SMBC-202-S-02-T-H-LF

8 7 .047 [1.20] 6 4 5 .034 [0.86] SINGLE (S) ROW .079[2.00] F 2 3 Recommended P.C. Board Layout SCALE 4:1 Pin 1 1 DOUBLE ROW SINGLE (M) ROW APPLICATION .294 [7.46] F .082[2.08] .079[2.00] .040[1.02] DOUBLE ROW .196 [4.97] .082[2.08] E .079[2.00] SMBC-2 XX - X - 02 - XX - V - XXX - X - XXX - X - XX - LF (A) (B) (C ) (D) (E) (F) (G) (H) (I) (J) (K) Pin 1 Pin 1 .082[2.08] .196 [4.97] A. Pins Per Row - 1 through 40 B. Row Specification - S= Single Row - D= Double Row C. Mounting Style - 02= Surface Mount D. Plating Options - See Plating Options below E. V= Vertical F. Polarized Position - Leave blank if not needed - If required, specify empty pin position - e.g. 012 for Pin 12 G. Footprint ( Option only for Single Row) - S= pin 1 right - M= pin 1 left H. Packing Information - TR= Tape and Reel - TB= Tube - If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic I. Pad - P= Plastic - M= Metal - K= Kapton - O= No Pad J. Alignment Pin (Option only available for Double Row) - Leave blank if not needed - AP= With K. Lead Free .040[1.02] SINGLE (S) ROW SINGLE (M) ROW Point of Contact .059[1.50] D .079[2.00]X No. of Positions .009[0.25] .095 [2.41] 01 40 G T GT H F FT C SINGLE (S) ROW .079[2.00] .177 [4.50] .019[0.50] x.009[0.22] .165[4.19] 40 B SINGLE (M) ROW 80 Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail 01 UNLESS OTHERWISE SPECIFIED: .039[1.00] .044 [1.10] .079[2.00]X No. of Spaces .007[0.20] PROPRIETARY AND CONFIDENTIAL .240[6.09] DOUBLE ROW 8 7 6 5 B Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. .079 .158 [2.00] [4.00] A C Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” (1.27) Ni 02 79 D Specifications: Insertion Force- Single Contact only- H Plating: 3.7oz. [1.03N] avg with .0197 [0.50mm] sq. pin Withdrawal Force- Single Contact only- H Plating: 2.2oz. [0.61N] avg with .0197 [0.50mm] sq. pin Current Rating: 2.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 500V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. .079[2.00]X No. of Spaces .007[0.20] 01 E Mates with: BSTC BSTCM BSTCR BSTCRSM BSTS TBSTC TBSCM TBSTS TBSTCM TSHC TSHCR TSHCRE TSHCRSM TSHR TSHRE TSHS TSHSCM TTSHC TTSHCR TTSHCRE TTSHR TTSHRE TTSHS TTSHSM THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 10/19/15 CHECKED GWE 10/19/15 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com TITLE: SMBC-2-V SERIES SIZE DWG. NO. REV G C SCALE 8:1 DO NOT SCALE DRAWING 2 SHEET 1 OF 1 1