MFL2815D

FEATURES • • • • • • • • • • • • • • –55° to +125°C operation 16 to 40 VDC input Fully Isolated Magnetic feedback Fixed frequency, 600 kHz typical Topology – Single Ended Forward 50 V for up to 50 ms transient protection Inhibit (input & output side) Sync function (in and out) Output trim on single output models Indefinite short circuit protection Remote sense on single output models Up to 87% efficiency / 43 W/in3 Parallelable up to 148 watts DC/DC CONVERTERS 28 VOLT INPUT MFL SERIES 65 WATT MODELS VDC OUTPUT SINGLE 5 12 15 28 DUAL ±5 ±12 ±15 Size (max): 3.005 x 1.505 x 0.400 inches (76.33 x 38.23 x 10.16 mm) Case U Weight: 100 grams maximum Screening: Standard, ES, or 883 (Class H). DESCRIPTION The MFL Series™ 28-volt DC/DC converters are rated up to 65 watts of output power over a –55°C to +125°C temperature range with a 28 Vdc nominal input. On dual output models up to 70% of the rated output power can be drawn from either the positive or negative output. Current sharing allows the units to be paralleled for total power of up to 148watts. The welded, hermetically sealed package is only 3.005 x 1.505 x 0.400 inches, giving the series an overall power density of up to 43 watts per cubic inch. INHIBIT The MFL Series converters have two TTL compatible inhibit terminals (INH1 and INH2) that can be used to disable power conversion, resulting in a very low quiescent input current and no generation of switching noise. An open collector TTL compatible low (