SSRF-240D25

SSRF Series Solid State Relays SSRF series 25A SIP Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application. Features • • • • • • • Heatsink is integrated into package. 25A rms inverse-parallel connected SCR output. Choice of 240 or 480VAC nominal output. 3-15 / 4-15VDC input control. Zero voltage and random voltage turn-on versions. 4,000V rms optical isolation. Pinout compatible with OAC or OACM series output modules. Engineering Data Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4,000V rms input-to-output-to-ground. Insulation Resistance: 109 Ohms, minimum, at 500VDC. Capacitance: 8.0 pf maximum (input to output). Temperature Range: Storage: –30°C to +125°C Operating: –30°C to + 80°C Case Material: Thermally conductive epoxy encapsulation. Case and Mounting: Refer to outline dimension drawing. Termination: Printed circuit terminals. Refer to outline dimension drawing. Approximate Weight: 0.85 oz. (25.0g). Ordering Information Sample Part Number 1. Basic Series: SSRF = SIP Solid State Relay with Integral Heatsink 2. Line Voltage: 240 = 12 - 280 VAC 480 = 48 - 660 VAC 3. Input Type & Voltage: D = 3 - 15VDC (240V output types) or 4 - 15VDC (480V output types) 4. Maximum Switching Rating/Output: 25 = 25.0A rms (with forced air cooling) 5. Options: Blank = Zero voltage turn-on R = Random voltage turn-on SSRF -240 D 25 R Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRF-240D25 SSRF-240D25R SSRF-480D25 SSRF-480D25R Input Specifications Parameter Control Voltage Range V IN Must Operate Voltage VIN(OP) (Min.) Must Release Voltage V IN(REL) (Min.) Input Current @ 5 VDC (Typ.) Input Impedance (Nom.) Conditions @ 25°C @ 25°C @ 25°C @ 25°C @ 25°C Units VDC VDC VDC mA DC ohms 240V Output, Zero or Random V Turn-on 3-15 3.0 1.0 15 300 480V Output Units, Zero or Random V Turn-on 4-15 4.0 1.0 15 240 Issued 4-09 www.tycoelectronics.com 1 Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208 1 SSRF Series Solid State Relays Output Specifications (@ 25° C, unless otherwise specified) Parameter Load Voltage Range VL Repetitive Blocking Voltage (Min.) Load Current Range I L * Single Cycle Surge Current (Min.) Leakage Current (Off-State) (Max.) On-State Voltage Drop (Max.) Static dv/dt (Off-State) (Min.) Turn-On Time (Max.) Turn-Off Time (Max.) I 2 t Rating Load Power Factor Rating (Min.) *See Thermal Derating Curves. f = 60 Hz. VL = 280Vrms I L = Max. V L = Max. f = 60 Hz. f = 60 Hz. t = 8.3 ms I L = Max. Max. Heatsink Temp. 85°C Conditions f = 47-63 Hz. Units V rms V peak A rms A peak mA rms V peak V/µs ms ms A2 Sec. 240V Nom. Output Units 12-280 ±600 .06-25.0 (Forced Air Cooling) .06-10.0 (Convection Cooling) 250 0.1 1.6 500 8.3 for Zero Voltage Turn-On Models 0.1 for Random Voltage Turn-On Models 8.3 260 0.5 480V Nom. Output Units 48-660 ±1200 .06-25.0 (Forced Air Cooling) .06-10.0 (Convection Cooling) 250 0.1 1.6 500 8.3 for Zero Voltage Turn-On Models 0.1 for Random Voltage Turn-On Models 8.3 260 0.5 Electrical Characteristics (Thermal Derating Curves) Forced Air Cooling 25 Outline Dimensions 1.6 TYP. (38.1) Load Current (Amps) 20 15 10 5 0 0 20 40 60 80 100 120 140 .050 (1.3) 1.35 MAX. (34.3) .300 (7.6) TYP. 43 –+ 2 1 .72 (18.3) TYP. .900 (22.8) 1.70 (43.1) Heatsink Temperature(°C) Convection Cooling 10 .200 (5.1) .700 (17.8) 1.100 (27.9) Load Current (Amps) 8 6 4 2 0 0 10 20 30 40 50 60 70 80 PIN ASSIGNMENTS: PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: + DC INPUT PIN 4: – DC INPUT .040 (1.0) DIA. 4 PLACES Ambient Temperature (°C) Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this document, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications. © 2009 by Tyco Electronics Corporation. All Rights Reserved. TE logo and Tyco Electronics are trademarks. Catalog 8-1773454-3 Issued 4-09 Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208 2 www.tycoelectronics.com