WCDMA base stations, wireless local loop, and other applications that require low noise and high linearity performance in the 450 MHz to 6 GHz frequency range. Surface Mount Package SOT-343 • Low cost surface mount small plastic package SOT-343 (4 lead SC-70) in Tape-and-Reel packaging option available • Lead-free option available Specifications 2 GHz; 3V, 30 mA (Typ.) Pin Connections and Package Marking • 30.5 dBm output 3rd order intercept • 19 dBm output power at 1 dB • 0.5 dB noise figure SOURCE 8Fx DRAIN • 16.5 dB associated gain Applications • Q1 LNA for cellular/PCS/WCDMA base stations • Q1, Q2 LNA and Pre-driver amplifier for 3–4 GHz WLL • Other low noise and high linearity applications at 450 MHz to 6 GHz Note: 1. Enhancement mode technology requires positive Vgs, thereby eliminating the need for the negative gate voltage associated with conventional depletion mode devices. SOURCE GATE Note: Top View. Package marking provides orientation and identification “8F” = Device Code “x” = Date code character identifies month of manufacture. Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A) ESD Human Body Model (Class 0) Refer to Agilent Application Note A004R: Electrostatic Discharge Damage and Control. ATF-58143 Absolute Maximum Ratings [1] Symbol VDS VGS VGD IDS Pdiss Pin max. IGS TCH TSTG θjc Parameter Drain-Source Voltage [2] Gate-Source Voltage [2] Gate Drain Voltage [2] Drain Current [2] Total Power Dissipation [3] RF Input Power Gate Source Current Channel Temperature Storage Temperature Thermal Resistance [4] Units V V V mA mW dBm mA °C °C °C/W Absolute Maximum 5 -5 to 1 -5 to 1 100 500 +135] 2[5] 150 -65 to 150 162 Notes: 1. Operation of this device above any one of these parameters may cause permanent damage. 2. Assumes DC quiescent conditions. 3. Source lead temperature is 25°C. Derate 6.2 mW/°C for TL > 33°C. 4. Thermal resistance measured using 150°C Liquid Crystal Measurement method. 5. The device can handle +13 dBm RF Input Power provided IGS is limited to 2 mA. IGS at P1dB drive level is bias circuit dependent. See applications section for additional information. 120 100 80 IDS (mA) 60 40 20 0 0 1 2 3 4 5 6 7 VDS (V) Figure 1. Typical I-V Curves (VGS=0.1V per step) Product Consistency Distribution Charts [6, 7] -150 Cpk=2.735 Stdev=0.049 -125 -100 -75 -50 -25 0 0.3 0.4 0.5 0.6 NF (dB) 0.7 0.8 15 16 GAIN (dB) 17 18 Cpk=1.953 Stdev=0.2610 Cpk=1.036 Stdev=0.509 28 29 30 31 32 33 34 OIP3 (dBm) Figure 2. NF @ 3V, 30 mA. USL = 0.9, Nominal = 0.5 Figure 3. Gain @ 3V, 30 mA. USL = 18.5, LSL = 15, Nominal = 16.5 Figure 4. OIP3 @ 3V, 30 mA. LSL = 29, Nominal = 30.5 Notes: 6. Distribution data sample size is 500 samples taken from 3 different wafers. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 7. Measurements made on production test board. This circuit represents a trade-off between an optimal noise match and a realizeable match based on production test equipment. Circuit losses have been de-embedded from actual measurements. 