MASWSS0169SMB

MASWSS0169 GaAs High Isolation Switch DC - 3.0 GHz Features • • • • • • • • • Low Power Consumption: < 20 µA @ +3 V High Isolation: 50 dB Typical @ 2 GHz Low Insertion Loss: 0.7 dB @ 2 GHz Positive 2.5 to 5 V Control Lead-Free MSOP-10 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SW-439 Rev. V2 Functional Schematic 4 C = 39 pF C = 39 pF Pin 10 Description M/A-COM’s MASWSS0169 is a GaAs MMIC SPDT switch in a lead-free MSOP-10 surface mount plastic package. This part is ideal for high isolation, broadband switching requirements. Typical applications include synthesizer switching, transmit/receive switching, switch matrices and filter banks in systems such as radio and cellular equipment, PCM, GPS, and fiber optic modules. The MASWSS0169 is fabricated as a monolithic GaAs MMIC using a 0.5 micron PHEMT process. The process features full passivation. Pin 1 C = 39 pF 4. For improved performance at frequencies below 500 MHz, use larger value capacitors. Pin Configuration Pin No. 1 Function Control 1 Ground RF Input Ground Control 2 Pin No. 6 7 8 9 10 Function RF Port 2 Ground Ground Ground RF Port 1 Ordering Information 1 Part Number MASWSS0169 MASWSS0169TR-3000 MASWSS0169SMB 2 Package Bulk Packaging 3000 piece reel Sample Board 3 4 5 1. Reference Application Note M513 for reel size information. Truth Table 5,6 Control V1 0 1 Absolute Maximum Ratings 2,3 Parameter Input Power Operating Voltage Operating Temperature Storage Temperature Control V2 1 0 RFC - RF1 Off On RFC - RF2 On Off Absolute Maximum +30 dBm +8.5 Volts -40°C to +85°C -65°C to +150°C 5. External DC blocking capacitors are required on all RF ports. 6. “0” = 0 + 0.2 Vdc, “1” = +2.5 to +5 Vdc 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. 1 changes to the product(s) or information contained herein without notice. MASWSS0169 GaAs High Isolation Switch DC - 3.0 GHz Electrical Specifications: TA = 25°C, VC = 0 / 3 V, Z0 = 50Ω Parameter Insertion Loss Rev. V2 Test Conditions 500 MHz - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 500 MHz - 2.0 GHz 2.0 - 3.0 GHz 0.25 - 3.0 GHz 500 MHz - 2.0 GHz, VC = 3 V 500 MHz - 2.0 GHz, VC = 5 V 2 Tone, 900 MHz, 5 MHz Spacing, VC = 3 V 2 Tone, 900 MHz, 5 MHz Spacing, VC = 3 V 50% Control to 90% RF, 50% Control to 10% RF 10% to 90% RF, 90% to 10% RF In-band |VC| = 3.0 V Units dB dB dB dB dB Ratio dBm dBm dBm dBm nS nS mV µA Min — — — 45 — — — — — — — — — — Typ 0.55 0.65 0.80 47 33 1.2:1 20 28 85 50 20 10 15 5 Max 0.65 — — — — — — — — — — — — 20 Isolation VSWR P1dB P1dB IP2 IP3 Ton, Toff Trise, Tfall Transients Control Current Lead-Free MSOP-10† † Reference Application Note M538 for lead-free solder reflow recommendations. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0169 GaAs High Isolation Switch DC - 3.0 GHz Typical Performance Curves Insertion Loss 1.0 Rev. V2 Isolation 70 0.8 60 0.6 50 0.4 +85°C +25°C -40°C 40 +85°C +25°C -40°C 0.2 30 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) VSWR 2.0 +85°C +25°C 1.8 -40°C 1.6 1.4 1.2 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.