85EPS12J

Bulletin I2139 rev. C 10/02 SAFEIR Series 85EPS.. INPUT RECTIFIER DIODE IF(RMS) = 160A VF IFSM < 1.15V @ 85A = 1400A VRRM 800 and 1200V Major Ratings and Characteristics Characteristics IF(AV) Sine waveform @ TC = 95° C IF(RMS) VRRM range IFSM VF TJ @ 85A, TJ = 25°C range (*) Description/ Features Units A A V A V °C The 85EPS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150° C junction temperature. Available in the new PowIRtabTM package, this new series is suitable for a large range of applications combining excellent die to footprint ratio and sturdeness connectivity for use in high current environments. 85EPS.. 85 160 800 and 1200 1400 1.15 - 40 to 150 Case Styles 85EPS.. 85EPS..J (*) for higher voltage up to 1600V contact factory www.irf.com 1 85EPS.. SAFEIR Series Bulletin I2139 rev. C 10/02 Voltage Ratings Part Number VRRM , maximum peak reverse voltage V 85EPS08 85EPS12 800 1200 VRSM , maximum non repetitive peak reverse voltage V 900 1300 IRRM 150°C mA 3 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IF(RMS) Max. RMS Forward Current IFSM It 2 85EPS.. 85 160 1400 1500 10500 9550 Units A A Conditions @ TC = 95° C, 180° conduction half sine wave Max. Peak One Cycle Non-Repetitive Surge Current Max. I t for fusing 2 10ms Sine pulse, rated V RRM applied A A2 s A √s 2 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated V RRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied I √t 2 Max. I √t for fusing 2 105000 Electrical Specifications Parameters VFM rt Max. Forward Voltage Drop Forward slope resistance 85EPS.. 1.15 3.17 0.86 0.1 3.0 Units V mΩ V mA Conditions @ 85A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VF(TO) Threshold voltage IRM Max. Reverse Leakage Current VR = rated VRRM Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 85EPS.. - 40 to 150 - 40 to 150 0.35 40 0.2 6 (0.21) Min. Max. 6 (5) 12 (10) Units °C °C °C/W °C/W °C/W g (oz.) Kg-cm (Ibf-in) Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style DCoperation Mounting surface , smooth and greased PowIRtabTM 2 www.irf.com 85EPS.. SAFEIR Series Bulletin I2139 rev. C 10/02 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 150 140 130 120 110 100 90 80 70 0 20 40 60 30° 60° 90° Conduction Angle 85EPS.. Series R (DC) = 0.35 °C/W thJC 150 140 130 120 110 100 90 80 70 0 20 30° 40 85EPS.. Series R thJC (DC) = 0.35 °C/W Conduction Period 90° 60° 120° 180° 100 DC 120 140 120° 180° 80 100 60 80 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° RMS Limit Maximum Average Forward Power Loss (W) Fig. 2 - Current Rating Characteristics 180 160 140 120 100 80 60 40 20 0 0 20 40 60 DC 180° 120° 90° 60° 30° RMS Limit Conduction Period 140 120 100 80 60 40 20 0 Conduction Angle 85EPS.. Series T J = 150°C 85EPS.. Series T J = 150°C 80 100 120 140 0 20 40 60 80 100 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics 1000 Instantaneous Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 100 T J= 25°C 10 T J = 150°C 85EPS.. Series 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous Forward Voltage (V) Fig. 5 - Forward Voltage Drop Characteristics www.irf.com 3 85EPS.. SAFEIR Series Bulletin I2139 rev. C 10/02 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) 1600 1500 1400 1300 1200 1100 1000 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 1700 1600 1500 1400 1300 1200 1100 1000 900 800 0.01 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150°C No Voltage Reapplied Rated V RRM Reapplied 85EPS.. Series 900 1 10 100 85EPS.. Series 0.1 Pulse Train Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 6 - Maximum Non-Repetitive Surge Current Transient Thermal Impedance Z thJC (°C/W) 1 Fig. 7 - Maximum Non-Repetitive Surge Current Steady State Value (DC Operation) 0.1 D D D D D = = = = = 0.50 0.33 0.25 0.17 0.08 Single Pulse 85EPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 4 www.irf.com 85EPS.. SAFEIR Series Bulletin I2139 rev. C 10/02 Outline Table Case Style PowIRtabTM Dimensions in millimeters and (inches) Case Style PowIRtabTM "J" version Dimensions in millimeters and (inches) www.irf.com 5 85EPS.. SAFEIR Series Bulletin I2139 rev. C 10/02 Ordering Information Table Device Code 85 1 E 2 P 3 S 4 12 5 J 6 Base Cathode 2 1 2 3 4 5 6 6 - Current Rating Circuit Configuration: E = Single Diode Package: P = PowIRtabTM Type of Silicon: S = Standard Recovery Rectifier Voltage code: Code x 100 = VRRM (*) none=PowIRtabTM standard J = Short Lead Version 08 = 800V 12 = 1200V 1 Anode 3 Anode (*) for higher voltage up to 1600V contact factory Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/02 6 www.irf.com