NMA-2102

s NMA 2100 NOISE SOURCE SERIES 100HZ TO 1GHZ DIP package 6.2008 DESCRIPTION The NMA 2100 High Power Noise Source Series are designed for testing wideband systems (CDMA, spread spectrum, FM, VHF, UHF) with wideband signals. Available in standard 24 Pin DIP packages for easy system integration, as well as SMA connectorized packages. T package SPECIFICATIONS NMA 2100 OUTPUT CHARACTERISTICS MODEL* NMA-2101 NMA-2102 NMA-2103 NMA-2104 NMA-2105 NMA-2106 NMA-2107 NMA-2108 NMA-2109 FREQUENCY FLATNESS mV/BAND NOISE OUTPUT LEVEL µV/√=Hz dBm/BAND 561 550 300 174 95 55 30 17 13 -2.0 +2.6 +2.6 +2.6 +2.6 +2.6 +2.6 +2.6 +2.6 dBm/Hz ENR(dB) + 100Hz-100kHz + 100Hz-300kHz + 100Hz-1MHz + 100Hz-3MHz + 100Hz-10MHz + 100Hz-30MHz 1kHz-100MHz 1kHz-300MHz 1kHz-500MHz ±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.5dB ±2.0dB ±2.0dB 177 300 300 300 300 300 300 300 300 -52.0 -52.2 -57.5 -62.2 -67.5 -72.2 -77.4 -82.2 -84.4 122.0 121.8 116.5 111.8 106.5 101.8 96.6 91.8 89.6 ■ Operating Temperature: -55 to +95oC ■ Storage Temperature: -65 to +125oC ■ Supply Voltage: +15 VDC ■ Temperature Stability: 0.025 dB/oC ■ Output Impedance: 50 ohm ■ Peak Factor: 5:1 APPLICATIONS ■ Back-up source in redundant transmitters ■ Built-in self-test in communication receivers ■ Power distribution in cellular base stations ■ Component testing NMA-2110 1kHz-1GHz ±2.0dB 300 10 +2.6 -87.4 86.6 * Available in SMA connectorized package, specify on quote/orders by adding “S” to Model No. + Low frequency limit of 100Hz requires a 47mf capacitor wired between pins 13 and 15. Low frequency limit is 500 Hz without capacitor for 50 ohm models only. Warning: when using a narrow band filter following the noise module, use a 3 dB or greater pad to prevent damage caused by reflected power. reference pakage styles: E , T, S for dimensions MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 WEB: WWW.MICRONETICS.COM