8ETH03-1

Bulletin PD-20023 rev. C 09/01 8ETH03 8ETH03S 8ETH03-1 Ultrafast Rectifier Features • • • • Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature trr = 35ns IF(AV) = 8Amp VR = 300V Description/ Applications International Rectifier's 300V series are the state of the art Ultrafast recovery rectifiers designed with optimized performance of forward voltage drop and Ultrafast recovery time. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as freewheeling diodes in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM TJ, TSTG Repetitive Peak Reverse Voltage Average Rectified Forward Current Non Repetitive Peak Surge Current @T @T C J Max 300 = 1 55°C = 2 5°C 8 100 - 65 to 175 Units V A °C Operating Junction and Storage Temperatures Case Styles 8ETH03 8ETH03S 8ETH03-1 Base Cathode Base Cathode 2 2 1 3 1 3 1 3 Cathode Anode N/C Anode N/C Anode TO-220AC www.irf.com D2PAK TO-262 1 8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 300 1.0 1.25 V V V µA µA pF nH I R = 100µA I F = 8A I F = 8A, TJ = 125°C V R = VR Rated T J = 125°C, VR = VR Rated V R = 300V Measured lead to lead 5mm from package body 0.83 1.00 0.02 6.0 31 8 20 200 - IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 27 40 2.2 5.3 30 106 35 nC A ns I F = 1A, diF/dt = -50A/µs, VR = 30V TJ = 25°C TJ = 125°C T J = 25°C TJ = 125°C T J = 25°C TJ = 125°C IF = 8A diF /dt = - 200A/µs VR = 200V IRRM Peak Recovery Current - Qrr Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC RthJA ! RthCS " Min - 65 - 65 Per Leg Per Leg - Typ 1.45 0.2 2.0 0.07 - Max 175 175 2.5 70 12 10 Units °C Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight °C/W g (oz) Kg-cm lbf.in Mounting Torque 6.0 5.0 ! Typical Socket Mount "# Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 100 Reverse Current - I R (µA) 1000 100 10 1 0.1 25˚C Tj = 175˚C 150˚C 125˚C 100˚C Instantaneous Forward Current - I F (A) 0.01 0.001 0 10 50 100 150 200 250 300 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 1000 Junction Capacitance - C T (pF) T J = 25˚C Tj = 175˚C Tj = 125˚C Tj = 25˚C 100 1 0.4 10 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 50 100 150 200 250 300 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics 10 (°C/W) Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 1 Thermal Impedance Z D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 thJC PDM t1 t2 0.1 . . 0.01 0.00001 2. Peak Tj = Pdm x ZthJC + Tc 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 180 Allowable Case Temperature (°C) Average Power Loss ( Watts ) 10 8 6 4 2 0 0 2 4 6 8 10 12 14 RMS Limit 170 DC 160 150 Square wave (D = 0.50) Rated Vr applied DC D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 140 see note (3) 130 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current 0 2 4 6 8 10 12 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics 100 1000 Qrr ( nC ) If = 8A, Tj = 125˚C trr ( ns ) If = 8A, Tj = 125˚C 100 If = 8A, Tj = 25˚C If = 8A, Tj = 25˚C 10 100 di F /dt (A/µs ) 1000 10 100 di F /dt (A/µs ) 1000 Fig. 7 - Typical Reverse Recovery vs. di F /dt Fig. 8 - Typical Stored Charge vs. di F /dt (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 4 www.irf.com 8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. di F /dt dif/dt ADJUST D G IRFP250 S Fig. 1 - Reverse Recovery Parameter Test Circuit 3 IF 0 trr ta tb 4 2 Q rr I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 di fF/dt /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 2 - Reverse Recovery Waveform and Definitions www.irf.com 5 8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 1 14.09 (0.55) 13.47 (0.53) 3 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) 2.92 (0.11) 2.54 (0.10) TERM 2 DIA. 6.48 (0.25) 6.23 (0.24) 2° 1.32 (0.05) 1.22 (0.05) Base Cathode 1 3 Cathode Anode 1 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) Base Cathode 2 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED F OOTPRINT 11.43 (0.45) 1 3 N/C Anode 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Conforms to JEDEC Outline D2PAK Dimensions in millimeters and (inches) 6 www.irf.com 8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Outline Table 2 1 3 N/C Conforms to JEDEC Outline TO-262 Dimensions in millimeters and (inches) Anode Marking Information EXAMPLE: THIS IS A 8ETH03 LOT CODE 1789 ASSEMBLED ON WW 19, 1997 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 1997 WEEK 19 LINE C www.irf.com 7 8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Ordering Information Table Device Code 8 1 E 2 T 3 H 4 03 5 -1 6 1 2 3 4 5 6 - Current Rating (8 = 8A) E T H = Single Diode = TO-220, D2Pak = HyperFast Recovery Voltage Rating (03 = 300V) "-1" = TO-262 Option S = D2Pak None = TO-220AC Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/01 8 www.irf.com