GBL06

GBL005 thru GBL10 GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES ● Surge overload rating - 125 amperes peak ● Ideal for printed circuit board ● Plastic material has underwriters laboratory REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 4.0 Amperes 2GBJ .81(20.6) .77(19.6) .142(3.6) .133(3.4) flammability classification 94V-0 ● Mounting position: Any .125(3.17) *45° Chamfer .106(2.7) .091(2.3) .44(11.2) .42(10.7) .055(1.4) .047(1.2) .56(14.2) .50(12.7) .043(1.1) .035(0.9) .210 .190 (5.3) (4.8) .210 .190 (5.3) (4.8) .210 .190 (5.3) (4.8) .020(0.51) .045(1.14) .015(0.38) .035(0.90) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Maximum Forward Voltage Drop Per Bridge Element at 4.0A Peak Maximum Reverse Current at Rated DC Blocking Voltage Maximum Reverse Current at Rated DC Blocking Voltage Operating Temperature Range Storage Temperature Range Note:1.Mounting conditions,0.5″lead length maximum. @ TA =150℃ @ TA=50℃ (Note1) SYMBOL GBL005 VRRM VRMS VDC I(AV) 50 30 50 GBL01 100 70 100 GBL02 200 140 200 GBL04 400 280 400 4.0 GBL06 600 420 600 GBL08 800 560 800 GBL10 1000 700 1000 UNIT V V V A IFSM 125 A VF IR IR TJ TSTG 1.1 10.0 1.0 -55 to +150 -55 to +150 V uA mA ℃ ℃ ~ 295 ~ RATING AND CHARACTERISTIC CURVES GBL005 thru GBL10 FIG.2-FORWARD DERATING CURRENT 5.0 AVERAGE FORWARD OUTPUT CURRENT AMPERES FIG.1-MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT AMPERES 180 160 4.0 CASE 3.0 120 T J=25℃ 80 2.0 AMBIENT 40 0 1 1.0 SINGLE HALF-SINE-WAVE (JEDEC METHOD) RESISTIVE OR INDUCTIVE LOADS 0 0 50 100 150 AMBIENT TEMPERATURE ℃ 10 NUMBER OF CYCLES AT 60HZ 100 FIG.2-TYPICAL FORWARD CHARACTERISTICS 200 100 INSTANTANEOUS REVERSE CUNRRENT. MICROAMPERES 10 FIG.4-TYPICAL REVERSE CHARACTERISTICS T J=100℃ INSTANTANEOUS FORWARD CURRENT AMPERES T J=25℃ PULSE WIDTH 300us 1.0 10 0.1 T J=25℃ 1.0 T J=25℃ 0.01 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE. VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE ~ 296 ~