SMBC-502-D-02-T-H-LF

8 7 6 4 5 2 3 1 Recommended P.C. Board Layout SCALE 8:1 F Pin 1 Point of Contact .039[1.00] F .190 .356 [4.83] [9.03] E E .050[1.27] .033[0.83] .050[1.27]X No. of Positions .012[0.30] SMBC-5 XX - D - 02 - XX - H - XXX - XX - LF (A) (B) (C ) (D) (E) (F) (G) (H) D .050[1.27] .017[0.43] X .006[0.15] C G T GT H F FT .206[5.23] .050[1.27]X No. of Spaces .006[0.20] 80 .138 [3.50] .136 [3.45] .004[0.12] 79 01 Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 5 B Tails may be clipped to acheive specific dimensions Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: 6 C Materials: Contact Material: Copper Alloy Insulator Material: Polyester, LCP, UL 94 V-0 .306 [7.83] 7 Mates with: BSTC BSTCM BSTCR BSTCRSM BSTS TBSTC TBSCM TBSTS TBSTCM TSHC TSHCR TSHCRE TSHCRSM TSHR TSHRE TSHS TSHSCM TTSHC TTSHCR TTSHCRE TTSHR TTSHRE TTSHS TTSHSM Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Wave: 250°C up to 5-10 secs. Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 3-5 secs. 02 B 8 D A. Pins Per Row - 3 through 25 B. Row Specification - D= Double Row C. Mounting Style - 02= Surface Mount D. Plating Options - See Plating Options below E. H= Horizontal F. Polarized Position - Leave blank if not needed - If required, specify empty pin position - e.g. 012 for Pin 12 G. Packing Information - TR= Tape and Reel - TB= Tube - If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic H. Lead Free 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 01/21/15 CHECKED GWE 01/21/15 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: SMBC-5-H SERIES SIZE DWG. NO. REV B C SCALE: 12:1 SHEET 1 OF 1 1