MASWSS0093TR

RoHS Compliant GaAs Broadband SPDT Switch DC - 6.0 GHz Features • • • • • • • • • • UNII, Hiperlan, and 802.11a+b/g Applications Broadband Performance: DC-6 GHz Low Insertion Loss: 0.9 dB at 6 GHz High Isolation: 28 dB Typical Fast Switching Speed: 0.5 µm GaAs PHEMT High Power: 36 dBm P1dB Lead-Free 3 mm 12-lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible MASWSS0093 V2 Functional Schematic GND RFC GND VC1 VC2 RF1 RF2 GND GND GND GND GND Description M/A-COM’s MASWSS0093 is a broadband GaAs PHEMT MMIC SPDT switch in a low cost, lead-free 3 mm 12-lead PQFN package. The MASWSS0093 is ideally suited for applications where very small size and low cost are required. The MASWSS0093, with its small size and low height, is ideal for 802.11a and 802.11b/g PC card and access point applications. The MASWSS0093 delivers high isolation, low insertion loss and high linearity up to 6 GHz. The MASWSS0093 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Pin Configuration PIN No. 1 2 3 4 5 6 7 8 9 10 11 12 13 PIN Name VC1 RF1 GND GND GND GND GND RF2 VC2 GND RFC GND Paddle 1 Description Control 1 RF Port 1 Ground Ground Ground Ground Ground RF Port 2 Control 2 Ground RF Input Ground RF and DC Ground Ordering Information Part Number MASWSS0093 MASWSS0093TR MASWSS0093SMB 1. The exposed pad centered on the package bottom must be connected to RF and DC ground. Package Bulk Packaging 1000 piece reel Sample Test Board (Includes 5 Samples) Absolute Maximum Ratings 2,3 Parameter Input Power @ 3 V Control Input Power @ 5 V Control Operating Voltage Operating Temperature Storage Temperature Absolute Maximum +37 dBm +39 dBm +8.5 volts -40°C to +85°C -65°C to +150°C Note: Reference Application Note M513 for reel size information. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband SPDT Switch DC - 6.0 GHz Electrical Specifications4: TA = 25°C, Z0 = 50Ω, Vc = 0 V/3 V, Pin = 0 dBm Parameter Insertion Loss MASWSS0093 V2 Test Conditions 2.4 GHz 5.3 GHz 5.8 GHz 2.4 GHz 5.3 GHz 5.8 GHz DC - 6 GHz Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, Vc = 3.0 V 5.8 GHz, Vc = 3.0 V 2.4 GHz, Vc = 5.0 V 5.8 GHz, Vc = 5.0 V Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, Vc = 3.0 V 5.8 GHz, Vc = 3.0 V 2.4 GHz, Vc = 5.0 V 5.8 GHz, Vc = 5.0 V 2.4 GHz 5.3 GHz 5.8 GHz 2.4 GHz, Pin = +20 dBm 5.8 GHz, Pin = +20 dBm 2.4 GHz, Pin = +20 dBm 5.8 GHz, Pin = +20 dBm 10% to 90% RF and 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF — |Vc| = 3 V Units dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm nS nS mV µA Min. — — — 24 23 21 — — — — — — — — — — — — — — — — — — — — Typ. 0.70 0.85 0.85 29 28 26 20 98 81 107 87 57 53 57 54 40 36 37 -72 -69 -85 -75 55 80 14 15 Max. 1.05 1.2 1.2 — — — — — — — — — — — — — — — — — — — — — — 25 Isolation Return Loss IP2 IIP3 Input P-1dB 2nd Harmonic 3rd Harmonic T-rise, T-fall Ton, Toff Transients Control Current Truth Table 4,5,6 Control V1 1 0 Handling Procedures RFC– RF1 RFC—RF2 On Off Off On Control V2 0 1 Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Differential voltage, V(state 1) - V(state 0), must be +2.7 V minimum and must not exceed +5 V. 6. 0 = 0 ± 0.2 V, 1 = +2.9 V to +5 V. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband SPDT Switch DC - 6.0 GHz Typical Performance Curves Insertion Loss 1.4 MASWSS0093 V2 Isolation 40 +25°C +85°C -30°C 1.2 +25°C +85°C -30°C 35 1.0 30 0.8 25 0.6 0.4 1 2 3 4 5 6 20 1 2 3 4 5 6 Frequency (GHz) Frequency (GHz) Return Loss 0 -5 -10 -15 -20 -25 -30 -35 -40 1 2 3 4 5 6 +25°C +85°C -30°C Application Schematic C1, C2, C3 = 8 pF C3 GND RFC GND VC1 RF1 C1 GND VC2 RF2 C2 GND Frequency (GHz) Lead-Free 3 mm 12-lead PQFN† GND GND GND † Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.