DSE0133V2NBC

DSE/DAE/DCE Series www.murata-ps.com 400W Eighth Brick DOSA Digital PMBus Interface Output Voltage (V) Output Current (A) Input Voltage (V) 12 33 36-75 FEATURES PRODUCT OVERVIEW „„ DOSA Compliant Digital Eighth-Brick with PMBus interface „„ 36-75Vin Range Murata Power Solutions is introducing the first in a series of DOSA compliant, digitally controlled DC-DC converters that are based on a 32-bit ARM processor. The DSE series provides a fully regulated, digitally controlled DC output in a 1/8-brick format that will support the DOSA industry standard footprint for isolated board mounted power modules. The DSE series supports advances in power conversion technology including a digital interface supporting the PMBus protocol for communications to power modules. The DSE0133V2 is an isolated, regulated, 396W-12Vout eighth brick that supports the TNV input voltage range of 36V–75V with a typical efficiency of 95.5%. The DSE series „„ 95.5% Typical Efficiency „„ Delivers up to 33A (400W) „„ Low Output Ripple & Noise „„ Wide Operating Temperature Range -40°C to +85°C „„ Optional Droop Load Sharing of two or more modules „„ Baseplate included for improved thermal performance „„ Output Over Current/Voltage Protection „„ Over Temperature Protection „„ Negative & Positive Logic (Negative Logic standard configuration) „„ Basic insulation, 2250Vdc I/O Isolation compliant with IEEE802.3 PoE Standards „„ Optional Reflow processable „„ Three pin/function configurations available: [1] Full PMBus with Sense & Trim Pins [2] No PMBus with Sense & Trim Pins [3] 5 Pin Bus converter, No Sense & Trim Pins „ Certified to UL/EN/IEC 60950-1, CAN/CSA-C22.2 No. 60950-1, 2nd Edition, safety approvals and EN55022/CISPR22 standards Applications „„ Distributed Power Architectures also incorporates a “droop” load sharing option that allows connecting two or more units together in parallel for demanding power-hungry applications or to provide redundancy in high reliability applications. The converter also offers high input to output isolation of 2250 VDC as required for Power over Ethernet (PoE) applications. The DSE series is suitable for applications covering MicroTCA, servers and storage applications, networking equipment, Telecommunications equipment, Power over Ethernet (PoE), fan trays, wireless networks, wireless preamplifiers, and industrial and test equipment, along with other applications requiring a regulated 12V. DSE DAE „„ Intermediate Bus Voltage Applications „„ Networking Equipment including POE applications „„ Servers & Storage Applications „„ Fan Tray assemblies along with other applications requiring a regulated Voltage source DCE For full details go to www.murata-ps.com/rohs www.murata-ps.com/support SDC_DSE_DAE_DCE0133V2.A01D15 Page 1 of 19 DSE/DAE/DCE Series 400W Eighth Brick DOSA Digital PMBus Interface PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE [1] Output Input Root Model Vout (V) IOUT (A, max.) Total Power (W) Ripple & Noise (mVp-p) DSE0133V2 DAE0133V2 DCE0133V2 12 12 12 33 33 33 396 396 396 80 80 80 Regulation (Typ.) Line Load (mV) (mV) 36 36 36 36 36 36 Efficiency Vin (V, Nom.) Range (V) Iin, full load (A) Typ. 48 48 48 36-75 36-75 36-75 11.7 11.7 11.7 95.5% 95.5% 95.5% Notes: [1] Typical at TA = +25°C under nominal line voltage and full-load conditions. All models are specified with an external 1μF multi-layer ceramic and 10μF capacitors across their output pins. Part Number Structurer Product Family[1] Form Factor