MASWSS0176SMB

MASWSS0176 GaAs SPDT Switch 0.05 - 3 GHz Features • • • • • • • • Low Insertion Loss: 0.35 dB @ 2.4 GHz Moderate Isolation: 21 dB @ 2.4 GHz Low Current Consumption: 5 µA @ 2.5 V Lead-Free SOT-26 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MASWSS0005 Rev. V1 Functional Schematic C=39pF V1 RFC V2 Description M/A-COM’s MASWSS0176 is a GaAs PHEMT MMIC single pole, double throw (SPDT) switch in a low cost, lead-free SOT-26 surface mount plastic package. The MASWSS0176 is ideally suited for applications where small size and low cost are required. Typical applications are dual band systems which require switching between small signal components such as filter banks, single-band LNAs, converters, etc. This part can be used for low power, low loss requirements in all systems operating up to 3 GHz, including PCS, GSM, DCS, Satellite Radio, Blue Tooth, and other receive chain applications. The MASWSS0176 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. RF1 GND RF2 PIN 1 C=39pF C=39pF Pin Configuration Pin No. 1 2 3 4 5 6 Function RF1 GND RF2 V2 RFC V1 Description RF Port 1 Ground RF Port 2 Control 2 RF Input Control 1 Ordering Information 1 Part Number MASWSS0176 MASWSS0176TR-3000 MASWSS0176SMB Absolute Maximum Ratings 2,3 Package Bulk Packaging 3000 piece reel Sample Board Parameter Input Power @ 2.5 V Control Operating Voltage Operating Temperature Storage Temperature Absolute Maximum +26 dBm +8.5 V -40°C to +85°C -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0176 GaAs SPDT Switch 0.05 - 3 GHz Electrical Specifications: TA = 25°C, Vc = 0 V / +2.5 V, Z0 = 50 Ohms 4,5 Parameter Insertion Loss Isolation Return Loss IP2 IP3 P1dB Trise, Tfall Ton, Toff Transients Control Current Rev. V1 Test Conditions 0.05 - 1.0 GHz 1.0 - 3.0 GHz 0.05 - 1.0 GHz 1.0 - 3.0 GHz 0.05 - 3.0 GHz Two Tone +5 dBm, 5 MHz Spacing Two Tone +5 dBm, 5 MHz Spacing — 10% to 90% RF and 90% to 10% RF 50% Vc to 10% RF, 50% Vc to 90% RF In-Band ⏐Vc⏐ = 2.5 V Units dB dB dB dB dB dBm dBm dBm nS nS mV µA Min — — 20 — — — — — — — — — Typ 0.3 0.35 24 21 20 62 45 21 35 40 10 5 Max 0.4 0.55 — — — — — — — — — 20 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz. Truth Table 6 Control V1 0 1 Lead-Free SOT-26† Control V2 1 0 RFC-RF1 On Off RFC-RF2 Off On 6. 0 = 0 V to 0.2 V, 1 = +2.5 V to 5 V Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. † Reference Application Note M538 for lead-free solder reflow recommendations. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0176 GaAs SPDT Switch 0.05 - 3 GHz Typical Performance Curves Insertion Loss 0.5 Rev. V1 Isolation 30 0.4 28 0.3 26 0.2 24 0.1 22 0.0 0.5 1.0 1.5 2.0 2.5 3.0 20 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Return Loss 0 10 20 30 40 50 60 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.