SK510

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD SMCG Plastic-Encapsulate Diodes SK 52 THRU SK520 Schottky Rectifier Diodes Features SMCG ● IF(AV) 5A ● VRRM 20V-200V ● High surge current capability ● Polarity: Color band denotes cathode Applications ● Rectifier Marking ● SK5X X : From 2 To 20 Item Symbol Unit SK 5 Test Conditions 2 3 4 5 6 8 10 15 20 Repetitive Peak Reverse Voltage VRRM V 20 30 40 50 60 80 100 150 200 Maximum RMS Voltage VRMS V 14 21 28 35 42 56 70 105 140 Average Forward Current IF(AV) A 60HZ Half-sine wave, Resistance load, TL(Fig.1) 5.0 Surge(Non-repetitive)Forward Current IFSM A 60Hz Half-sine wave , 1 cycle , Ta =25℃ 150 TJ ℃ TSTG ℃ Junction Temperature Storage Temperature -50~+125 -50~+150 -50 ~ +150 Electrical Characteristics (T=25℃ Unless otherwise specified） Item Peak Forward Voltage Peak Reverse Current Thermal Resistance(Typical) Symbol Unit VF IRRM1 IRRM2 RθJ-A RθJ-L ℃/ W 2 IF =5.0A V mA SK 5 Test Condition VRM=VRRM 3 4 5 6 10 15 Ta =25℃ 0.5 0.1 Ta =100℃ 10 0.5 Between junction and ambient 471) Between junction and terminal 131) 20 0.95 0.85 0.7 0.55 8 Notes: 1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.6" x 0.6" (16 mm x 16 mm) copper pad areas www.jscj-elec.com 1 Rev. - 1.0 Typical Characteristics FIG.2: MAXIMUM NON-REPETITIVE FORWARD URGE CURRENT IFSM(A) IO(A) FIG.1: FORWARD CURRENT DERATING CURVE 6.0 SK52-SK54 SK55-SK520 5.0 150 8.3ms Single Half Sine Wave JEDEC Method 120 4.0 90 3.0 60 2.0 30 Resistive or Inductive Load P.C.B. Mounted on 0.6"×0.6" (16mm×16mm)Copper Pad Areas 1.0 0 0 75 50 25 125 100 0 150 1 2 10 Number of Cycles FIG.4：TYPICAL REVERSE CHARACTERISTICS IR(mA) IF(A) FIG.3: TYPICAL FORWARD CHARACTERISTICS 100 100 20 TL(℃) TJ=25 ℃ Pulse width=300us 1% Duty Cycle 100 SK 52-SK 56 SK 58-SK 520 10 10 Tj=125℃ 5.0 1.0 1.0 Tj=75℃ 0.1 SK SK SK SK 0.1 52-SK 54 55-SK 56 58-SK 510 515-SK 520 0.01 Tj=25℃ 0.001 0.01 0 0.2 www.jscj-elec.com 0.4 0.6 0.8 1.0 1.2 1.4 VF(V) 0 20 40 60 80 100 Voltage(%) 2 Rev. - 1.0 SMCG Package Outline Dimensions 0.108 (2.75) 0.217(5.50) 0.123 (3.25) 0.240(6.10) 0.256(6.50) 0.280(7.10) 0.007(0.17) 0.012(0.30) 0.087(2.2) 0.106(2.7) 0.035(0.90) 0.008(0.203)MAX. 0.055(1.40) 0.291(7.40) 0.331(8.40) Dimensions in inches and (millimeters) SMCG Suggested Pad Layout 3.5 6.5 1.8 NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein.JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 3 Rev. - 1.0 Reel Taping Specifications For Surface Mount Devices-SMCG FIG:CONFIGURATION OF SURFACE MOUNTED DEVICES TAPING SMCG 75 1.0 2.95 0.039 www.jscj-elec.com 4 Rev. - 1.0