Vout Output Current Vin Range Logic D S E Pin Length[2] Mechanical Configuration Load Sharing Reflow compliant[2] Specific Customer Configuration RoHS 01 33 V2 N X B S R X X X DS = DOSA Standard Digital Eighth Brick W/Sense & Trim, W/PMBus DA = DOSA Analog Eighth Brick W/Sense & Trim, No PMBus DC = DOSA Analog Eighth Brick ( 5pin IBC) E = Eighth Brick 01 = 12Vout, 02 = 5Vout, 03 = 3.3 Vout Max Iout in Amps V2 = 36-75V N=Negative Logic, P=Positive Logic 1 = 0.110"(2.79 mm), 2 = 0.145"(3.68 mm), 3 = 0.220”(5.58mm), Omit for standard pin length 0.180”( 4.57mm) (shown in the mechanical drawings) B = Baseplate S = Load Sharing Feature, Omit for Standard R = MSL-3 compliant Packaging, Omit for Standard through hole processing Customer Code, Omit for Standard C RoHS 6/6 Compliant Example Part Number DSE0133V2N2BSRC DOSA Digital Eighth Brick, 12Vout@33A, Negative Logic, 0.145” Pin length, Baseplate, Load sharing, Reflow MSL-3 compliant, RoHS 6/6. [1] Load Sharing on DSE ( with PMBus) will not include Sense & Trim Pins. Load sharing is NOT available on DAE modules. [2] Minimum order quantity is required. Samples available with standard pin length only. www.murata-ps.com/support SDC_DSE_DAE_DCE0133V2.A01D15 Page 2 of 19 DSE/DAE/DCE Series 400W Eighth Brick DOSA Digital PMBus Interface FUNCTIONAL SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS Conditions [1] Minimum Typical/Nominal Maximum Units Input Voltage, Continuous 0 75 Vdc Input Voltage, Transient 100 mS max. duration 100 Vdc Isolation Voltage Input to output 2250 Vdc On/Off Remote Control Power on, referred to -Vin 0 13.5 Vdc Output Power 0 396 W Output Current Current-limited, no damage, short-circuit protected 0 33 A Storage Temperature Range Vin = Zero (no power) -55 125 °C Absolute maximums are stress ratings. Exposure of devices to greater than any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Specifications Table is not implied nor recommended. General Conditions for Device under Test unless otherwise specified: Typical at TA = +25°C under nominal line voltage and nominal load conditions. All models are specified with an external 220μF input capacitor and 1μF & 10μf capacitors across their output pins. INPUT Operating voltage range (V2) Start-up threshold Undervoltage shutdown Internal Filter Type External Input fuse Input current Full Load Conditions Low Line input current Inrush Transient Short Circuit input current No Load input current Shut-Down input currrent (Off, UV, OT) Back Ripple Current 48 34 31 Pi 20 75 36 34 Vin = nominal Vin = minimum Vin = 48V. 8.80 11.70 0.7 Vin = 48V, Iout = 0, unit=ON 80 9.30 12.20 1 0.2 150 35 No filtering 1.5 (Default, configurable via PMBus) (Default, configurable via PMBus) 36 32 28 Vdc Vdc Vdc A A A A2-Sec. A mA mA Ap-p GENERAL and SAFETY Efficiency Vin = 48V, full load Input to output Input to Baseplate Output to Baseplate Isolation Voltage 94.5 95.5 2250 1500 1500 Insulation Safety Rating Isolation Resistance Isolation Capacitance Basic 10 1500 Certified to UL-60950-1, CSA-C22.2 No.60950-1, IEC/EN60950-1, 2nd edition Per Telcordia SR-332, Issue 3, Method 1, Class 1, Ground Fixed, Tcase=+25°C Safety Calculated MTBF % Vdc Vdc Vdc   MΩ pF Yes 4900 Hours x 103 200 N/A KHz KHz DYNAMIC CHARACTERISTICS Switching Frequency (Configurable via PMBus) Fixed Frequency Control Variable Frequency Control (Default) Turn On Time (Configurable via PMBus) Vin On to Vout Regulated Remote On to Vout Regulated Vout Rise Time (Default, Configurable