S3M

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# S3A THRU S3M 3 Amp Silicon Rectifier 50 to 1000 Volts DO-214AB (SMC) G • Features • • • • • • • • • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For Surface Mount Applications Low Thermal Resistance High Current Capability High Temp Soldering: 260°C for 10 Seconds At Terminals Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Maximum Thermal Resistance; 10°C/W Junction To Lead Maximum Ratings MCC Part Number S3A S3B S3D S3G S3J S3K S3M Device Marking S3A S3B S3D S3G S3J S3K S3M Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V DIM A B C D E F G H H D C A E B F DIMENSIONS INCHES MIN .079 .108 .002 .006 .030 ..305 .260 .220 MM MIN 2.00 2.75 0.051 0.152 0.76 7.75 6.60 5.59 Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward IF(AV) 3.0A Ta = 120°C Current Peak Forward Surge IFSM 100A 8.3ms, half sine Current Maximum VF IFM = 3.0A; Instantaneous 1.20V Forward Voltage TJ = 25°C* Maximum DC IR Reverse Current At TJ = 25°C 10µA Rated DC Blocking 250µA TJ = 125°C Voltage Typical Junction CJ 60pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse test: Pulse width 200 µsec, Duty cycle 2% Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. MAX .103 .128 .008 .012 .050 .320 .280 .245 MAX 2.62 3.25 0.203 0.305 1.27 8.13 7.11 6.22 NOTE SUGGESTED SOLDER PAD LAYOUT 0.190 0.125” 0.070” Revision: A www.mccsemi.com 1 of 4 2011/01/01 S3A thru S3M Figure 1 Typical Forward Characteristics 100 60 40 20 10 6 4 2 Amps 1 .5 .6 .4 .2 .1 .06 .04 .02 .01 .5 .7 .9 1.1 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 1.3 1.5 1.7 0 1.5 Amps 25°C 1.0 2.5 3.0 MCC TM Micro Commercial Components Figure 2 Forward Derating Curve 2.0 Single Phase, Half Wave 60Hz Resistive or Inductive Load 40 60 80 100 °C 120 140 160 Average Forward Rectified Current - Amperes versus Ambient Temperature - °C 100 60 40 20 pF 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 TJ=25°C Junction Capacitance - pF versus Reverse Voltage - Volts Revision: A www.mccsemi.com 2 of 4 2011/01/01 S3A thru S3M MCC Micro Commercial Components Figure 5 Peak Forward Surge Current 150 125 100 75 TM Figure 4 Typical Reverse Characteristics 1000 600 400 200 100 60 40 20 µAmps 10 6 4 2 1 .6 .4 .2 .1 20 40 TA=25°C 60 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes versus Percent Of Rated Peak Reverse Voltage - Volts 100 12 0 140 TA=125°C 25 0 1 2 4 6 8 10 Cycles Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles 20 40 60 80 100 Amps 50 Revision: A www.mccsemi.com 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01