CBS95-2P-BL

COMPACT POWER BLOCKS The compact secured and cost-effective solution for power connection From 50 to 300 mm², TS35 and panel mount The Compact Terminal Blocks cover a wide variety of applications from mechanical engineering, industrial equipment, automation to wind turbines, solar energy or switchgears. They offer cost, weight and space savings from optimized aluminum body and compact design. HIGHLY VERSATILE Large scope of conductors accepted The aluminum body combined with specific coating allow the use of aluminum & copper conductors whether round or sectorshaped, solid, stranded or flexible with ferrule. Modularity Available in 2 connection for power connection as well as 4 connections for power distribution purposes. Easy monitoring or supply Blocks from 95 to 300 mm² have an extra built-in measurement tapping connection to provide main supply monitoring or to provide supply to a control equipment. SECURED AND COMPACT CONNECTION EASY TO INSTALL AND USE Protection of connection process, conductor and the operator Compact and firm grip •  Hexagon drive with hex-wrenge for transmission of high torque moments. •  The fine pitch thread allows transmission of high torque moments. •  The turned screw ends prevent damage to the relatively soft aluminium conductor material on installation. •  Reinforced Finger safe and dust protection by side cover when block is not wired. Reduced oxidation risks •  Specific coating reduces oxidation risks with aluminum or copper conductors. •  Push-through plastic protection keep conductors from touching in the middle. ENTRELEC / COMPACT POWER BLOCKS The compact body combines easy snap-on the rail with high and firm grip after being installed. Low drift firm body & cover keeps good alignement even under high torque and cable weight. Light weight body The aluminum body offers a lightweight product easier to stock & install. Two Mounting option All blocks can be mounted on mounting plates or TS 35 rails according to IEC 60715 / DIN EN 50022. Easy identification The large area on top cover of the block allow easy identification with standard or custom labels. COMPACT POWER BLOCKS PRODUCT FEATURES Hexagon drive with hex-wrenge for transmission of high torque moments Protection against conductor contact Fine pitch thread: transmission of high torque moments Turned screw point avoides conductor damages Measurement connection (standard for CBS95 to 300) Ridges on the terminal for better heat dissipation Compact aluminium terminal suitable for the use with copper and aluminium conductors Ridges on the housing for better heat dissipation Round conductor Al/Cu from 50 mm² to 300 mm² Dust and touch-proof cover. Can be cut to match cable dimension Finger-safe as per DIN EN 50274 Flexible installation thanks to screw fixture for plate mounting or TS35 DIN rail foot Approvals Conformity IEC 60947-7-1 IEC 61238-1 (Class A) UL-1059 UL 486E CSA C22.2 No.158-10 ENTRELEC / COMPACT POWER BLOCKS PAGE 2 COMPACT POWER BLOCKS PRODUCT ORDERING INFORMATION Main Tapping Spacing Cross section 50 mm², Single pole Current IEC mm²/AWG mm²/AWG mm in 4-35 / 12-2 - 22 Voltage Function Color UL Type Part Number Accessories Cover/Markers Grey CBS50-2P 1SNF516011R0000 9 Grey/Blue CBS50-2P-BL 1SNF516021R0000 CBS50-Cover (54 Pcs/Pkg) 9 1SNF916710R0000 9 VYT0512: 12x5 mm 5 IEC/UL Cu/AL Cu/AL V 0.87 150 / 150 A 150 / 120 A 1000 / 1000 Grey/Green CBS50-2P-GR 1SNF516031R0000 50 mm², Double pole 6-50 / 10-0 35.6 1.4 Grey CBS50-4P Grey/Blue CBS50-4P-BL 1SNF516121R0000 1SNF516111R0000 Self-adhesive white label 1SNA235837R0000 10-70 / 8-00 1.5-6 / 10-16 25.5 1 232 / 200 A 200 / 155 A 1000 / 1000 Grey CBS95-2P Grey/Blue CBS95-2P-BL 1SNF526021R0000 CBS95-Cover (20 Pcs/Pkg) 2 1SNF926710R0000 2 TAA0917: 17x9 mm 2 1SNF526011R0000 Grey/Green CBS95-2P-GR 1SNF526031R0000 95 mm², Double pole 16-95 / 6-000 1.5-10 / 8-16 47 1.85 Grey CBS95-4P Grey/Blue CBS95-4P-BL 1SNF526121R0000 Self-adhesive rigid white label 1SNF526111R0000 35-150 / 1.5-6 / 00-300 Kcmil 8-16 37.5 1.47 353 A /- 310/ 250 A 1000/ 1000 Grey CBS185-2P 1SNA235776R0000 1 VYT0817: 17x8 mm 1 Self-adhesive white label Grey/Green CBS95-4P-GR 1SNF526131R0000 185 mm², Single pole 5 5 Grey/Green CBS50-4P-GR 1SNF516131R0000 95 mm², Single pole Packing 1SNA235844R0000 1 CBS185-Cover (12 Pcs/Pkg) 1 1SNF936710R0000 1SNF536011R0000 TAA0917: 17x9 mm Self-adhesive rigid white label 95-185 / 1.5-10 / 000-350 Kcmil 10-16 Grey/Blue 1SNA235776R0000 CBS185-2P-BL 1SNF536021R0000 1 VYT0817: 17x8 mm Self-adhesive white label 1SNA235844R0000 300 mm², Single pole 50-240 / 1.5-6 / 250-500 Kcmil 8-16 45 1.77 520 A/- 420/ 340 A 1000/ 1000 Grey CBS300-2P CBS300-Cover (8 Pcs/Pkg) 1 1SNF946710R0000 1SNF546011R0000 TAA0917: 17x9 mm Self-adhesive white label 150-300 / 1.5-10 / 300-600 Kcmil 10-16 Grey/Blue CBS300-2P-BL 1SNF546021R0000 1SNA235776R0000 1 VYT0817: 17x8 mm Self-adhesive white label 1SNA235844R0000 Not allowed Flexible without ferrule (IEC V-K & UL: class 5/6) Flexible with insulated ferrule (IEC V-K & UL: class 5/6) Rigid Solid (IEC V-U class 1, UL solid) Rigid Stranded (IEC V-R class 2, UL class B/C) DIMENSIONS & ELECTRICAL CHARACTERISTICS Power loss for single pole & double pole 50 mm² 185 mm² Dimensions 95 mm² Dimensions 300 mm² Dimensions ENTRELEC / COMPACT POWER BLOCKS Dimensions PAGE 3 Connect With Us We make it easy to connect with our experts and are ready to provide all the support you need. Visit te.com/support to chat with a Product Information Specialist. te.com © 2022 TE Connectivity Ltd. family of companies. All Rights Reserved. ENTRELEC, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. INDUSTRIAL / ENTRELEC COMPACT POWER BLOCKS / BROCHURE / EN ENTRELEC / COMPACT POWER BLOCKS 03/22 BROCHURE TE Connectivity 3, rue Jean Perrin 69687 Chassieu cedex France Tel: +33 481923100