S3BB

S3AB thru S3MB SURFACE MOUNT GLASS PASSIVATED RECTIFIERS REVERSE VOLTAGE POWER DISSIPATION - 50 to 1000Volts - 3.0 Amperes FEATURES ● Glass passivated chip ● For surface mounted applications ● Low reverse leakage current ● Low forward voltage drop ● High current capability ● Plastic material has UL flammability SMB .083(2.11) .075(1.91) .155(3.94) .130(3.30) classification 94V-0 .185(4.70) .160(4.06) .012(.305) .006(.152) MECHANICAL DATA ●Case： Molded Plastic ●Polarity:Color band denotes cathode ●Weight: 0.003 ounces,0.093 grams ●Mounting position: Any .096(2.44) .084(2.13) .060(1.52) .030(0.76) .220(5.59) .200(5.08) .008(.203) .002(.051) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed On Rated Load (JEDEC Method) Maximum Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance (Note1) Typical Thermal Resistance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range @TJ=25℃ @TJ=100℃ @TL=75 ℃ SYMBOL VRRM VRMS VDC I(AV) S3AB 50 35 50 S3BB 100 70 100 S3DB 200 140 200 S3GB 400 280 400 3.0 S3JB 600 420 600 S3KB 800 560 800 S3MB 1000 700 1000 UNIT V V V A IFSM VF IR CJ RθJL RθJA TJ TSTG 200 1.2 5.0 250 40 10 50 -55 to +150 -55 to +150 A V uA pF ℃/W ℃/W ℃ ℃ NOTES:1.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance junction to lead. 3.Thermal resistance junction to ambient. ~ 33 ~ RATING AND CHARACTERISTIC CURVES S3AB thru S3MB FIG. 1 - FORWARD CURRENT DERATING CURVE 5.0 AVERAGE FORWARD CURRENT AMPERES 4.0 3.0 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 200 160 120 80 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 1.0 0 25 50 75 100 125 150 175 40 0 1 2 5 10 20 50 100 LEAD TEMPERATURE ℃ NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, (uA ) INSTANTANEOUS FORWARD CURENT,(A) 1000 FIG.4-TYPICAL REVERSE CHARACTERISTICS T J=125℃ 100 1.0 10 1.0 T J=25℃ 0.1 0.1 T J=25℃ PULSE WIDTH 300US 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE,VOLTS PERCENT RATED PEAK REVERSE VOLTAGE,(%) ~ 34 ~