2 ATF-58143 Electrical Specifications TA = 25°C, RF parameters measured in a test circuit for a typical device Symbol Vgs Vth Idss Gm Igss NF Parameter and Test Condition Operational Gate Voltage Threshold Voltage Saturated Drain Current Transconductance Gate Leakage Current Noise Figure [1] f = 2 GHz f = 900 MHz f = 2 GHz f = 900 MHz f = 2 GHz f = 900 MHz f = 2 GHz f = 900 MHz f = 2 GHz f = 900 MHz f = 2 GHz f = 900 MHz f = 2 GHz f = 900 MHz f = 2 GHz f = 900 MHz Vds = 3V, Ids = 30 mA Vds = 3V, Ids = 4 mA Vds = 3V, Vgs = 0V Vds = 3V, gm = ∆Idss/∆Vgs; ∆Vgs = 0.75 – 0.7 = 0.05V Vgd = Vgs = -3V Vds = 3V, Ids = 30 mA Vds = 3V, Ids = 30 mA Vds = 4V, Ids = 30 mA Vds = 4V, Ids = 30 mA Vds = 3V, Ids = 30 mA Vds = 3V, Ids = 30 mA Vds = 4V, Ids = 30 mA Vds = 4V, Ids = 30 mA Vds = 3V, Ids = 30 mA Vds = 3V, Ids = 30 mA Vds = 4V, Ids = 30 mA Vds = 4V, Ids = 30 mA Vds = 3V, Ids = 30 mA Vds = 3V, Ids = 30 mA Vds = 4V, Ids = 30 mA Vds = 4V, Ids = 30 mA Units V V µA mmho µA dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm Min. 0.4 0.18 — 230 — — — — — 15 — — — 29 — — — — — — — Typ.[2] 0.51 0.38 1 410 — 0.5 0.3 0.5 0.3 16.5 23.1 17.7 22.5 30.5 28.6 31.5 31.0 19 18 21 19 Max. 0.75 0.52 5 560 200 0.9 — — — 18.5 — — — — — — — — — — — Ga Associated Gain [1] OIP3 Output 3rd Order Intercept Point [1] P1dB 1dB Compressed Output Power [1] Notes: 1. Measurements obtained using production test board described in Figure 5. 2. Typical values determined from a sample size of 500 parts from 3 wafers. 28.2 + j9.4 51 – j3.3 RFin input matching output matching RFout 0.7 dB loss 0.6 dB loss Figure 5. Block diagram of 2 GHz production test board used for Noise Figure, Associated Gain, P1dB and OIP3 measurements. This circuit represents a trade-off between an optimal noise match and associated impedance matching circuit losses. 3 C2 L1 C5 C1 C2 C3 C4 C5 ATF-58143 S J2 C4 S J1 G C1 R1 AGILENT TECHNOLOGIES C3 R1 L1 J1 J2 J3 J4 : 2.7 pF Cap (0603) : 1 pF Cap (0603) : 1200 pF Cap (0603) : 120 pF Cap (0402) : 1200 pF Cap (0603) : 49.9 Ohm (0603) : 56 nH (0603) : 0 Ohm, Jumper (0805) : 0 Ohm, Jumper (0805) : 0 Ohm, Jumper (0402) : 0 Ohm, Jumper (0402) Figure 6. Close-up of Production Test Board. ATF-58143 Typical Performance Curves 0.7 0.8 0.7 0.6 0.6 0.5 GAIN (dB) 3V 4V A 0.5 0.4 0.3 0.2 3V 4V 19 18 17 16 15 14 13 12 0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 Ids (mA) Ids (mA) 3V 4V Fmin (dB) 0.4 0.3 Fmin (dB) 0.1 70 0 0.2 0 10 20 30 40 50 60 Ids (mA) Figure 7. Fmin vs. Ids and Vds Tuned for Max OIP3 and Fmin at 2 GHz. 25 24 23 Figure 8. Fmin vs. Ids and Vds Tuned for Max OIP3 and Fmin at 900 MHz. 42 37 32 27 22 17 12 Figure 9. Gain vs. Ids and Vds Tuned for Max OIP3 and Fmin at 2 GHz. 40 35 OIP3 (dBm) 3V 4V OIP3 (dBm) GAIN (dB) 22 21 20 19 18 0 10 20 30 40 50 60 70 Ids (mA) 3V 4V 30 25 20 3V 4V 15 0 10 20 30 40 50 60 70 0 10 20 30 40 50 60 70 Ids (mA) Ids (mA) Figure 10. Gain vs. Ids and Vds Tuned for Max OIP3 and Fmin at 900 MHz. Figure 11. OIP3 vs. Ids and Vds Tuned for Max OIP3 and Fmin at 2 GHz. Figure 12. OIP3 vs. Ids and Vds Tuned for Max OIP3 and Fmin at 900 MHz. 4 ATF-58143 Typical Performance Curves, continued 24 22 20 18 16 14 12 3V 4V 23 22 21 1.5 P1dB (dBm) P1dB (dBm) 19 18 17 16 15 3V 4V Fmin (dB) 0.5 25°C -40°C 85°C 20 1.0 0 0 10 20 30 40 50 60 70 0 1 2 3 4 5 6 Idq (mA) FREQUENCY (GHz) 0 10 20 30 40 50 60 70 Idq (mA) Figure 13. P1dB vs. Idq and Vds Tuned for [1] Max OIP3 and Fmin at 2 GHz. 30 Figure 14. P1dB vs. Idq and Vds Tuned for [1] Max OIP3 and Fmin at 900 MHz. 35 Figure 15. Fmin vs. Frequency and Temp. Tuned for Max OIP3 and Fmin at 3V, 30 mA. 20.0 19.5 25 30 19.0 P1dB (dBm) 25°C -40°C 85°C OPI3 (dBm) GAIN (dB) 20 25 18.5 18.0 17.5 17.0 16.5 16.0 25°C -40°C 85°C 15 20 10 25°C -40°C 85°C 15 5 0 1 2 3 4 5 6 FREQUENCY (GHz) 10 0 1 2 3 4 5 6 FREQUENCY (GHz) 0 1 2 3 4 5 6 FREQUENCY (GHz) Figure 16. Gain vs. Frequency and Temp. Tuned for Max OIP3 and Fmin at 3V, 30 mA. Figure 17. OIP3 vs. Frequency and Temp. Tuned for Max OIP3 and Fmin at 3V, 30 mA. Figure 18. P1dB vs. Frequency and Temp. Tuned for Max OIP3 and Fmin at 3V, 30 mA. Note: 1. When plotting P1dB, the drain current was allowed to vary dependent on the RF input power. 5 ATF-58143 Typical Scattering Parameters, VDS = 3V, IDS = 30 mA Freq. GHz 0.1 0.5 0.9 1.0 1.5 1.9 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 Mag. 0.98 0.81 0.75 0.73 0.69 0.66 0.65 0.63 0.61 0.61 0.62 0.64 0.66 0.68 0.69 0.71 0.74 0.78 0.84 0.87 0.89 0.90 0.93 0.96 0.94 0.96 0.93 S11 Ang. -17.1 -92.0 -126.4 -132.2 -153.2 -165.9 -169.3 176.3 160.7 147.4 133.8 123.7 112.5 103.7 93.0 77.2 58.3 39.7 25.1 10.2 -3.9 -20.0 -31.4 -43.9 -54.2 -65.1 -79.8 dB 27.29 25.25 21.87 21.18 18.38 16.74 16.40 14.83 13.51 12.35 11.28 10.32 9.41 8.61 7.84 6.47 5.14 3.77 2.55 1.25 0.19 -1.09 -2.53 -4.00 -5.46 -7.14 -8.81 Mag. 23.14 18.31 12.40 11.46 8.31 6.88 6.61 5.51 4.74 4.15 3.66 3.28 2.96 2.70 2.47 2.11 1.81 1.54 1.34 1.16 1.02 0.88 0.75 0.63 0.53 0.44 0.36 S21 Ang. 168.7 123.7 103.4 99.8 85.1 75.4 73.1 61.9 50.9 40.4 30.2 20.5 11.1 2.1 -7.3 -24.8 -43.1 -60.7 -78.8 -97.1 -114.0 -132.2 -148.3 -162.8 -176.5 168.6 153.8 S12 dB -40.10 -28.10 -26.12 -25.87 -24.70 -23.86 -23.65 -22.71 -21.87 -21.10 -20.45 -19.86 -19.39 -18.87 -18.44 -17.63 -17.13 -16.67 -16.21 -16.04 -15.72 -15.86 -16.22 -16.73 -17.15 -17.68 -18.36 Mag. 0.010 0.039 0.049 0.051 0.058 0.064 0.066 0.073 0.081 0.088 0.095 0.102 0.107 0.114 0.120 0.131 0.139 0.147 0.155 0.158 0.164 0.161 0.154 0.146 0.139 0.131 0.121 Ang. 80.8 45.7 34.8 33.4 29.4 27.4 26.9 24.4 21.1 17.7 13.5 9.3 4.9 0.7 -4.4 -14.6 -26.1 -37.0 -50.2 -64.2 -78.3 -93.6 -106.5 -118.2 -128.6 -142.4 -155.6 S22 MSG/MAG Mag. Ang. dB 0.67 0.42 0.32 0.31 0.25 0.23 0.22 0.19 0.17 0.15 0.13 0.13 0.13 0.14 0.14 0.17 0.19 0.24 0.34 0.41 0.46 0.52 0.58 0.66 0.72 0.74 0.77 -12.1 -46.6 -66.7 -72.3 -90.8 -103.6 -106.0 -118.1 -133.3 -145.4 -155.7 -175.4 166.2 152.8 140.7 120.7 95.4 70.1 52.4 37.3 21.5 2.5 -14.1 -26.0 -36.3 -49.0 -64.8 33.69 26.68 23.99 23.52 21.54 20.30 20.03 18.77 17.69 16.73 15.86 15.09 14.40 13.74 13.14 12.06 11.14 10.22 9.39 8.65 7.96 7.39 6.85 6.36 5.85 5.27 4.77 Typical Noise Parameters, VDS = 3V, IDS = 30 mA Freq GHz 0.5 0.9 1.0 1.5 1.9 2.0 2.4 3.0 3.9 5.0 5.8 6.0 Fmin dB 0.12 0.18 0.20 0.32 0.43 0.45 0.51 0.58 0.75 0.87 1.01 1.04 Γopt Mag. 0.39 0.37 0.36 0.32 0.30 0.30 0.29 0.31 0.35 0.42 0.50 0.53 Γopt Ang. 17.775 46.9 53.525 80 101 107.7 125.2 154.475 -156.95 -120.93 -100.83 -97.15 Rn/50 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.05 0.06 0.09 0.15 0.18 Ga dB MSG/MAG and S21 (dB) 40 35 30 25 20 15 10 5 0 -5 -10 -15 0 5 10 FREQUENCY (GHz) 15 20 S21 MSG 25.33 22.26 21.54 19.16 17.65 17.33 16.23 14.77 13.39 11.92 11.07 10.93 Figure 19. MSG/MAG and S21 vs. Frequency at 3V, 30 mA. Notes: 1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements Fmin is calculated. Refer to the noise parameter application section for more information. 2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed within 0.010 inch from each source lead contact point, one via on each side of that point. 6 ATF-58143 Typical Scattering Parameters, VDS = 4V, IDS = 30 mA Freq. GHz 0.1 0.5 0.9 1 1.5 1.9 2 2.5 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Mag. 0.99 0.83 0.76 0.75 0.72 0.71 0.70 0.69 0.68 0.67 0.69 0.73 0.76 0.79 0.82 0.85 0.87 0.89 0.91 0.93 0.94 0.94 0.92 0.91 S11 Ang. -16.3 -94.5 -133.1 -139.7 -162.2 -172.7 -174.9 173.5 161.6 141.9 123.1 108.9 96.3 82.4 71.2 60.1 47.2 36.2 26.6 17.2 9.2 1.2 -10.5 17.6 dB 28.16 25.82 22.52 21.83 18.94 17.18 16.79 14.67 13.05 11.00 9.29 7.73 6.16 4.74 3.63 2.63 1.52 0.38 -0.80 -2.01 -3.24 -4.43 -5.79 -6.74 Mag. 25.6 19.5 13.4 12.3 8.9 7.2 6.9 5.4 4.5 3.5 2.9 2.4 2.0 1.7 1.5 1.4 1.2 1.0 0.9 0.8 0.7 0.6 0.5 0.5 S21 Ang. 169.65 125.68 104.58 100.73 85.42 75.68 73.47 59.58 46.88 28.55 10.32 -7.48 -23.78 -39.33 -55.93 -73.30 -90.53 -106.67 -121.58 -135.15 -148.98 -164.25 -59.55 170.70 S12 dB -41.08 -28.95 -27.00 -26.74 -25.79 -25.25 -25.09 -24.15 -23.33 -22.14 -21.13 -20.28 -19.80 -19.32 -18.49 -17.74 -17.31 -17.12 -17.09 -17.15 -17.22 -17.36 -17.68 -17.94 Mag. 0.01 0.04 0.04 0.05 0.05 0.05 0.06 0.06 0.07 0.08 0.09 0.10 0.10 0.11 0.12 0.13 0.14 0.14 0.14 0.14 0.14 0.14 0.13 0.13 Ang. 81.1 46.2 33.9 32.0 26.9 24.8 24.4 21.7 19.0 14.1 7.3 -1.3 -9.7 -16.9 -26.7 -39.3 -52.2 -64.5 -75.2 -84.2 -94.3 -106.1 -119.3 -127.5 S22 MSG/MAG Mag. Ang. dB 0.65 0.45 0.33 0.31 0.24 0.21 0.21 0.18 0.16 0.13 0.12 0.13 0.17 0.20 0.25 0.31 0.38 0.44 0.49 0.54 0.59 0.64 0.68 0.69 -10.17 -54.83 -76.45 -80.28 -95.17 -104.27 -106.18 -117.35 -124.85 -137.33 -42.65 158.73 125.87 104.88 83.12 61.03 41.33 22.65 6.28 -7.48 -22.78 -39.22 -53.35 -71.73 34.62 27.39 24.76 24.29 22.37 21.21 20.94 19.41 18.19 16.57 15.21 14.00 12.98 12.03 11.06 10.19 9.42 8.75 8.15 