CDEUW400030A4-S-L

Corcom Facility EMI Filters Product Guide CDEUW Series (Capacitive Input) Catalog: 1654986 Issue Date: 11.2009 CDEUW Series Filter Cabinet • Modified NEMA I, constructed of not less than #14 gauge CRS with galvanized bulkhead • Blue epoxy finish to all non-conductive surfaces • R.F. Radiation of the shielded (load) compartment greater than 100 dB from 14 kHz to 10 GHz • Front cover access, dual cover design • Filter inserts pre-wired to standoffs and lugs • Lifting hooks and mounting tabs • Legs for floor mount available (see page 24) 6P16 † Individual Filters • Sealed components with welded and/or soldered seams • Constructed of not less than #16 gauge steel with corrosion resistant plating • Bleeder resistor to eliminate shock hazard provided • Surge arrestors provided upon request‡ Electrical Characteristics Voltage Drop: Less than 1% @ unity power factor Overload: 140% of rated current for 15 minutes Harmonic Distortion: Less than 2% @ full rated current Dielectric Withstanding Voltage: Per MIL-PRF-15733 and UL1283 D.C. Insulation Resistance: Per MIL-STD-202, Method 302 Terminal Strength: Per MIL-STD-202, Method 211, Condition E Temperature Rise: Per MIL-PRF-15733 and UL1283 Shown with optional legs R.F. Radiation: 100 dB minimum shielding effectiveness How to Order: CDEUW 4 00225 A6 -S -L Legs Surge Arrestors (optional) Voltage/Frequency A6 - 120/208V, 60Hz B6 - 277/480V, 60Hz A4 - 120/208V, 400Hz 1 Insertion Loss: 100 dB from 14 kHz - 10 GHz per MIL-STD-220A, under standard load condition Current Rating 2 Applicable Publications: MIL-PRF-15733 — Filters, radio interference MIL-STD-202 — Test methods for Components MIL-STD-220A — Test method of Insertion Loss MIL-STD-285 — Test method for Shielding Effectiveness NFPA 70-1987 — National Electric Code 486A - 1983 — Wire Connectors and Lug UL1283 — Underwriter Laboratories Examples: CDEUW400225A6-S-L = # of Filters Series 4, 225A CDEUW, 120/280V filters in cabinet with surge arrestors and legs CDEUW300030B6 = 3, 30A CDEUW, 277/480V filters in cabinet Note 1: Surge Arrestor for A6/A4* Models: V251BA60 Surge Arrestor for B6 Models: V481BA60 Current configuration listed as 5 digits with leading zeros Note 2: ‡ Not intended for HEMP applications. Refer to the CDEUL(225A) page 14 for HEMP applications.. † 60 Hz Models Only 8 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 www.tycoelectronics.com www.corcom.com Corcom Facility EMI Filters Product Guide CDEUW Series (Capacitive Input) (continued) Mounting Brackets E A C Catalog: 1654986 Issue Date: 11.2009 Removable Cover RF Gasket 2 Removable Individual Phase Filters Corcom Facility EMI Filters — NEMA Cabinet Style D B Removable Cover Area for Conduit Penetration Current (Amps) 2 x 10 3 x 10 4 x 10 2 x 30 3 x 30 4 x 30 2 x 60 & 100 3 x 60 & 100 4 x 60 & 100 Dimensions B C D 30.0 6.0 22.0 762.0 152.4 558.8 30.0 6.0 22.0 762.0 152.4 558.8 30.0 6.0 22.0 762.0 152.4 558.8 38.0 8.0 26.0 965.2 203.2 660.4 38.0 8.0 26.0 965.2 203.2 660.4 38.0 8.0 26.0 965.2 203.2 660.4 44.0 10.0 32.0 1117.6 254.0 812.8 44.0 10.0 32.0 1117.6 254.0 812.8 44.0 10.0 32.0 1117.6 254.0 812.8 Weight E (Pounds/KG) 16.0 95 406.4 43.1 22.0 100 558.8 45.4 28.0 120 711.2 54.4 18.0 170 457.2 77.1 25.0 240 635.0 108.9 32.0 300 812.8 136.1 18.0 240 457.2 108.9 25.0 310 635.0 140.6 32.0 400 812.8 181.4 Current (Amps) 2 x 150 3 x 150 4 x 150 2 x 225 3 x 225 4 x 225 For optional legs, refer to page 24 A 14.0 355.6 20.0 508.0 26.0 660.4 16.0 406.4 23.0 584.2 30.0 762.0 16.0 406.4 23.0 584.2 30.0 762.0 A 16.0 406.4 23.0 584.2 30.0 762.0 16.0 406.4 23.0 584.2 30.0 762.0 Dimensions B C D 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.5 1066.8 Weight E (Pounds/KG) 18.0 320 457.2 145.1 25.0 430 635.0 195.0 32.0 650 812.8 294.8 18.0 380 457.2 172.4 25.0 520 635.0 235.9 32.0 700 812.8 317.5 *400Hz filters available upon request. Will require external power factor correction coil. Please contact Tyco Electronics Application Engineering 847-573-6517. Max. Operating Voltage A6: 120/208V, 60 Hz B6: 277/480V, 60 Hz A4*: 120/208V, 400 Hz Recommended torque for fasteners on removable cover: 25 in. lb. ± 3 in. lb. Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 9 www.tycoelectronics.com www.corcom.com