AA11142MBC

11mm x 1.4mm BACKLIGHT ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES AA1114/2MBC/CC BLUE Features LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHTING. RoHS COMPLIANT. Description The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. S PEC NO: DSAB2775 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/21/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1201000010 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA1114/2MBC/CC BLUE (GaN) WATER CLEAR 4 Typ. 10 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 430 466 60 100 3.8 4.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Blue 105 30 150 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V S PEC NO: DSAB2775 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/21/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1201000010 Blue AA1114/2MBC/CC S PEC NO: DSAB2775 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/21/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1201000010 PACKING & LABEL SPECIFICATIONS AA1114/2MBC/CC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAB2775 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/21/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1201000010