7.57 6.99 6.46 5.94 5.60 Typical Noise Parameters, VDS = 4V, IDS = 30 mA Freq GHz 0.5 0.9 1.0 1.5 1.9 2.0 2.4 3.0 3.9 5.0 5.8 6.0 Fmin dB 0.14 0.23 0.25 0.35 0.47 0.49 0.55 0.61 0.78 0.91 1.05 1.11 Γopt Mag. 0.38 0.36 0.35 0.32 0.3 0.3 0.28 0.3 0.35 0.42 0.49 0.53 Γopt Ang. 9.7 44.4 54.0 78.7 100.7 105.4 124.0 153.9 -157.2 -120.8 -101.2 -97.4 Rn/50 0.03 0.04 0.04 0.04 0.04 0.04 0.04 0.05 0.07 0.1 0.16 0.19 Ga dB MSG/MAG and S21 (dB) 40 35 30 25 20 15 10 5 0 -5 -10 0 5 10 FREQUENCY (GHz) 15 20 S21 MSG 24.85 22.21 21.51 19.21 17.71 17.39 16.25 14.86 13.51 12.05 11.14 11.14 Figure 20. MSG/MAG and S21 vs. Frequency at 4V, 30 mA. Notes: 1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements Fmin is calculated. Refer to the noise parameter application section for more information. 2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed within 0.010 inch from each source lead contact point, one via on each side of that point. 7 Ordering Information Part Number ATF-58143-TR1 ATF-58143-TR2 ATF-58143-BLK ATF-58143-TR1G ATF-58143-TR2G ATF-58143-BLKG No. of Devices 3000 10000 100 3000 10000 100 Container 7" Reel 13" Reel antistatic bag 7” Reel 13”Reel antistatic bag Package Dimensions Outline 43 (SOT-343/SC70 4 lead) Notes: 1. All dimensions are in mm. 2. Dimensions are inclusive of plating. 3. Dimensions are exclusive of mold flash and metal blurr. 4. All specifications comply to EIAJ SC70. 5. Die is facing up for mold and facing down for trim/form, i.e., reverse trim/form. 6. Package surface to be mirror finish. Symbol E D HE A A2 A1 b b1 c L MIN. (mm) 1.15 1.85 1.80 0.80 0.80 0.00 0.25 0.55 0.10 0.10 MAX. (mm) 1.35 2.25 2.40 1.10 1.00 0.10 0.40 0.70 0.20 0.46 8 Recommended PCB Pad Layout for Agilent's SC70 4L/SOT-343 Products (Dimensions in inches/mm) Device Orientation REEL TOP VIEW 4 mm END VIEW CARRIER TAPE USER FEED DIRECTION COVER TAPE 8 mm 9 Tape Dimensions For Outline 4T Tape Dimensions and Product Orientation Description Cavity Length Width Depth Pitch Bottom Hole Diameter Diameter Pitch Position Width Thickness Width Thickness Cavity to Perforation (Width Direction) Cavity to Perforation (Length Direction) Symbol Ao Bo Ko P D1 D PO E W t1 C Tt F P2 Size (mm) 2.40 ± 0.10 2.40 ± 0.10 1.20 ± 0.10 4.00 ± 0.10 1.00 + 0.25 1.50 + 0.10 4.00 ± 0.10 1.75 ± 0.10 8.00 + 0.30 - 0.10 0.254 ± 0.02 5.40 ± 0.010 0.062 ± 0.001 3.50 ± 0.05 2.00 ± 0.05 Size (inches) 0.094 ± 0.004 0.094 ± 0.004 0.047 ± 0.004 0.157 ± 0.004 0.039 + 0.010 0.061 + 0.002 0.157 ± 0.004 0.069 ± 0.004 0.315 + 0.012 0.0100 ± 0.0008 0.205 + 0.004 0.0025 ± 0.0004 0.138 ± 0.002 0.079 ± 0.002 Perforlation Carrier Tape Cover Tape Distance For product information and a complete list of Agilent contacts and distributors, please go to our web site. www.agilent.com/semiconductors E-mail: SemiconductorSupport@agilent.com Data subject to change. Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5988-1922EN December 10, 2004 5989-1919EN