EV200HJABA

KILOVAC EV200 Series Contactor With 1 Form X Contacts Rated 500+ Amps, 12-900VDC Product Facts I Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating (500+A carry, 2000A interrupt at 320VDC). I Built-in coil economizer – only 1.7W hold power @ 12VDC and it limits back EMF to 0V. Models requiring extenal economizer also available. I Optional auxiliary contact for easy monitoring of power contact position. I Hermetically sealed – intrinsically safe, operates in explosive/harsh environments with no oxidation or contamination of coils or contacts, including long periods of nonoperation. I Versatile coil/power connections. I CE marked for EC applications. I AIAG QS9000 designed, built and approved EV200 Series Contactor (CZONKA® Relay, Type III) File E208033 Typical EV200 applications include battery switching and back-up, DC voltage power control, circuit protection and safety. For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Performance Data Parameter Units Value for EV200 Series Contact Arrangement, power contacts 1 Form X (SPST-NO-DM) Rated Operating Voltage VDC 12 - 900 Continuous (Carry) Current, Typical A 500 @ 85°C, 400 mcm conductors Consult Factory for required conductors for higher (500+ A) currents Make/Break Current at Various Voltages 1/ A See next page Break Current at 320VDC 1/ A 2,000, 1 cycle 3/ Contact Resistance, Typ. (@200A) mohms 0.2 Load Life Cycles See next page Mechanical Life Cycles 1 million Contact Arrangement, auxiliary contacts 1 Form A (SPST-NO) Aux. Contact Current, Max. A 2A @ 30VDC / 3A @ 125VAC Aux. Contact Current, Min. mA 100mA @ 8V Aux. Contact Resistance, Max. ohms 0.417 @ 30VDC / .150 @ 125VAC Operate Time @ 25°C Close (includes bounce), Typ. ms 15 Bounce (after close only), Max. ms 7 Release (includes arcing), Max @ 2000A ms 12 Dielectric Withstanding Voltage Vrms 2,200 @ sea level (leakage