MASWSS0091

MASWSS0091 GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Features • • • • • • Supplied as Known Good Die Dual/tri/quad-band GSM/GPRS/EDGE Low Voltage: 2.5V Operation Low Harmonics: -72 dBc at +35 dBm & 1 GHz Low Insertion Loss: 0.5 dB at 1 GHz High Tx-Rx Isolation: 38 dB at 2 GHz Rev. V7 Die Layout Tx1 VTx1 ANT VTx2 Tx2 ANT Description M/A-COM’s MASWSS0091 is a GaAs PHEMT MMIC single pole six throw (SP6T) high power switch die. The MASWSS0091 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. The MASWSS0091 is designed for dual-, tri-, and quad-band GSM and DCS/PCS handset systems that connect separate transmit and receive functions to a common antenna, and can be used in all systems operating up to 2.5 GHz requiring high power at low control voltage. The MASWSS0091 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. VRx1 Rx1 GND Rx2 VRx2 VRxC VRx3 Rx3 GND Rx4 VRx4 Pad Layout PAD Name Tx1 VTx1 ANT VTx2 Tx2 VRx4 Rx4 Description Tx1 Port Tx1 Control Antenna Port Tx2 Control Tx2 Port Rx4 Control Rx4 Port Ground Rx3 Port Rx3 Control Rx Common Control Rx2 Control Rx2 Port Ground Rx1 Port Rx1 Control Redundant ANT Pad Ordering Information 1 Part Number MASWSS0091SMB MASWSS0091-DIE 1. Die quantity varies. Package Sample Test Board Separated die on Grip Ring GND Rx3 VRx3 VRxC VRx2 Absolute Maximum Ratings 2 Parameter Input Power (0.5 - 2.5 GHz, 2.5V Control) Voltage Operating Temperature Storage Temperature Rx2 GND Rx1 VRx1 ANT Absolute Maximum +38 dBm ±8.5 volts -40°C to +85°C -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to the device. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0091 GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Electrical Specifications: TA = 25°C, Vc = 0V/2.5V, Z0 = 50 Ohms 3 Parameter Tx Insertion Loss4 Rx Insertion Loss3 Tx to Rx Isolation Tx to Tx Isolation Return Loss Tx P0.1dB Rx P1dB 2nd Harmonic 3rd Harmonic Trise, Tfall Ton, Toff Transients Control Current Rev. V7 Test Conditions 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 2.5 GHz 1 GHz 1 GHz 1 GHz, PIN = +35 dBm, 100% Duty Cycle 1 GHz, PIN = +35 dBm, 100% Duty Cycle 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF In Band — Units dB dB dB dB dB dB dB dB dB dBm dBm dBc dBc μS μS mV µA Min. — — — — 40 — 22 — — — — — — — — — — Typ. 0.5 0.65 1.0 1.3 45 38 26 17 20 41 25 -78 -72 0.2 0.2 70 20 Max. 0.7 0.9 1.2 1.6 — — — — — — — -67 -67 — — — 80 3. External DC blocking capacitors are required on all RF ports. 4. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 0.5 GHz - 2.0 GHz. Functional Schematic 100pF 100pF 100pF Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Tx1 VTx1 ANT VTx2 Tx2 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity VRxC Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. VRx4 VRx1 VRx2 VRx3 Rx1 GND Rx2 Rx3 GND Rx4 100pF 100pF 100pF 100pF 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0091 GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Typical Performance Curves TX Insertion Loss +25°C 1 .0 +85°C -40°C Rev. V7 RX Insertion Loss +25° C +85° C -40° C Insertion Loss (dB) 2.0 1 .6 1 .2 0.8 0.4 0.0 0.0 Insertion Loss (dB) 0.8 0.6 0.4 0.2 0.0 0.0 0.5 1 .0 1 .5 2.0 2.5 3.0 0.5 1 .0 1 .5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) TX - RX Isolation +25°C 60 55 +85°C -40°C 2nd Harmonic vs. Vctrl @ 1 GHz, Pin = +35 dBm, 100% Duty Cycle +25°C +85°C -40°C -60 -65 -70 -75 -80 -85 -90 2.0 2.5 3.0 3.5 4.0 4.5 5.0 50 45 40 35 30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Relative Harmonic (dBc) Isolation (dB) F re que nc y ( G H z) Vctrl (V) 3rd Harmonic vs. Vctrl @ 1 GHz, Pin = +35 dBm, 100% Duty Cycle +C 25° +C 85° -40° C Relative Harmonic (dBc) -60 -65 -70 -75 -80 -85 2.5 3.0 3.5 4.0 4.5 5.0 -90 2.0 Vctrl (V) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0091 GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Truth Table 5,6 VTx1 VTx2 VRxC VRx1 VRx2 VRx3 VRx4 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 1 1 1 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 Rev. V7 ANT-Tx1 On Off Off Off Off Off ANT-Tx2 ANT-Rx1 ANT-Rx2 ANT-Rx3 ANT-Rx4 Off On Off Off Off Off Off Off On Off Off Off Off Off Off On Off Off Off Off Off Off On Off Off Off Off Off Off On 5. Differential voltage, V (state 1) -V (state 0), must be 2.5 V minimum. 6. State 0 = 0 V to +0.2 V, State 1 = 2.5 V to 5 V. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.