MASWSS0169TR-3000

MASWSS0169 GaAs High Isolation Switch DC - 3.0 GHz Rev. V3 Functional Schematic 4 Features         Low Power Consumption: < 20 µA @ +3 V High Isolation: 50 dB Typical @ 2 GHz Low Insertion Loss: 0.7 dB @ 2 GHz Positive 2.5 to 5 V Control Lead-Free MSOP-10 Package Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SW-439 C = 39 pF C = 39 pF Pin 10 Description The MASWSS0169 is a GaAs MMIC SPDT switch in a lead-free MSOP-10 surface mount plastic package. This part is ideal for high isolation, broadband switching requirements. Typical applications include synthesizer switching, transmit/ receive switching, switch matrices and filter banks in systems such as radio and cellular equipment, PCM, GPS, and fiber optic modules. The MASWSS0169 is fabricated as a monolithic GaAs MMIC using a 0.5 micron pHEMT process. The process features full passivation. Ordering Information Pin 1 C = 39 pF 4. For improved performance at frequencies below 500 MHz, use larger value capacitors. Pin Configuration Pin No. Function Pin No. Function 1 Control 1 6 RF Port 2 2 Ground 7 Ground 3 RF Input 8 Ground 4 Ground 9 Ground 5 Control 2 10 RF Port 1 1 Part Number Package MASWSS0169 Bulk Packaging MASWSS0169TR-3000 3000 piece reel MASWSS0169SMB Sample Board Absolute Maximum Ratings 5,6 1. Reference Application Note M513 for reel size information. Truth Table 2,3 Parameter Absolute Maximum Input Power +30 dBm Operating Voltage +8.5 Volts Control V1 Control V2 RFC - RF1 RFC - RF2 Operating Temperature -40°C to +85°C 0 1 Off On Storage Temperature -65°C to +150°C 1 0 On Off 2. External DC blocking capacitors are required on all RF ports. 3. “0” = 0 + 0.2 Vdc, “1” = +2.5 to +5 Vdc 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM Technology does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0169 GaAs High Isolation Switch DC - 3.0 GHz Rev. V3 Electrical Specifications: TA = 25°C, VC = 0 / 3 V, Z0 = 50Ω Parameter Test Conditions Units Min Typ Max Insertion Loss 500 MHz - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz dB dB dB — — — 0.55 0.65 0.80 0.65 — — Isolation 500 MHz - 2.0 GHz 2.0 - 3.0 GHz dB dB 45 — 47 33 — — VSWR 0.25 - 3.0 GHz Ratio — 1.2:1 — P1dB 500 MHz - 2.0 GHz, VC = 3 V dBm — 20 — P1dB 500 MHz - 2.0 GHz, VC = 5 V dBm — 28 — IP2 2 Tone, 900 MHz, 5 MHz Spacing, VC = 3 V dBm — 85 — IP3 2 Tone, 900 MHz, 5 MHz Spacing, VC = 3 V dBm — 50 — Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF ns — 20 — Trise, Tfall 10% to 90% RF, 90% to 10% RF ns — 10 — Transients In-band mV — 15 — Control Current |VC| = 3.0 V µA — 5 20 Lead-Free MSOP-10† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0169 GaAs High Isolation Switch DC - 3.0 GHz Rev. V3 Typical Performance Curves Isolation Insertion Loss 1.0 70 0.8 60 0.6 50 40 0.4 +85°C +25°C -40°C 30 0.2 0.0 0.0 +85°C +25°C -40°C 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) VSWR 2.0 Handling Procedures +85°C +25°C -40°C 1.8 Please observe the following precautions to avoid damage: Static Sensitivity 1.6 Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1.4 1.2 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0169 GaAs High Isolation Switch DC - 3.0 GHz Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support