40-60-M8-63-A1-SK

Leveling Feet GN 40 Steel, Tapped Socket or Threaded Stud Type Inch | Metric 4 Type (Base) A0 Without rubber pad / cap B0 Without rubber pad / cap, with 2 mounting holes A1 With rubber cap, clipped on, black A3 With rubber pad, vulcanized, black Inch table 1 2 3 d1 d2 l1 Thread Version S / SK 5/16 x 18 - - - - - - - -   3/8 x 16   4.92 125   4.92 125 -   5.91 150   5.91 150 - - - - - - - -   5/8 x 11   3.94 100   3.94 100 - -  1.57 * 40  1.97 50  1.97 50  1.97 50  1.97 50  2.36 60  2.36 60  2.36 60  2.36 60  3.15 80  3.15 80  3.15 80  3.15 80  3.15 80  2.95 75  2.95 75 -   2.95  75   3.94 100   4.92 125   5.91 150 5/16 x 18 - - - - - - - -   3/8 x 16   3.94 100   3.94 100 -   4.92 125   4.92 125 -   5.91 150   5.91 150 - - - - - - - - -   5/8 x 11  2.95 75  2.95 75 - 5/16 x 18 - - - -   2.95  75 -   3.94 100 -   4.92 125 -   5.91 150 -   3/8 x 16   3.94 100   3.94 100 -   4.92 125   4.92 125 -   5.91 150   5.91 150 - - - - - - - - -   5/8 x 11  2.95 75  2.95 75 - 5/16 x 18 - - - -   2.95  75 -   3.94 100 -   4.92 125 -   5.91 150 -   3/8 x 16   3.94 100   3.94 100 -   4.92 125   4.92 125 -   5.91 150   5.91 150 - - - - - - - - -   5/8 x 11  2.95 75  2.95 75 -   3/4 x 10 - - - -   2.95  75   3.94 100   3.94 100   4.92 125   4.92 125   5.91 150   5.91 150 -   1/2 x 13   1/2 x 13   1/2 x 13 l7 d3 h1 h6 m s  0.98 25  1.10 28  1.22 31  1.46 37 0.21 5.4 0.21 5.4 0.21 5.4 0.21 5.4 0.08 2 0.08 2 0.08 2 0.08 2 0.14 3.5 0.14 3.5 0.14 3.5 0.14 3.5  1.18 30  1.18 30  1.18 30  1.18 30 0.06 1.5 0.06 1.5 0.06 1.5 0.06 1.5  0.98 25  1.10 28  1.26 32  1.46 37  0.98 25  1.10 28  1.26 32  1.46 37  1.02 26  1.14 29  1.26 32  1.50 38  1.77 45 0.26 6.6 0.26 6.6 0.26 6.6 0.26 6.6 0.26 6.6 0.26 6.6 0.26 6.6 0.26 6.6 0.34 8.6 0.34 8.6 0.34 8.6 0.34 8.6 0.34 8.6 0.10 2.5 0.10 2.5 0.10 2.5 0.10 2.5 0.10 2.5 0.10 2.5 0.10 2.5 0.10 2.5 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.16 4 0.16 4 0.16 4 0.16 4 0.18 4.5 0.18 4.5 0.18 4.5 0.18 4.5 0.20 5 0.20 5 0.20 5 0.20 5 0.20 5  1.50 38  1.50 38  1.50 38  1.50 38  1.89 48  1.89 48  1.89 48  1.89 48  2.52 64  2.52 64  2.52 64  2.52 64  2.52 64 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 0.08 2 Version X Version U / UK  1.57 40  1.57 40  1.57 40   1/2 x 13 Dimensions in: inches - millimeters 3 * Not available in type B0 2 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements www.jwwinco.com | phone: 1-800-877-8351 GN 40 Leveling Feet continued (2/4) d1 d2 h3 h4 A/F1 A/F 2 A/F 3 A/F 7 1.57 40 5/16 x 18 - - - - - 0.55 14 0.31 8 1.57 40 3/8 x 16 0.43 11 - 0.67 17 - - 0.55 14 0.39 10 1.57 40 1/2 x 13 0.43 11 - 0.67 17 - - 0.67 17 0.47 12 1.57 40 5/8 x 11 - 0.67 17 - 0.47 12 0.87 22 0.63 16 1.97 50 5/16 x 18 - - - - - 0.55 14 0.31 8 1.97 50 3/8 x 16 0.43 11 - 0.67 17 - - 0.55 14 0.39 10 1.97 50 1/2 x 13 0.43 11 - 0.67 17 - - 0.67 17 0.47 12 1.97 50 5/8 x 11 - 0.67 17 - 0.47 12 0.87 22 0.63 16 2.36 60 5/16 x 18 - - - - - 