SPR01O-09

1W DC-DC Regulated Single Output Converter Features : 1000VDC I/O isolation Internal SMD technology Built-in EMI filter Cooling by free air convection Non-conductive plastic case Single in line package DIP packge is available 100% burn-in test Low cost / High reliability Approvals: FCC / CE 2 years warranty SPR01L-05 DC OUTPUT VOLTAGE INPUT CURRENT RANGE EFFICIENCY ORDER NO. DC OUTPUT VOLTAGE INPUT CURRENT RANGE EFFICIENCY 5V 0 ~ 200mA 57% SPR01L-12 12V 0 ~ 84mA 58% 60% 60% 58% 65% SPR01M-12 62% SPR01N-12 62% SPR01O-12 SPR01M-05 SPR01N-05 SPR01O-05 SPR01L-09 9V 0 ~ 100mA 57% SPR01L-15 15V 0 ~ 67mA 60% 62% 60% SPR01 series SELECTION GUIDE ORDER NO. SPR01M-09 SPR01N-09 SPR01O-09 60% SPR01N-15 56% SPR01O-15 SPR01M-15 60% 58% SPECIFICATION 1W RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION 1.0% LOAD REGULATION VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE RANGE NORMAL VOLTAGE INPUT INPUT CURRENT FILTER PROTECTION OVERLOAD PROTECTION (Note. 4) Note.3 1.0% RATED POWER OUTPUT 2.0%(Typ.) 50KHz min. 4.5 ~ 5.5V 5V 3.0%(max.) 10.8 ~ 13.2V 12V 141mA 15mA 21.6 ~ 26.4V 24V 67mA 10mA 43.2 ~ 52.8V 48V 35mA 6mA 4.5 ~ 5.5V 5V 350mA 32mA 10.8 ~ 13.2V 12V 141mA 15mA 21.6 ~ 26.4V 24V 67mA 10mA 43.2 ~ 52.8V 48V 35mA 6mA Full load 350mA No load 32mA Capacitor type Fuse recommended Momentary Protection type : Hiccup mode, recovers automatically after fault condition is removed Momentary Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +71 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -25 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes I/P-O/P:1KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH 80pF max. Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A 700khrs min. MIL-HDBK-217F(25 ) 19.6*7.1*10.2mm or 0.77"*0.28"*0.40" inch (L*W*H) 2.3g SHORT CIRCUIT WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE SAFETY & ISOLATION CAPACITANCE EMC EMI CONDUCTION & RADIATION EMS IMMUNITY OTHERS MTBF DIMENSION WEIGHT Mechanical Specification 19.6 (0.77) 3.81 (0.15) 10.14 (0.40) Pin Configuration Unit: mm (inch) Derating Curve Pin No. FRONT VIEW Output 100 LOAD (%) 1 2 4 6 +Vin -Vin -Vout +Vout 80 0.5 (0.02) 7.1 (0.28) 1 2 4 6 5.08 (0.20) BOTTOM VIEW -25 0 25 50 60 71 100 1.2 (0.05) Ta ( ) NOTE 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Load regulation is measured from 10% to 100% rated load. 4.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name: SPR01-SPEC 2008-05-08