LFCN-5850+

Ceramic Low Pass Filter 50Ω LFCN-5850+ DC(1) to 5850 MHz Features Maximum Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input* 8W max. at 25°C * Passband rating, derate linearly to 3W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN 1 RF OUT 3 GROUND 2,4 Outline Drawing Generic photo used for illustration purposes only • excellent power handling, 8W • small size • 7 sections • temperature stable • hermetically sealed • LTCC construction • protected by U.S. Patent 6,943,646 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications and Reel Available Tape cost at no extra Applications Reel Size Devices/Reel 20, 50, 100, 200, 500,1000, 3000 7” • harmonic rejection • VHF/UHF transmitters/receivers • lab use Electrical Specifications(1,2) at 25°C Parameter (ON TOP) CASE STYLE: FV1206 Pass Band Stop Band (ON TOP) Insertion Loss Freq. Cut-Off VSWR Rejection Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit DC-F1 F2 DC-F1 F3 F4-F5 F5-F6 DC-5850 6540 DC-5850 7600 7100-9900 9900-12500 — — — 20 — — — 3.0 1.3 — 30 20 2 — — — — — dB dB :1 dB dB dB F3-F6 7600-12500 — 17 — :1 (1) In Applications where DC isolation to ground is required, coupling capacitors are recommended to avoid DC leakage. Alternatively, if DC pass IN-OUT is required, Mini-Circuits’ “D” suffix version of this model will support DC IN-OUT, and provide>100 MOhm isolation to ground. (2) Measured on Mini-Circuits Characterization Test Board TB-270. ATTENUATION (dB) Typical Frequency Response PCB Land Pattern Electrical Schematic 40 R F IN R F OUT 20 3 1 DC F5 F1 F2 F3 F4 FREQUENCY F6 Typical Performance Data at 25°C Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .126 3.20 B .063 1.60 C .037 0.94 D .020 0.51 E .032 0.81 F .009 0.23 G .169 4.29 H .087 2.21 J .024 0.61 K .122 3.10 L .024 0.61 M .087 2.21 N .012 0.30 P wt .071 grams 1.80 .020 Demo Board MCL P/N: TB-270 Suggested PCB Layout (PL-137) Frequency (MHz) Insertion Loss (dB) 40 500 2000 4000 5100 5850 0.03 0.10 0.28 0.50 0.63 1.21 1.04 1.05 1.25 1.39 1.13 1.55 6400 6540 6700 6900 7050 7100 2.10 4.07 9.14 19.10 31.56 40.23 1.35 2.62 6.13 12.09 15.81 16.41 7600 9900 10500 12500 15000 30.23 29.70 25.82 20.25 13.43 23.18 16.11 11.77 14.38 14.74 LFCN-5850+ INSERTION LOSS LFCN-5850+ VSWR 100 50 40 VSWR INSERTION LOSS(dB) 60 VSWR (:1) 30 10 20 10 0 1 0 3000 6000 9000 12000 FREQUENCY (MHz) 15000 0 3000 6000 9000 12000 15000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. F M173979 LFCN-5850+ EDR-8033/2U RAV/URJ 190426 Page 1 of 1