GP12MABE

C&K GP Series Sealed Ultraminiature Pushbutton Switches Features/Benefits • Ultraminiature design saves space • Process compatible, withstands most soldering and washing processes • Thru-hole and surface mount models available • Sealed construction—internal o-ring and epoxy base • RoHS compliant Typical Applications • Telecommunications and network equipment • Computers and peripheral products • Instrumentation A Pushbutton Specifications CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max. MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 50 mΩ typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109Ω min. DIELECTRIC STRENGTH: 500 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. PACKAGING: Surface mount switches standard in anti-static tape and reel packaging per EIA 481-3, see page A-78 for drawings and reel information. All models are RoHS compliant and compliant. Materials HOUSING & BASE: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0). ACTUATOR: Glass filled nylon 4/6, flame retardant (UL 94V-0) with standard internal o-ring seal. SWITCH SUPPORT: Brass, tin plated. MOVABLE CONTACT: Copper alloy, with gold plate over nickel plate. STATIONARY CONTACTS Copper alloy, with gold plate over nickel plate. TERMINALS: Copper alloy, with gold flash over nickel plate. TERMINAL SEAL: Epoxy/Urethane. All terminals insert molded. NOTE: Any models supplied with B contact material are RoHS compliant and compatible. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Materials listed above are general specifications. Specifications available for specific and custom switches, consult Customer Service Center. CAUTION: PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity. How To Order Complete part numbers for GP Series Sealed Ultraminiature Pushbutton Switches are shown on pages A-76 thru A-78. SWITCH FUNCTION POS.1 PART NUMBER POS. 2 SCHEMATIC OFF OPEN MOM. 1-3 GP11MCBE Conn. Terms. SPST Terminal nos. for reference only. GP11MCBE SPST GP12MCBE Conn. Terms. MOM. = Momentary ON 2-1 MOM. 2-3 SPDT GP12 Model Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–75 www.ittcannon.com C&K GP Series Sealed Ultraminiature Pushbutton Switches A Pushbutton SWITCH FUNCTION POS.1 PART NUMBER POS. 2 SCHEMATIC OFF OPEN MOM. 1-3 GP11MABE GP11MABE SPST Conn. Terms. Terminal nos. for reference only. SPST GP12MABE Conn. Terms. MOM. = Momentary ON 2-1 MOM. 2-3 SPDT GP12 Model SMT SWITCH FUNCTION POS.1 PART NUMBER POS. 2 SCHEMATIC OFF OPEN MOM. 1-3 GP11MSABE SPST GP11MSABE Conn. Terms. SPST GP12MSABE Conn. Terms. MOM. = Momentary ON 2-1 MOM. 2-3 SPDT SMT SWITCH FUNCTION POS.1 POS. 2 SCHEMATIC OFF OPEN MOM. 1-3 GP11MSA1BE SPST PART NUMBER GP11MSA1BE Conn. Terms. SPST GP12MSA1BE Conn. Terms. MOM. = Momentary ON 2-1 MOM. 2-3 SPDT Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–76 www.ittcannon.com C&K GP Series Sealed Ultraminiature Pushbutton Switches A Pushbutton SWITCH FUNCTION POS.1 PART NUMBER POS. 2 SCHEMATIC ON 2-1 MOM. 2-3 Terminal nos. for reference only. PC MOUNTING SMT GP12MSCBE Conn. Terms. MOM. = Momentary SPDT GP12MSCBE SPDT NOTE: Recommended for infrequent use applications only For increased switch mounting strength, order, SV1 termination style with support bracket (see below). SMT GP11MSV1BE SPST SWITCH FUNCTION POS.1 PART NUMBER POS. 2 SCHEMATIC OFF OPEN MOM. 1-3 PC MOUNTING GP11 MODELS GP11MSV1BE Conn. Terms. SPST GP12MSV1BE Conn. Terms. MOM. = Momentary ON 2-1 MOM. 2-3 SPDT Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–77 www.ittcannon.com C&K GP Series Sealed Ultraminiature Pushbutton Switches A Pushbutton For part numbers GP11MSV1BE, GP12MSV1BE TAPE & REEL .079 (2,00) .157 (4,00) FEED DIRECTION ø0.059 (ø1,50) .069 (1,76) .299 (7,60) REEL INFORMATION OUTSIDE DIAMETER PILOT HOLE QUANTITY PER REEL 13.00 (330,0) .512 (13,0) 600 .453 (11,51) .945 (24,00) GP12MSV1BE GP11MSV1BE For part numbers GPXXSA1BE, GPXXMCBE, GPXXMSABE REEL INFORMATION OUTSIDE DIAMETER PILOT HOLE QUANTITY PER REEL 13.00 (330,0) .512 (13,0) 600 For part numbers GP12MSCBE REEL INFORMATION OUTSIDE DIAMETER PILOT HOLE QUANTITY PER REEL 13.00 (330,0) .512 (13,0) 600 B Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–78 www.ittcannon.com