MPS2222A

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# MPS2222A Features • • • • • Wide operating junction temperature: -55 oC+150 oC Capable of 600mWatts of Power Dissipation Collector-current 0.6A Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 Marking:Type number Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Parameter Collector-Emitter Breakdown Voltage* (I C=10mAdc, IB=0) Collector-Base Breakdown Voltage (I C=10µ Adc, IE=0) Emitter-Base Breakdown Voltage (I E=10µ Adc, IC=0) Base Cutoff Current (VCE=60Vdc, VBE=3.0Vdc) Collector Cutoff Current (VCE=60Vdc, VBE=3.0Vdc) DC Current Gain* (I C=0.1mAdc, VCE=10Vdc) (I C=1.0mAdc, VCE=10Vdc) (I C=10mAdc, VCE=10Vdc) (I C=150mAdc, VCE=10Vdc) (I C=150mAdc, VCE=1.0Vdc) (I C=500mAdc, VCE=10Vdc) Collector-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Base-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Current Gain-Bandwidth Product (I C=20mAdc, VCE=20Vdc, f=100MHz) Output Capacitance (VCB=10Vdec, IE=0, f=100kHz) Input Capacitance (VBE=0.5Vdc, IC=0, f=100kHz) Noise Figure (IC=100µAdc, VCE=10Vdc, RS=1.0kΩ f=1.0kHz) Delay Time (VCC=30Vdc, VBE=0.5Vdc Rise Time IC=150mAdc, IB1=15mAdc) Storage Time (VCC=30Vdc, IC=150mAdc Fall Time IB1=IB2=15mAdc) ≤ 300µ s, Duty Cycle ≤ 2.0% Min 40 75 6.0 20 10 Max NPN General Purpose Amplifier TO-92 A Vdc Vdc Vdc nAdc nAdc B E • Electrical Characteristics @ 25°C Unless Otherwise Specified Symbol Units OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX ON CHARACTERISTICS hFE C 35 50 75 100 50 40 300 VCE(sat) 0.3 1.0 0.6 1.2 2.0 Vdc D VBE(sat) Vdc SMALL-SIGNAL CHARACTERISTICS fT Cobo Cibo NF 300 8.0 25 4.0 MHz pF pF dB DIM A B C D E G INCHES MIN .175 .175 .500 .016 .135 .095 DIMENSIONS MM MAX .185 .185 ------.020 .145 .105 MIN 4.45 4.45 12.70 0.41 3.43 2.42 MAX 4.70 4.70 -------0.56 3.68 2.67 NOTE G E B C SWITCHING CHARACTERISTICS td tr ts tf *Pulse Width 10 25 225 60 ns ns ns ns www.mccsemi.com Revision: B 1 of 4 2011/03/18 MPS2222A DC Current Gain vs Collector Current 480 400 6 320 hFE 240 160 2 80 0 0.1 1 IC (mA) Collector Current vs Collector-Emitter Voltage 250 IB = 4mA 200 IC - (mA) 150 600 IB = 3mA PD(MAX) - (mW) IB = 2mA 400 800 10 100 10 IC - (mA) 4 VCE = 5.0V 8 MCC Micro Commercial Components Collector Current vs Collector-Emitter Voltage 35µA 30µ A 25µA 20µ A 15µ A 10µ A 5µ A TM 20 30 VCE- (V) 40 50 Maximum Power Dissipation vs Ambient Temperature TO-92 100 IB = 1mA 200 SOT-23 0 50 0 .5 1.0 VCE - (V) 1.5 2.0 0 50 100 TA - (°C) 150 200 Contours of Constant Gain Bandwidth Product (fT) 24 20 16 VCE - (V) 12 8 4 0 0.1 pF 8 12 10 Input and Output Capacitance vs Reverse Bias Voltage f = 1.0MHz CIB 6 COB 4 2 0.1 10 100 IC - (mA) *50MHz increments from 150 to 250MHz and 260MHz 1.0 1.0 Volts - (V) 10 www.mccsemi.com Revision: B 2 of 4 2011/03/18 MPS2222A Base Saturation Voltage vs Collector Current 1.4 1.0 .6 VBE(SAT) - (V) .1 .06 hfe=10 .1 hfe=20 .06 VCE(SAT) - (V) 1.4 1.0 .6 MCC Collector Saturation Voltage vs Collector Current TM Micro Commercial Components IC/IB = 10 TA = 125°C TA = 25°C .01 1.0 10 IC - (mA) 100 1000 .01 0.1 1.0 10 IC - (mA) 100 Base Saturation Voltage vs Collector Current 14 10 6 VBE(SAT) - (V) 1 0.6 TA=25°C VCE(SAT) - (V) .1 IC/IB = 10 4 1 .6 Collector Saturation Voltage vs Collector Current TA = 25°C hfe=20 .06 hfe=10 TA=125°C 0.1 1.0 10 IC - (mA) 100 1000 .01 0.1 1.0 10 100 IC - (mA) Switching Times vs Collector Current 1000 IB1 = IB2 = IC/10 ts 100 T - (ns) tr 10 tf td 1.0 1.0 10 IC - (mA) 100 www.mccsemi.com Revision: B 3 of 4 2011/03/18 MCC TM Micro Commercial Components Ordering Information : Device Part Number-AP Part Number-BP Packing Ammo Packing: 2Kpcs/Ammo Box Bulk: 100Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 4 of 4 2011/03/18 3