MASWSS0091-DIE

GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Features • • • • • • Supplied as Known Good Die Dual/tri/quad-band GSM/GPRS/EDGE Low Voltage: 2.5V Operation Low Harmonics: -72 dBc at +35 dBm & 1 GHz Low Insertion Loss: 0.5 dB at 1 GHz High Tx-Rx Isolation: 38 dB at 2 GHz MASWSS0091 V6 Die Layout Tx1 VTx1 ANT VTx2 Tx2 Description M/A-COM’s MASWSS0091 is a GaAs PHEMT MMIC single pole six throw (SP6T) high power switch die. The MASWSS0091 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. The MASWSS0091 is designed for dual-, tri-, and quad-band GSM and DCS/PCS handset systems that connect separate transmit and receive functions to a common antenna, and can be used in all systems operating up to 2.5 GHz requiring high power at low control voltage. The MASWSS0091 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. ANT VRx1 Rx1 GND Rx2 VRx2 VRxC VRx3 Rx3 GND Rx4 VRx4 Pad Layout PAD Name Tx1 VTx1 ANT VTx2 Tx2 VRx4 Rx4 Description Tx1 Port Tx1 Control Antenna Port Tx2 Control Tx2 Port Rx4 Control Rx4 Port Ground Rx3 Port Rx3 Control Rx Common Control Rx2 Control Rx2 Port Ground Rx1 Port Rx1 Control Redundant ANT Pad Ordering Information Part Number MASWSS0091SMB MASWSS0091-DIE Note: Die quantity varies. Package Sample Test Board Separated die on Grip Ring GND Rx3 VRx3 VRxC VRx2 Rx2 Absolute Maximum Ratings 1 Parameter Input Power (0.5 - 2.5 GHz, 2.5V Control) Voltage Operating Temperature Storage Temperature GND Rx1 Absolute Maximum +38 dBm ±8.5 volts -40°C to +85°C -65°C to +150°C VRx1 ANT 1. Exceeding any one or combination of these limits may cause permanent damage to the device. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Electrical Specifications: TA = 25°C, Vc = 0V/2.5V, Z0 = 50 Ohms 2 Parameter Tx Insertion Loss3 Rx Insertion Loss3 Tx to Rx Isolation Tx to Tx Isolation Return Loss Tx P0.1dB Rx P1dB 2nd Harmonic 3rd Harmonic Trise, Tfall Ton, Toff Transients Control Current MASWSS0091 V6 Test Conditions 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 1 GHz 1 - 2 GHz 0.5 - 2.5 GHz 1 GHz 1 GHz 1 GHz, PIN = +35 dBm, 100% Duty Cycle 1 GHz, PIN = +35 dBm, 100% Duty Cycle 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF In Band — Units dB dB dB dB dB dB dB dB dB dBm dBm dBc dBc µS µS mV µA Min. — — — — 40 — 22 — — — — — — — — — — Typ. 0.5 0.65 1.0 1.3 45 38 26 17 20 41 25 -78 -72 0.2 0.2 70 20 Max. 0.7 0.9 1.2 1.6 — — — — — — — -67 -67 — — — 80 2. External DC blocking capacitors are required on all RF ports. 3. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 0.5 GHz - 2.0 GHz. Functional Schematic 100pF 100pF 100pF Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Tx1 VTx1 ANT VTx2 Tx2 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity VRxC VRx1 VRx2 VRx3 VRx4 Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Rx1 GND Rx2 Rx3 GND Rx4 100pF 100pF 100pF 100pF 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Typical Performance Curves TX Insertion Loss +25°C 1.0 0.8 0.6 0.4 0.2 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 +85°C -40°C 2.0 1.6 1.2 0.8 0.4 0.0 0.0 MASWSS0091 V6 RX Insertion Loss +25°C +85°C -40°C Insertion Loss (dB) Insertion Loss (dB) 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) TX - RX Isolation +25°C 60 +85°C -40°C 2nd Harmonic vs. Vctrl @ 1 GHz, Pin = +35 dBm, 100% Duty Cycle +25°C -60 +85°C -40°C Relative Harmonic (dBc) 55 -65 -70 -75 -80 -85 -90 Isolation (dB) 50 45 40 35 30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency (GHz) Vctrl (V) 3rd Harmonic vs. Vctrl @ 1 GHz, Pin = +35 dBm, 100% Duty Cycle +25°C +85°C -40°C Relative Harmonic (dBc) -60 -65 -70 -75 -80 -85 -90 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Vctrl (V) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. GaAs SP6T 2.5 V High Power Switch Dual / Tri / Quad-Band GSM Applications Truth Table 4,5 VTx1 VTx2 VRxC VRx1 VRx2 VRx3 VRx4 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 1 1 1 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 MASWSS0091 V6 ANT-Tx1 On Off Off Off Off Off ANT-Tx2 ANT-Rx1 ANT-Rx2 ANT-Rx3 ANT-Rx4 Off On Off Off Off Off Off Off On Off Off Off Off Off Off On Off Off Off Off Off Off On Off Off Off Off Off Off On 4. Differential voltage, V (state 1) -V (state 0), must be 2.5 V minimum. 5. State 0 = 0 V to +0.2 V, State 1 = 2.5 V to 5 V. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.