10VSK3

Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 High Performance K Series RFI Line Filters for SMPS Emission Control SK Series UL Recognized CSA Certified VDE Approved SK1 SK3 SK7/7M 1 RFI Power Line Filters SK Series • Designed to reduce conducted noise to acceptable limits for equipment that must comply with FCC / EN specifications • Utilizes significantly higher element values than the general purpose K Series which makes them better suited for equipment with Line to Ground and Line to Line conducted emissions including those with switching power supplies • ESK6C and VSK6C incorporate separate ground circuit inductor to isolate the equipment chassis from power line ground at RF frequencies Specifications Maximum leakage current each Line to Ground: 3, 6 & 10A VSK Models ESK Models @120 VAC 60 Hz: .4 mA .21 mA @250 VAC 50 Hz: .7 mA .36 mA 20, 30 & 40A @120 VAC 60 Hz: .75 mA .3 mA @250 VAC 50 Hz: 1.25 mA .5 mA Hipot rating (one minute): Line to Ground: Line to Line: Rated Voltage (max): Operating Frequency: 2250 VDC 1450 VDC 250 VAC 50/60 Hz 3 to 40A Ordering Information 10 E SK 7 M Suffix M – Metric inserts (style 7 only) Omit for standard or none C – Ground choke (30ESK/VSK only) Input / Output Style 1 – .250 [6.3] spade terminals 3 – Wire leads 6 – Threaded bolt 7 – IEC inlet* (line side) .250 [6.3] spade terminals (load side) Rated Current: Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Available Part Numbers 3VSK1 3VSK3 3VSK7 3VSK7M 6VSK1 6VSK3 6VSK7 6VSK7M 10VSK1 10VSK3 10VSK7 10VSK7M 3ESK1 3ESK3 3ESK7 3ESK7M 6ESK1 6ESK3 6ESK7 6ESK7M 10ESK1 10ESK3 10ESK7 10ESK7M 20ESK6 20VSK6 30ESK6 30ESK6C 30VSK6 30VSK6C 40VSK6 SK Series Leakage current designation E – Low leakage (