via PMBus) From 10%~90% Vout Fall Time of Regulated Off (Default, Configurable via PMBus) From 90%~10% Dynamic Load Response Dynamic Load Peak Deviation Dynamic Load Response Dynamic Load Peak Deviation 40 50 8 mS mS 30 mS 200 300 µSec ±250 120 ±500 ±350 200 ±750 mV µSec mV 0.1 13.5 0.8 0.2 Vdc Vdc mA 0.8 13.5 0.2 10 Vdc Vdc mA % N/A 50-75-50%, 0.1A/us,within 1% of Vout (Vin=Vinnom, tested with a 1.0 μF ceramic, 10 μF tantalum and 330μF low ESR polymer capacitor across the load.) 50-75-50%, 1A/us,within 1% of Vout (Vin=Vinnom, tested with a 1.0 μF ceramic, 10 μF tantalum and 330μF low ESR polymer capacitor across the load.) mS FEATURES and OPTIONS Remote On/Off Control Primary On/Off control (designed to be driving with an open collector logic, Voltages referenced to -Vin) “P” Suffix: Positive Logic, ON State ON = pin open or external voltage Positive Logic, OFF State OFF = ground pin or external voltage Control Current Open collector / drain “N” Suffix: Negative Logic, ON state ON = ground pin or external voltage Negative Logic, OFF state OFF = pin open or external voltage Control Current Open collector / drain Remote Sense Compliance Sense pins connected externally to respective Vout pins 3.5 0 -0.1 3.5 0.1 www.murata-ps.com/support SDC_DSE_DAE_DCE0133V2.A01D15 Page 3 of 19 DSE/DAE/DCE Series 400W Eighth Brick DOSA Digital PMBus Interface OUTPUT Total Output Power Voltage Initial Output Voltage Output Voltage Output Adjust Range Overvoltage Protection Voltage Droop Voltage Droop, for “S” suffix Current Output Current Range Minimum Load 0 Vin = 48V, Iout = 0A, temp=25°C, with/without "S" suffix VOUT_DROOP = 0 mΩ, All conditions Hardware TRIM Configurable via PMBus Default, configurable via PMBus Default, configurable via PMBus Load Regulation Ripple and Noise 12 14.4 0 7 0 396 W 12.03 12.18 13.2 15.6 Vdc Vdc Vdc Vdc mΩ mΩ 33 A 45 A No minimum load 90% of Vnom., after warmup, Configurable via PMBus (Need check the OCP Inception of Vout is whether reasonable) Current Limit Inception [2] Short Circuit Short Circuit Current Short Circuit Duration (remove short for recovery) Short circuit protection method Regulation [3] Line Regulation 11.97 11.82 9.6 13.8 396 37 41 Hiccup technique, autorecovery within 1% of Vout 0.2 Output shorted to ground, no damage Continuous Hiccup current limiting Non-latching Vin = 36-75, Vout = nom., full load Iout = min. to max., Vin = nom. |Vout @ min_load - Vout @ max_load| 5Hz-20MHz BW, Cout = 1µF Vin=nom and Io=min to max, tested with a 1.0μF ceramic, 10 μF tantalum and 330μF low ESR polymer capacitors across the load Temperature Coefficient Maximum Output Capacitance PMBus Monitoring Accurracy VIN_READ VOUT_READ IOUT_READ TEMP_READ 36 mV 36 mV 300 mV pk-pk 47 10,000 % of Vnom./°C μF -7 -2 -4 -5 7 2 4 5 % % A °C At all outputs Low ESR, 50% ceramic, and 50% OSCON or POSCAP A 0.01 0.02 MECHANICAL Outline Dimensions (with baseplate) 2.3 x 0.9 x 0.55 2.32 x 0.92 x 0.57 58.42 x 22.86 x 14 58.93 x 23.37 x 14.5 1.94 55.0 0.04 & 0.062 1.016 & 1.575 0.02 0.5 Copper alloy 98.4-299 4.7-19.6 LxWxH Weight (with baseplate) Through Hole Pin Diameter Digital Interface Pin Diameter Through Hole Pin Material TH Pin Plating Metal and Thickness Nickel subplate Gold overplate Inches mm Ounces Grams Inches mm µ-inches µ-inches ENVIRONMENTAL Operating Ambient Temperature Range Operating Baseplate Temperature Storage Temperature Thermal Protection/Shutdown (with “B” Suffix) Electromagnetic Interference Conducted, EN55022/CISPR22 