MASWSS0176TR-3000

MASWSS0176 GaAs SPDT Switch 0.05 - 3 GHz Rev. V1 Features         Functional Schematic Low Insertion Loss: 0.35 dB @ 2.4 GHz Moderate Isolation: 21 dB @ 2.4 GHz Low Current Consumption: 5 µA @ 2.5 V Lead-Free SOT-26 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MASWSS0005 C=39pF V1 RFC V2 RF1 GND RF2 Description M/A-COM’s MASWSS0176 is a GaAs PHEMT MMIC single pole, double throw (SPDT) switch in a low cost, lead-free SOT-26 surface mount plastic package. The MASWSS0176 is ideally suited for applications where small size and low cost are required. Typical applications are dual band systems which require switching between small signal components such as filter banks, single-band LNAs, converters, etc. This part can be used for low power, low loss requirements in all systems operating up to 3 GHz, including PCS, GSM, DCS, Satellite Radio, Blue Tooth, and other receive chain applications. PIN 1 C=39pF C=39pF Pin Configuration Pin No. The MASWSS0176 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Function Description 1 RF1 RF Port 1 2 GND Ground 3 RF2 RF Port 2 4 V2 Control 2 5 RFC RF Input 6 V1 Control 1 Absolute Maximum Ratings 2,3 Ordering Information 1 Part Number Package Parameter Absolute Maximum MASWSS0176 Bulk Packaging Input Power @ 2.5 V Control +26 dBm MASWSS0176TR-3000 3000 piece reel Operating Voltage +8.5 V MASWSS0176SMB Sample Board Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0176 GaAs SPDT Switch 0.05 - 3 GHz Rev. V1 Electrical Specifications: TA = 25°C, Vc = 0 V / +2.5 V, Z0 = 50 Ohms 4,5 Parameter Test Conditions Units Min Typ Max Insertion Loss 0.05 - 1.0 GHz 1.0 - 3.0 GHz dB dB — — 0.3 0.35 0.4 0.55 Isolation 0.05 - 1.0 GHz 1.0 - 3.0 GHz dB dB 20 — 24 21 — — Return Loss 0.05 - 3.0 GHz dB — 20 — IP2 Two Tone +5 dBm, 5 MHz Spacing dBm — 62 — IP3 Two Tone +5 dBm, 5 MHz Spacing dBm — 45 — P1dB — dBm — 21 — Trise, Tfall 10% to 90% RF and 90% to 10% RF nS — 35 — Ton, Toff 50% Vc to 10% RF, 50% Vc to 90% RF nS — 40 — Transients In-Band mV — 10 — Control Current Vc = 2.5 V µA — 5 20 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz. Lead-Free SOT-26† Truth Table 6 Control V1 Control V2 RFC-RF1 RFC-RF2 0 1 On Off 1 0 Off On 6. 0 = 0 V to 0.2 V, 1 = +2.5 V to 5 V Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. † Reference Application Note M538 for lead-free solder reflow recommendations. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0176 GaAs SPDT Switch 0.05 - 3 GHz Rev. V1 Typical Performance Curves Insertion Loss Isolation 0.5 30 0.4 28 0.3 26 0.2 24 0.1 22 0.0 0.5 1.0 1.5 2.0 2.5 3.0 20 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Return Loss 0 10 20 30 40 50 60 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASWSS0176 GaAs SPDT Switch 0.05 - 3 GHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. 4 MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support