2089

2089 Series Two-, Four-, & Eight-Way Isolated Power Dividers Wilkinson Features • • • • • Excellent Amplitude and Phase Balance High Isolation between Output Ports Low VSWR, Small Size and Light Weight Octave and Multi-Octave Frequency Coverage Power: 10 Watts Input Maximum with Matched Terminations Rev. V3 Description and Applications This series of two-way, in-phase stripline power dividers demonstrates excellent performance as well as small size and light weight. These octave and multi-octave power dividers have high isolation, low VSWR and excellent amplitude and phase balance. Note: All dimensions are ± .020, except mounting hole diameters (± .005) and mounting hole location (± .010) . Typical Performance Part No. 2089-6208-00 Two-Way Isolated Power Divider Specifications Part No. Frequency Range (GHz) VSWR (max.) Isolation dB (min.) Insertion Loss dB (max.) Output Unbalance Amp. (dB) 0.2 0.2 0.2 0.25 0.25 0.2 0.25 0.25 0.25 0.25 Phase (deg.) 4.0 4.0 6.0 6.0 6.0 4.0 8.0 8.0 8.0 8.0 Maximum Input Power* (watts) 2.0 2.0 2.0 2.0 3.0 4.0 4.0 10.0 4.0 3.0 Size, Inches (mm) A 2.0 (50.8) 2.0 (50.8) 1.38 (35) 1.38 (35) 1.38 (35) 2.8 (71.2) 2.25 (57.2) 2.25 (57.2) 1.63 (41.4) 1.38 (35) B 0.5 (12.7) 0.5 (12.7) 0.4 (10.2) 0.4 (10.2) 0.4 (10.2) 1.4 (35.6) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.4 (10.2) Weight oz. 1.5 1.5 1.2 1.2 1.2 2.0 1.3 1.3 1.3 1.2 g 43 43 35 35 35 57 37 37 37 35 2089-6201-00 2089-6202-00 2089-6203-00 2089-6204-00 2089-6205-00 2089-6206-00 2089-6207-00 2089-6208-00 2089-6209-00 2089-6210-00 1.0-2.0 2.0-4.0 4.0-8.0 8.0-12.4 12.4-18.0 0.5-2.0 2.0-8.0 2.0-18.0 4.0-18.0 7.0-18.0 1.25 1.35 1.35 1.60 1.70 1.30 1.50 1.60 1.60 1.70 20 20 20 20 17 20 18 17 17 17 0.25 0.25 0.3 0.4 0.6 0.4 0.4 1.0 0.6 0.6 * Maximum input power with output loads of VSWR < 2.0:1. Derate to 10% of listed value when arbitrarily terminated. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. 2089 Series Two-, Four-, & Eight-Way Isolated Power Dividers Wilkinson Features • • • • • • Octave and Multi-Octave Frequency Coverage Low Insertion Loss Excellent Phase Balance High Isolation between Output Ports Low VSWR Power: 20 Watts Maximum Rev. V3 Description and Applications These four-way in-phase power dividers combine excellent strip transmission line design techniques with small size and light weight and still achieve superb performance over wide multi-octave frequency ranges as well as over single octave bandwidths. These units may be used in reverse to combine inphase signals applied to them. They can be custom designed to your particular application. Note: All dimensions are ± .020, except mounting hole diameters (± .005) and mounting hole location (± .010) . Typical Performance Part No. 2089-6408-00 Four-Way Isolated Power Divider Specifications Part No. Frequency Range (GHz) VSWR (max.) Isolation dB (min.) Insertion Loss dB (max.) Output Unbalance Amp. (dB) 0.40 0.40 0.40 0.50 0.50 0.40 0.50 0.50 0.50 0.50 Phase (deg.) 6 6 8 8 8 6 12 12 12 12 Maximum Input Power* (watts) 4.0 4.0 4.0 4.0 6.0 4.0 8.0 20.0 8.0 6.0 Size, Inches (mm) A 3.0 (76.2) 2.0 (50.8) 2.0 (50.8) 2.0 (50.8) 2.0 (50.8) 2.92 (74.2) 4.0 (102) 3.0 (76.2) 2.0 (50.8) 2.0 (50.8) B Weight oz. 4.0 2.8 2.8 2.8 2.8 4.0 5.2 4.0 2.8 2.8 g 115 80 80 80 80 115 149 115 80 80 2089-6401-00** 2089-6402-00 2089-6403-00 2089-6404-00 2089-6405-00 2089-6406-00 2089-6407-00 2089-6408-00 2089-6409-00 2089-6410-00 1.0-2.0 2.0-4.0 4.0-8.0 8.0-12.4 12.4-18.0 0.5-2.0 2.0-8.0 2.0-18.0 4.0-18.0 7.0-18.0 1.35 1.35 1.50 1.70 1.70 1.45 1.60 1.70 1.70 1.60 20 20 20 18 15 20 18 17 15 15 0.50 0.50 0.50 0.75 1.20 0.70 0.80 1.80 1.20 1.20 0.63 (15.9) * Maximum input power with output loads of VSWR < 2.0:1. Derate to 10% of listed value when arbitrarily terminated. ** These units have four mounting holes symmetrically located as shown. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. 2089 Series Two-, Four-, & Eight-Way Isolated Power Dividers Wilkinson Features • • • • Octave and Multi-Octave Frequency Coverage Excellent Amplitude and Phase Balance Low Insertion Loss Low VSWR Rev. V3 Description and Applications These eight-way in-phase power divides combine reliable strip transmission line design techniques with small size and light weight to achieve excellent performance over octave and multi-octave frequency ranges. They may also be used to combine in-phase signals applied at the outputs. SMA female connectors are standard. All dimensions are ± .020, except mounting hole diameters (± .005) and mounting hole location (± .010) . Typical Performance Part No. 2089-6803-00 Eight-Way Isolated Power Divider Specifications Part No. Frequency Range (GHz) VSWR (max.) Isolation dB (min.) Insertion Loss dB (max.) 1.0 1.0 1.5 1.7 2.2 1.5 2.0 3.3 2.5 Output Unbalance Amp. (dB) 0.8 0.8 0.8 0.8 0.8 0.8 1.2 1.8 1.5 Phase (deg.) 8 10 16 16 24 8 16 24 24 Maximum Input Power* (watts) 6.0 6.0 6.0 6.0 10.0 12.0 12.0 30.0 10.0 Size, Inches A 4.5 4.0 4.0 4.0 4.0 4.5 4.0 4.5 4.0 B 5.0 2.0 2.0 2.0 2.0 5.0 2.0 5.0 2.0 H 1.0 0.5 0.5 0.5 0.5 1.0 0.5 1.0 0.5 I 0.50 0.25 0.25 0.25 0.25 0.50 0.25 0.50 0.25 Weight (NOM.) oz. 2089-6801-00 2089-6802-00 2089-6803-00 2089-6804-00 2089-6805-00 2089-6806-00 2089-6807-00 2089-6808-00 2089-6810-00 1.0-2.0 2.0-4.0 4.0-8.0 8.0-12.4 12.4-18.0 0.5-2.0 2.0-8.0 2.0-18.0 7.0-18.0 1.5:1 1.5:1 1.6:1 1.7:1 1.7:1 1.5:1 1.6:1 1.8:1 1.8:1 20 18 15 15 15 20 15 15 15 15 12 12 12 12 15 12 15 12 * Maximum input power with output loads of VSWR < 2.0:1. Derate to 10% of listed value when arbitrarily terminated. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.