RoHS Rating With derating Vin = Zero (no power) Baseplate temperature measured in the center External filter required; see emissions performance test. -40 -40 -55 85 110 125 °C °C °C 130 °C B Class RoHS-6 Notes: [1] Typical at TA=+25°C under nominal line voltage and full-load conditions. All models are specified with an external 1μF multi-layer ceramic and 10μF capacitors across their output pins. [2] Over-current protection is non-latching with auto recovery (Hiccup). [3] Regulation specifi cations describe the output voltage changes as the line voltage or load current is varied from its nominal or midpoint value to either extreme. www.murata-ps.com/support SDC_DSE_DAE_DCE0133V2.A01D15 Page 4 of 19 DSE/DAE/DCE Series 400W Eighth Brick DOSA Digital PMBus Interface CMD Command Name 01h 02h 03h 10h 11h 12h 15h 16h 19h 20h 21h 22h 28h 40h 41h 42h 46h 47h 4Ah 4Fh 50h 51h 55h 56h 57h 58h 59h 5Ah 5Eh 5Fh 60h 61h 64h 65h 78h 79h 7Ah 7Bh 7Ch 7Dh 7Eh 88h 8Bh 8Ch 8Dh 8Eh 94h 95h 96h 98h 99h 9Ah 9Bh 9Dh 9Eh A0h A1h A2h A3h A4h A5h A6h A7h A8h A9h B0h OPERATION2 ON_OFF_CONFIG3 CLEAR_FAULTS WRITE_PROTECT STORE_DEFAULT_ALL4 RESTORE_DEFAULT_ALL4 STORE_USER_ALL4 RESTORE_USER_ALL4 CAPABILITY VOUT_MODE VOUT_COMMAND VOUT_TRIM VOUT_DROOP VOUT_OV_FAULT_LIMIT VOUT_OV_FAULT_RESPONSE5 VOUT_OV_WARN_LIMIT IOUT_OC_FAULT_LIMIT IOUT_OC_FAULT_RESPONSE6 IOUT_OC_WARN_LIMIT OT_FAULT_LIMIT OT_FAULT_RESPONSE5 OT_WARN_LIMIT VIN_OV_FAULT_LIMIT VIN_OV_FAULT_RESPONSE7 VIN_OV_WARN_LIMIT VIN_UV_WARN_LIMIT VIN_UV_FAULT_LIMIT VIN_UV_FAULT_RESPONSE7 POWER_GOOD_ON POWER_GOOD_OFF TON_DELAY TON_RISE16 TOFF_DELAY TOFF_FALL16 STATUS_BYTE STATUS_WORD STATUS_VOUT STATUS_IOUT STATUS_INPUT STATUS_TEMPERATURE STATUS_CML READ_VIN READ_VOUT READ_IOUT READ_TEMPERATURE_18 READ_TEMPERATURE_29 READ_DUTY_CYCLE READ_FREQUENCY READ_POUT PMBUS_REVISION MFR_ID MFR_MODEL10 MFR_REVISION10 MFR_DATE10 MFR_SERIAL10 MFR_VIN_MIN MFR_VIN_MAX MFR_IIN_MAX MFR_PIN_MAX MFR_VOUT_MIN MFR_VOUT_MAX MFR_IOUT_MAX MFR_POUT_MAX MFR_TAMBIENT_MAX MFR_TAMBIENT_MIN USER_DATA_00 SMBus Transaction Type: Writing Data SMBus Transaction Type: Reading Data Number Of Data Bytes Write Byte Write Byte Send byte Write Byte Send byte Send byte Send byte Send byte N/A N/A Write Word Write Word Write Word12 Write Word Write Byte Write Word Write Word Write Byte Write Word Write Word Write Byte Write Word Write Word Write Byte Write Word Write Word Write Word Write Byte Write Word Write Word Write Word12 Write Word12 Write Word12 Write Word12 Write Byte Write Word Write Byte Write Byte Write Byte Write Byte Write Byte N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Block Write* Block Write* Block Write* Block Write* N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Block Write Read Byte Read Byte N/A Read Byte N/A N/A N/A N/A Read Byte Read Byte Read Word Read Word Read Word Read Word Read Byte Read Word Read Word Read Byte Read Word Read Word Read Byte Read Word Read Word Read Byte Read Word Read Word Read Word Read Byte Read Word Read Word Read Word Read Word Read Word Read Word Read Byte Read Word Read Byte Read Byte Read Byte Read Byte Read Byte Read Word Read Word Read Word Read Word Read Word* Read Word Read Word Read Word Read Byte Block Read Block Read Block Read Block Read Block Read Read Word Read Word Read Word Read Word Read Word Read Word Read Word Read Word Read Word Read Word Block Read 1 1 0 1 0 0 0 0 1 1 2 2 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 1 2 2 2 2 2 2 1 2 1 1 1 1 1 2 2 2 2 2 2 2 2 1 22