F0515XT-2WR3-TR

DC/DC Converter F05_XT-2WR3(-TR) Series FEATURES 2W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +105℃  High efficiency up to 86% RoHS  Compact SMD package  I/O isolation test voltage 3k VDC Patent Protection  Industry standard pin-out EN 62368-1 BS EN 62368-1 F05_XT-2WR3(-TR) series are designed for use in distributed power supply systems and especially suitable in applications such as pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Output Input Voltage (VDC) Certification EN/BS EN Part No.* Full Load Capacitive Load Nominal Voltage Current(mA) (Range) (VDC) Max./Min. Efficiency (%) Min./Typ. F0503XT-2WR3(-TR) 3.3 400/40 74/78 2400 F0505XT-2WR3(-TR) 5 400/40 80/84 2400 F05X7XT-2WR3(-TR) 7 286/29 80/84 1000 5 (4.5-5.5) F0509XT-2WR3(-TR) (µF)Max. 9 222/22 81/85 1000 12 167/17 81/85 560 F0515XT-2WR3(-TR) 15 133/13 82/86 560 F0524XT-2WR3(-TR) 24 83/8 82/86 220 F0512XT-2WR3(-TR) Note: * Product model suffix “-TR” indicates reel packaging. Input Specifications Item Input Current (full load / no-load) Operating Conditions 5VDC input Min. Typ. Max. 3.3VDC output -- 339/8 357/-- 5VDC/7VDC output -- 477/8 500/-- 9VDC/12VDC output -- 471/8 494/-- 15VDC/24VDC output -- 466/8 488/-- -- 15 -- -0.7 -- 9 Reflected Ripple Current* Surge Voltage (1sec. max.) Input Filter Unit mA VDC Capacitance filter Hot Plug Unavailable Note: *Reflected ripple current testing method please refer to DC-DC Converter Application Note for specific operation. Output Specifications Item Operating Conditions Min. Voltage Accuracy Linear Regulation Load Regulation Typ. Max. Unit See output regulation curve (Fig. 1) Input voltage change: ±1% 10%-100% load 3.3VDC output 5VDC/7VDC/9VDC/12VDC /15VDC/24VDC output -- -- ±1.5 -- -- ±1.2 3.3VDC output -- 10 20 5VDC/7VDC output -- 9 15 9VDC output -- 8 10 12VDC/15VDC output -- 7 10 24VDC output -- 6 10 -- % Ripple & Noise* 20MHz bandwidth -- 75 200 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ 2022.01.13-A/1 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-2WR3(-TR) Series Short-circuit Protection Continuous, self-recovery Note:* The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Input-output electric strength test for 1 minute with a leakage current of 1mA max. Input-output resistance at 500VDC Isolation Insulation Resistance Isolation Capacitance Min. Typ. Max. Unit 3000 -- -- VDC 1000 -- -- MΩ -- 20 -- pF -40 -- 105 -55 -- 125 25 -- Input-output capacitance at 100kHz/0.1V Derating when operating temperature≥85℃, (see Fig. 2) Operating Temperature Storage Temperature ℃ Case Temperature Rise Ta=25℃ -- Storage Humidity Non-condensing %RH 5 -95 Peak temp. Tc≤245℃, maximum duration time≤60s over 217℃ Switching Frequency Full load, nominal input voltage -- 220 MTBF MIL-HDBK-217F@25℃ 3500 -- Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D.1 Reflow Soldering Temperature* Vibration 10-150Hz, 5G, 0.75mm. along X, Y and Z -- kHz -- k hours Level 1 Note: * See also IPC/JEDEC J-STD-020D.1. Mechanical Specifications Case Material Dimensions Black plastic; flame-retardant and heat-resistant (UL94V-0) 13.20 x 11.40 x 7.25 mm Weight 1.4g(Typ.) Cooling Method Free air convection Electromagnetic Compatibility (EMC) Emissions Immunity CE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) RE CISPR32/EN55032 CLASS B (see Fig. 4 for recommended circuit) ESD IEC/EN61000-4-2 Air ±8kV, Contact ±6kV Typical Characteristic Curves 3.3VDC output perf. Criteria B 5VDC/7VDC/9VDC/12VDC/15VDC/24VDC output Fig. 1 2022.01.13-A/1 Page 2 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-2WR3(-TR) Series Output Power Percent(%) Temperature Derating Curve 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 85 105 120 Ambient Temp.(℃) Fig. 2 Efficiency Vs Output Load (Vin=5V) Design Reference 1. Typical application Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig. 3. Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1. Table 1: Recommended input and output capacitor values Vin Cin Vo Cout +Vo Vin C in DC DC GND C out 0V Fig. 3 5VDC 4.7µF/16V 3.3VDC/5VDC 10µF/16V -- -- 7VDC/9VDC 4.7µF/16V -- -- 12VDC 2.2µF/25V -- -- 15VDC 1µF/25V -- -- 24VDC 0.47µF/50V 2. EMC compliance circuit Emissions C1, C2 4.7µF /16V C3 Refer to the Cout in Fig. 3 CY 270pF/4kV LDM 6.8µH Fig. 4 3. For additional information, please refer to DC-DC converter application notes on www.mornsun-power.com 2022.01.13-A/1 Page 3 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-2WR3(-TR) Series Dimensions and Recommended Layout Tape and Reel Info 2022.01.13-A/1 Page 4 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation DC/DC Converter F05_XT-2WR3(-TR) Series Notes: 1. 2. 3. 4. 5. 6. 7. 8. For additional information on Product Packaging please refer to www.mornsun-power.com. Tube Packaging bag number: 58210024, Roll Packaging bag number: 58200054; If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; The maximum capacitive load offered were tested at input voltage range and full load; Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity