SK63L

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# SK62L THRU SK610L 6 Amp Schottky Rectifier 20 to 100 Volts DO-214AB (SMC) (LEAD FRAME) G • Features Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For Surface Mount Applications Easy Pick And Place High Current Capability With Low Forward Voltage High Temp Soldering: 260°C for 10 Seconds At Terminals Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150 °C Maximum Thermal Resistance; 18°C/W Junction To Lead Maximum Recurrent Peak Reverse Voltage 20V 30V 40V 45V 50V 60V 80V 100V Maximum RMS Voltage 14V 21V 28V 31.5V 35V 42V 56V 70V Maximum DC Blocking Voltage 20V 30V 40V 45V 50V 60V 80V 100V DIM A B C D E F G H • • • • • • • • • Maximum Ratings MCC Part Number SK62L SK63L SK64L SK645L SK65L SK66L SK68L SK610L Device Marking SK62 SK63 SK64 SK645 SK65 SK66 SK68 SK610 H D A C E B F DIMENSIONS INCHES MIN .079 .108 .002 .006 .030 ..305 .260 .220 MM MIN 2.00 2.75 0.051 0.152 0.76 7.75 6.60 5.59 Electrical Characteristics @ 25° C Unless Otherwise Specified Average Forward IF(AV) 6.0A TJ = 120°C Current Peak Forward Surge IFSM 150A 8.3ms, half sine Current Maximum Instantaneous Forward Voltage SK62L-645L VF .65V IFM = 6.0A; SK65L-610L .85V TJ = 25°C* Maximum DC 1.0mA TJ = 25°C Reverse Current At IR 20mA TJ = 100°C Rated DC Blocking Voltage Typical Junction CJ 200pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse test: Pulse width 200 µsec, Duty cycle 2% Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. MAX .103 .128 .008 .012 .050 .320 .280 .245 MAX 2.62 3.25 0.203 0.305 1.27 8.13 7.11 6.22 NOTE SUGGESTED SOLDER PAD LAYOUT 0.190" 0.125” 0.070” www.mccsemi.com Revision: A 1 of 4 2011/01/01 SK62L thru SK610L Figure 1 Typical Forward Characteristics 1000 600 400 200 100 60 40 20 Amps 10 6 4 2 25°C 1 .6 .4 .2 .1 .2 .4 .6 .8 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 0 600 400 200 pF 100 60 40 20 10 .1 .2 .4 1 Volts 2 4 10 20 40 TJ =25°C 1.0 1.2 1.4 SK62L - SK645L SK65L-SK610L 1 3 Amps 2 5 6 MCC Micro Commercial Components Figure 2 Forward Derating Curve TM 4 Single Phase, Half Wave 60Hz Resistive or Inductive Load 60 80 100 120 °C Average Forward Rectified Current - Amperes versus Ambient Temperature - °C 140 160 180 0 100 200 400 1000 Junction Capacitance - pF versus Reverse Voltage - Volts www.mccsemi.com Revision: A 2 of 4 2011/01/01 SK62L thru SK610L MCC Micro Commercial Components TM Figure 4 Typical Reverse Characteristics 10 6 4 2 1 .6 .4 .2 µAmps .1 .06 .04 .02 .01 .006 .004 .002 .001 20 40 60 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes versus Percent Of Rated Peak Reverse Voltage - Volts 100 120 140 SK62L - 645L SK65L - 610L Amps 25°C Figure 5 Peak Forward Surge Current 150 125 100 75 50 25 0 1 2 4 6 8 10 20 Cycles Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles 40 60 80100 www.mccsemi.com Revision: A 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: A www.mccsemi.com 4 of 4 2011/01/01