0.55 14 0.31 8 2.36 60 3/8 x 16 0.43 11 - 0.67 17 - - 0.55 14 0.39 10 2.36 60 1/2 x 13 0.43 11 - 0.67 17 - - 0.67 17 0.47 12 2.36 60 5/8 x 11 - 0.67 17 - 0.47 12 0.87 22 0.63 16 3.15 80 5/16 x 18 - - - - - 0.55 14 0.31 8 3.15 80 3/8 x 16 0.47 12 - 0.67 17 - - 0.55 14 0.39 10 3.15 80 1/2 x 13 0.47 12 - 0.67 17 - - 0.67 17 0.47 12 3.15 80 5/8 x 11 - 0.71 18 - 0.47 12 0.31 8 0.87 22 0.63 16 3.15 80 3/4 x 10 - 0.75 19 - 0.59 15 0.39 10 1.06 27 0.79 20 Thread www.jwwinco.com | phone: 1-800-877-8351 0.31 8 0.31 8 0.31 8 t 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements | 3 GN 40 Leveling Feet continued (3/4) Stud / socket versions 5 5 5 SK Without nut UK Without nut SK With nut UK With nut External hexagon at the bottom at d2 3/8 x 16, 1/2 x 13 M 8, M 10, M 12 X Tapped socket type Internal hexagon at the top and wrench flat at the bottom at d2 5/8 x 11, 3/4 x 10 M 16, M 20, M 24 External hexagon with tapped socket at d2 5/16 x 18, 3/8 x 16, 1/2 x 13, 5/8 x 11, 3/4 x 10 M 8, M 10, M 12, M 16, M 20 Metric table 1 2 3 d1 d2 l1 Thread Dimensions in: millimeters - inches 3 Version S / SK 40  1.57 M 8 40  1.57 50  1.97  63   2.48 40  1.57 M 10 50  1.97 60  2.36  80   3.15 40  1.57 M 12 60  2.36 40 *  1.57 50  1.97 M 16 l7 d3 h1 h6 m s Version X Version U / UK - - - - - 25  0.98 5.4 0.21 2 0.08 3.5 0.14 30  1.18 1.5 0.06 100   3.94 - - - - 28  1.10 5.4 0.21 2 0.08 3.5 0.14 30  1.18 1.5 0.06 80  3.15 100 125   3.94   4.92 - - - - 31  1.22 5.4 0.21 2 0.08 3.5 0.14 30  1.18 1.5 0.06 - - -  75   2.95 100 125 150 200   3.94   4.92   5.91   7.87 37  1.46 5.4 0.21 2 0.08 3.5 0.14 30  1.18 1.5 0.06 M 8 40  1.57 50  1.97  63   2.48 - - - - - 25  0.98 6.6 0.26 2.5 0.10 4 0.16 38  1.50 2 0.08 50  1.97 M 10 50  1.97 60  2.36  80   3.15 100   3.94 - - - - 28  1.10 6.6 0.26 2.5 0.10 4 0.16 38  1.50 2 0.08 50  1.97 M 12 60  2.36 80  3.15 100 125   3.94   4.92 - - - - 32  1.26 6.6 0.26 2.5 0.10 4 0.16 38  1.50 2 0.08 50  1.97 M 16 - - -  75   2.95 100 125 150 200   3.94   4.92   5.91   7.87 37  1.46 6.6 0.26 2.5 0.10 4 0.16 38  1.50 2 0.08 60  2.36 M 8 40  1.57 50  1.97  63   2.48 - - - - - 25  0.98 6.6 0.26 2.5 0.10 4.5 0.18 48  1.89 2 0.08 60  2.36 M 10 50  1.97 60  2.36  80   3.15 100   3.94 - - - - 28  1.10 6.6 0.26 2.5 0.10 4.5 0.18 48  1.89 2 0.08 60  2.36 M 12 60  2.36 80  3.15 100 125   3.94   4.92 - - - - 32  1.26 6.6 0.26 2.5 0.10 4.5 0.18 48  1.89 2 0.08 60  2.36 M 16 - - -  75   2.95 100 125 150 200   3.94   4.92   5.91   7.87 37  1.46 6.6 0.26 2.5 0.10 4.5 0.18 48  1.89 2 0.08 80  3.15 M 8 40  1.57 50  1.97  63   2.48 - - - - - 26  1.02 8.6 0.34 3 0.12 5 0.20 64  2.52 2 0.08 80  3.15 M 10 50  1.97 60  2.36  80   3.15 100   3.94 - - - - 29  1.14 8.6 0.34 3 0.12 5 0.20 64  2.52 2 0.08 80  3.15 M 12 60  2.36 80  3.15 100 125   3.94   4.92 - - - - 32  1.26 8.6 0.34 3 0.12 5 0.20 64  2.52 2 0.08 80  3.15 M 16 - - - -  75   2.95 100 125 150 200   3.94   4.92   5.91   7.87 38  1.50 8.6 0.34 