HAS400-S

Current Transducers HAS 50 to 600-S For the electronic measurement of currents: DC, AC, pulsed, mixed, with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit). IPN = 50 .. 600 A ±4V VOUT = Electrical data Primary nominal r.m.s. current IPN (A) 50 100 200 300 400 500 600 Primary current measuring range IP (A) ± 150 ± 300 ± 600 ± 900 ± 900 ± 900 ± 900 Type HAS 50-S HAS 100-S HAS 200-S HAS 300-S HAS 400-S HAS 500-S HAS 600-S Features • Hall effect measuring principle • Galvanic isolation between primary • • • • and secondary circuit Isolation voltage 3000 V~ Low power consumption Extended measuring range (3 x IPN) Insulated plastic case made of polycarbonate PBT recognized according to UL 94-V0 VC IC IOC Vd Vb RIS VOUT 40 m V ROUT RL Supply voltage (± 5 %) Current consumption Overload capacity R.m.s. voltage for AC isolation test, 50/60 Hz, 1 mn R.m.s. rated voltage, safe separation Isolation resistance @ 500 VDC Output voltage @ ± IPN, RL = 10 kΩ , TA = 25°C Output internal resistance Load resistance ± 15 ± 15 30,000 3 5001) > 1000 V mA At kV V MΩ ± 4V ± Ω kΩ Advantages • Easy mounting • Small size and space saving • Only one design for wide current • High immunity to external ratings range interference. approx. 100 >1 Accuracy - Dynamic performance data X ε L VOE VOH VOT TCε G tr di/dt f Accuracy @ IPN, TA = 25°C (without offset) Linearity 2) (0 .. ± IPN) Electrical offset voltage, TA = 25°C Hysteresis offset voltage @ IP = 0; after an excursion of 1 x IPN Thermal drift of VOE HAS 50-S HAS 100 to HAS 600-S Thermal drift of the gain (% of reading) Response time @ 90% of IP di/dt accurately followed Frequency bandwidth (- 3 dB) 3)