UF1A_11

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# UF1A THRU UF1M 1 Amp Surface Mount Ultra Fast Rectifier 50 to 1000 Volts DO-214AA (SMB) (LEAD FRAME) H • Features Lead Free Finish/RoHS Compliant(NOTE 1) ("P" Suffix designates RoHS Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Glass passivated junction Easy pick and place High Temp Soldering: 260 °C for 10 Seconds At Terminals Superfast Recovery Times For High Efficiency • • • • • • • • • Maximum Ratings °C to +150°C Operating Temperature: -50 Storage Temperature: -50°C to +150°C Maximum Thermal Resistance; 30°C/W Junction To Lead MCC Device Maximum Maximum Maximum Catalog Marking Reccurrent RMS DC Number Peak Reverse Voltage Blocking Voltage Voltage UF1A UF1A 50V 35V 50V UF1B UF1B 100V 70V 100V UF1D UF1D 200V 140V 200V UF1G UF1G 400V 280V 400V UF1J UF1J 600V 420V 600V UF1K UF1K 800V 560V 800V UF1M UF1M 1000V 700V 1000V J A C E F G D B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage IF(AV) IFSM 1.0A 30A TL = 100°C 8.3ms, half sine DIM A B C D E F G H J INCHES MIN .083 .075 .002 ----.030 .065 .200 .160 .130 MAX .096 .083 .008 .02 .050 .091 .220 .185 .155 DIMENSIONS MM MIN 2.11 1.91 .05 ----.76 1.65 5.08 4.06 3.30 UF1A-D UF1G UF1J-M Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time UF1A-G UF1J-M Typical Junction Capacitance Note: VF 1.0V 1.4V 1.7V 10µA 100µA IFM = 1.0A; TJ = 25°C* TA = 25°C TA = 125°C MAX 2.44 2.11 .20 .51 1.27 2.32 5.59 4.70 3.94 NOTE IR SUGGESTED SOLDER PAD LAYOUT 0.085" 0.095” Trr CJ 50ns 100ns 17pF IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V 0.075” *Pulse test: Pulse width 200 µsec, Duty cycle 2% 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. www.mccsemi.com Revision: A 1 of 3 2011/01/01 UF1A thru UF1M trr +0.5A 0 -0.25 MCC TM Micro Commercial Components NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. Source Impedance = 50 Ohms -1.0 SET TIME BASE FOR 50 ns/cm 1cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 10 TYPICAL TJ = 25 PEAK FORWARD SURGE CURRENT, AMPERES 100 TJ = 25 f = 1.0MHz Vsig = 50m Vp-p IFM, Apk 1.0 UF1G UF1A 10 0.1 UF1K .01 1 0.1 1 10 100 0 .2 .4 .6 .8 1.0 1.2 1.4 REVERSE VOLTAGE, VOLTS Fig. 2-FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, AMPERES Fig. 3- TYPICAL JUNCTION CAPACITANCE 30 25 20 15 10 5 8.3ms SINGLE HALF SINE WAVE JEDEC METHOD 2.0 AVERAGE FORWARD CURRENT AMPERES SINGLE PHASE HALF WAVE RESISTIVE OR INDUCTIVE P.C.B MOUNTED ON 0.315×0.315"(8.0×8.0mm) PAD AREAS 1.0 25 50 75 100 125 150 175 1 2 5 10 20 50 100 LEAD TEMPERATURE NUMBER OF CYCLES AT 60Hz Fig. 4- FORWARD CURRENT DERATING CURVE Fig. 5-PEAK FORWARD SURGE CURRENT www.mccsemi.com Revision: A 2 of 3 2011/01/01 MCC TM Micro Commercial Components Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 3 of 3 2011/01/01 3