3 0.12 5 0.20 64  2.52 2 0.08 80  3.15 M 20 - - - -  75   2.95 100 125 150 200   3.94   4.92   5.91   7.87 45  1.77 8.6 0.34 3 0.12 5 0.20 64  2.52 2 0.08 80  3.15 M 24 - - - - 100   3.94 125 150 200   4.92   5.91   7.87 - 8.6 0.34 3 0.12 5 0.20 64  2.52 2 0.08 - - - - * Not available in type B0 4 | 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements www.jwwinco.com | phone: 1-800-877-8351 GN 40 Leveling Feet continued (4/4) d1 d2 h3 h4 A/F1 A/F 2 A/F 3 A/F 7 40 1.57 M 8 11 0.43 - 17 0.67 - - 14 0.55 8 0.31 40 1.57 M 10 11 0.43 - 17 0.67 - - 14 0.55 10 0.39 40 1.57 M 12 11 0.43 - 17 0.67 - - 17 0.67 12 0.47 40 1.57 M 16 - 17 0.67 - 12 0.47 22 0.87 16 0.63 50 1.97 M 8 11 0.43 - 17 0.67 - - 14 0.55 8 0.31 50 1.97 M 10 11 0.43 - 17 0.67 - - 14 0.55 10 0.39 50 1.97 M 12 11 0.43 - 17 0.67 - - 17 0.67 12 0.47 50 1.97 M 16 - 17 0.67 - 12 0.47 22 0.87 16 0.63 60 2.36 M 8 11 0.43 - 17 0.67 - - 14 0.55 8 0.31 60 2.36 M 10 11 0.43 - 17 0.67 - - 14 0.55 10 0.39 60 2.36 M 12 11 0.43 - 17 0.67 - - 17 0.67 12 0.47 60 2.36 M 16 - 17 0.67 - 12 0.47 22 0.87 16 0.63 80 3.15 M 8 12 0.47 - 17 0.67 - - 14 0.55 8 0.31 80 3.15 M 10 12 0.47 - 17 0.67 - - 14 0.55 10 0.39 80 3.15 M 12 12 0.47 - 17 0.67 - - 17 0.67 12 0.47 80 3.15 M 16 - 18 0.71 - 12 0.47 8 0.31 22 0.87 16 0.63 80 3.15 M 20 - 19 0.75 - 15 0.59 10 0.39 27 1.06 20 0.79 80 3.15 M 24 - 22 0.87 - 19 0.75 12 0.47 - - Thread 8 0.31 8 0.31 8 0.31 t Specifi cation Information • Base Steel, zinc plated, blue passivated finish GN 40 leveling feet are simple, economically priced components and can be used universally thanks to the wide range of possible combinations of the base and the adjusting spindle variants. The base with the rubber pad / cap protects sensitive surfaces and reduces lateral slippage. The type B0 can also be fastened to the mounting surface through two holes. • Threaded stud / tapped socket / hexagon nut ISO 4032 Steel, zinc plated, blue passivated finish • Rubber cap Santoprene ® (TPE) ≈ 80 shore A - Clipped on - Black • Rubber pad Perbunan® (NBR) 70 ±5 shore A - Vulcanized, non-skid - Black • RoHS compliant These leveling feet are supplied fully assembled and cannot be disassembled. see also... • Leveling Feet GN 42 (Steel, with Fixing Lug) • Leveling Feet GN 41 (Stainless Steel AISI 304, without Fixing Lug) • Leveling Feet GN 44 / GN 45 (Stainless Steel AISI 316, with / without Fixing Lug) • Threaded Tube Ends EN 448 (Plastic) • Threaded Tube Inserts GN 992 / GN 992.5 (Aluminum / Stainless Steel) How to order (Inch) 1 2 3 4 5 GN 40-40-3/8X16-75-A0-S How to order (Metric) 1 2 3 4 5 GN 40-80-M20-200-A3-U www.jwwinco.com | phone: 1-800-877-8351 1 Base diameter d1 2 Thread d 2 3 Length l1 (Length l7 ) 4 Type (Base) 5 Version (Stud / Socket) 1 Base diameter d1 2 Thread d 2 3 Length l1 (Length l7 ) 4 Type (Base) 5 Version (Stud / Socket) 3.4 Installing, Lifting, Damping with Leveling Feet, Lifting Gear and Rubber Elements | 5