MASWSS0190TR-3000

MASWSS0190 GaAs Broadband DPDT Diversity Switch 2.0 - 6.0 GHz Features • 802.11a + b/g Dual Band Applications • Broadband Performance: 2.0 - 6.0 GHz • Low Insertion Loss: 0.75 dB @ 2.4 GHz 0.9 dB @ 4.9 to 6.0 GHz • High Isolation: 43 dB @ 2.4 GHz 31 dB @ 4.9 to 6.0 GHz • Fast Switching Speed: 0.5 µm GaAs PHEMT • Lead-Free 2 mm 8-Lead UTDFN Package • Electrolytic Gold Plate over Nickel Plate • Halogen-Free “Green” Mold Compound • RoHS* Compliant and 260°C Reflow Compatible Rev. V1 Functional Schematic Description M/A-COM’s MASWSS0190 is a broadband GaAs PHEMT MMIC diversity switch available in a low cost, lead-free, ultra thin 2 mm 8-lead UTDFN package. The MASWSS0190 is ideally suited for applications where very small size and low cost are required. Typical applications are for WLAN IEEE 802.11a and 802.11b/g systems that employ two antennas for transmit and receive diversity. Other applications include cordless phones and base stations. Designed for high power, this DPDT switch maintains high linearity up to 6.0 GHz. The MASWSS0190 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Pin Configuration Pin No. 1 2 3 4 5 6 7 Pin Name Rx GND GND Tx V C1 ANT1 ANT2 V C2 Paddle 1 Description Receive Port Ground Ground Transmit Port Control 1 Antenna Port 1 Antenna Port 2 Control 2 RF and DC Ground Ordering Information Part Number MASWSS0190TR-3000 MASWSS0190SMB 8 Package 7 inch, 3000 piece reel Sample Test Board 9 1. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0190 GaAs Broadband DPDT Diversity Switch 2.0 - 6.0 GHz Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, 8 pF Capacitor2, Z0 = 50 Ω Parameter Insertion Loss Isolation (on/off or off/on) Isolation (on/on or off/off) Return Loss (on/off or off/on) Rev. V1 Test Conditions 2.4 GHz 4.9 - 6 GHz, with 3 pF DC blocking capacitors 2.4 GHz 4.9 - 6 GHz, with 3 pF DC blocking capacitors 2.4 GHz 4.9 - 6 GHz, with 3 pF DC blocking capacitors 2.4 GHz 4.9 - 6 GHz, with 3 pF DC blocking capacitors Two Tone, 15 dBm/Tone, 5 MHz Spacing 2.4 GHz 5.3 GHz 5.8 GHz Two Tone, 15 dBm/Tone, 5 MHz Spacing 2.4 GHz 5.3 GHz 5.8 GHz 2.4 GHz 5.3 GHz 5.8 GHz PIN = 20 dBm 2.4 GHz 5.8 GHz PIN = 20 dBm 2.4 GHz 5.8 GHz 10% to 90% RF 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF — |VC| = 3 V Units dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm nS nS nS mV µA Min. — — 39 27 5 9 19 17 — — — — — — — — — — — — — — — — — — Typ. 0.75 .9 43 31 7 11 22 20 93 86 84 52 50 50 33 31 31 -75 -77 -69 -86 35 60 90 6 3 Max. 1.25 1.4 — — — — — — — — — — — — — — — — — — — — — — — 10 IP2 IP3 Input P-1dB 2nd Harmonic 3rd Harmonic Trise, Tfall Ton, Toff Transients Control Current 2. For positive voltage control, external DC blocking capacitors are required on all RF ports. Performance values are valid using 8 pF DC blocking capacitors, except where noted. All scattering parameters can be optimized by varying the DC blocking capacitor value, e.g. 8 pF for 2.4 GHz, 3 pF for 4.9 GHz - 6 GHz. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0190 GaAs Broadband DPDT Diversity Switch 2.0 - 6.0 GHz Evaluation Board for Lead-Free 2 mm 8-lead UTDFN Package Application Schematic C1,C2,C3,C4 = 8 pF C5,C6 = 100 pF Rev. V1 Absolute Maximum Ratings 3,4 Parameter Input Power @ 3 V Control Input Power @ 5 V Control Voltage Operating Temperature Storage Temperature Absolute Maximum +31 dBm +34 dBm ± 8.5 volts -40 C to +85 C -65°C to +150°C ° ° Truth Table 5,6 Control VC1 1 0 1 0 Control VC2 0 1 1 0 ANT 1 ANT 1 ANT 2 ANT 2 - Rx - Tx - Tx - Rx On Off Off Off Off On Off Off On Off Off Off Off On Off Off 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: 5. 1 = +2.9 V to +5 V, 0 = 0 V + 0.2 V. 6. Differential voltage, V (state 1) - V (state 0), must be 2.7 V minimum and must not exceed 8.5 V. Qualification Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Qualified to M/A-COM specification REL-201, Process Flow –2. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0190 GaAs Broadband DPDT Diversity Switch 2.0 - 6.0 GHz Typical Performance Curves (on/off or off/on states) Insertion Loss 2.0 3 pF 8 pF Rev. V1 Isolation 60 3 pF 8 pF 50 1.5 40 1.0 30 0.5 2 3 4 5 6 20 2 3 4 5 6 Frequency (GHz) Frequency (GHz) Return Loss -10 -20 -30 -40 Input Return Loss 3 pF Input Return Loss 8 pF Output Return Loss 3 pF Output Return Loss 8 pF -50 2 3 4 5 6 Frequency (GHz) Lead-Free 2 mm 8-Lead UTDFN† 4 † Reference Application Note M538 for lead-free solder reflow recommendations. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.