MMBT489LT1G

MMBT489LT1G High Current Surface Mount NPN Silicon Switching Transistor for Load Management in Portable Applications Features • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS www.onsemi.com 30 VOLTS, 2.0 AMPERES NPN TRANSISTOR Compliant COLLECTOR 3 MAXIMUM RATINGS (TA = 25°C) Symbol Max Unit Collector-Emitter Voltage VCEO 30 Vdc Collector-Base Voltage VCBO 50 Vdc Emitter-Base Voltage VEBO 5.0 Vdc IC 1.0 A ICM 2.0 A Rating Collector Current − Continuous Collector Current − Peak 1 BASE 2 EMITTER 3 SOT−23 (TO−236) CASE 318 STYLE 6 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation (Note 1) @TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient (Note 1) Total Device Dissipation (Note 2) @TA = 25°C Derate above 25°C Symbol Max Unit 2 PD RqJA 1 310 2.5 mW mW/°C 403 °C/W 710 5.7 mW mW/°C MARKING DIAGRAM N3 M G G PD Thermal Resistance, Junction−to−Ambient (Note 2) RqJA 176 °C/W Total Device Dissipation (Single Pulse < 10 s) PDsingle 575 mW Junction and Storage Temperature Range TJ, Tstg −55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR− 4 @ Minimum Pad 2. FR− 4 @ 1.0 X 1.0 inch Pad 1 N3 = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping† MMBT489LT1G SOT−23 (Pb−Free) 3000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2001 October, 2016 − Rev. 6 1 Publication Order Number: MMBT489LT1/D MMBT489LT1G ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max 30 − 50 − 5.0 − − 0.1 − 0.1 − 0.1 300 300 200 − 900 − − − − 0.200 0.125 0.075 − 1.1 − 1.1 100 − − 15 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0) V(BR)CEO Collector− Base Breakdown Voltage (IC = 0.1 mAdc, IE = 0) V(BR)CBO Emitter −Base Breakdown Voltage (IE = 0.1 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = 30 Vdc, IE = 0) ICBO Collector−Emitter Cutoff Current (VCES = 30 Vdc) ICES Emitter Cutoff Current (VEB = 4.0 Vdc) IEBO Vdc Vdc Vdc mAdc mAdc mAdc ON CHARACTERISTICS hFE DC Current Gain (Note 3) (IC = 50 mA, VCE = 5.0 V) (IC = 0.5 A, VCE = 5.0 V) (IC = 1.0 A, VCE = 5.0 V) Collector −Emitter Saturation Voltage (Note 3) (IC = 1.0 A, IB = 100 mA) (IC = 0.5 A, IB = 50 mA) (IC = 0.1 A, IB = 1.0 mA) VCE(sat) Base −Emitter Saturation Voltage (Note 3) (IC = 1.0 A, IB = 0.1 A) VBE(sat) Base −Emitter Turn−on Voltage (Note 3) (IC = 1.0 mA, VCE = 2.0 V) VBE(on) Cutoff Frequency (IC = 100 mA, VCE = 5.0 V, f = 100 MHz V V V fT Output Capacitance (f = 1.0 MHz) MHz Cobo pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle ≤ 2% 1.0 1.0 0.9 0.8 0.7 0.8 0.7 IC = 1 A 0.6 VCE (V) VCE (V) 0.9 IC = 2 A 0.5 0.4 0.3 0 0.5 Ic/Ib = 100 0.4 0.3 IC = 500 mA 0.2 0.1 0.6 0.1 IC = 100 mA 0.001 Ic/Ib = 10 0.2 0.01 Ib (A) 0.1 0 0.2 0.001 0.01 0.1 Ic (A) Figure 1. VCE versus Ib Figure 2. VCE versus Ic www.onsemi.com 2 1 2 MMBT489LT1G 800 1.2 VCE = 5 V 700 VCE = 5 V +125°C 1.0 600 400 300 −55°C 0.8 +25°C VBE(on) (V) hFE 500 −55°C +25°C 0.6 0.4 +125°C 200 0.2 100 0 0.001 0.01 0.1 1 0 2 0.001 0.01 Ic (A) Figure 3. hFE versus Ic 1 IC COLLECTOR CURRENT (A) 10 1.0 Ic/Ib = 10 0.8 Ic/Ib = 100 0.6 0.4 0.2 1 1 ms 10 ms 100 ms 0.1 1s SINGLE PULSE Tamb = 25°C 0 2 Figure 4. VBE(on) versus Ic 1.2 VBE (V) 0.1 Ic (A) 0.001 0.01 0.1 1 0.01 2 0.1 1 Ic (A) 0.2 100 VCE (V) Figure 5. VBE(sat) versus Ic 0.5 dc 10 Figure 6. Safe Operating Area 0.1 1.0E+00 0.05 0.02 D = 0.01 Rthja , (t) 1.0E-01 1.0E-02 r(t) 1.0E-03 1E-05 0.0001 0.001 0.01 0.1 t, TIME (sec) 1.0 Figure 7. Normalized Thermal Response www.onsemi.com 3 10 100 1000 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AS DATE 30 JAN 2018 SCALE 4:1 D 0.25 3 E 1 2 T HE NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW SEE VIEW C c MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0° MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 −−− 10 ° MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0° INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 −−− MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10° GENERIC MARKING DIAGRAM* END VIEW RECOMMENDED SOLDERING FOOTPRINT XXXMG G 1 3X 2.90 3X XXX = Specific Device Code M = Date Code G = Pb−Free Package 0.90 *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS STYLE 1 THRU 5: CANCELLED STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 7: PIN 1. EMITTER 2. BASE 3. COLLECTOR STYLE 9: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 10: PIN 1. DRAIN 2. SOURCE 3. GATE STYLE 11: STYLE 12: PIN 1. ANODE PIN 1. CATHODE 2. CATHODE 2. CATHODE 3. CATHODE−ANODE 3. ANODE STYLE 15: PIN 1. GATE 2. CATHODE 3. ANODE STYLE 16: PIN 1. ANODE 2. CATHODE 3. CATHODE STYLE 17: PIN 1. NO CONNECTION 2. ANODE 3. CATHODE STYLE 18: STYLE 19: STYLE 20: PIN 1. NO CONNECTION PIN 1. CATHODE PIN 1. CATHODE 2. CATHODE 2. ANODE 2. ANODE 3. GATE 3. ANODE 3. CATHODE−ANODE STYLE 21: PIN 1. GATE 2. SOURCE 3. DRAIN STYLE 22: PIN 1. RETURN 2. OUTPUT 3. INPUT STYLE 23: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 24: PIN 1. GATE 2. DRAIN 3. SOURCE STYLE 27: PIN 1. CATHODE 2. CATHODE 3. CATHODE STYLE 28: PIN 1. ANODE 2. ANODE 3. ANODE DOCUMENT NUMBER: DESCRIPTION: 98ASB42226B SOT−23 (TO−236) STYLE 8: PIN 1. ANODE 2. NO CONNECTION 3. CATHODE STYLE 13: PIN 1. SOURCE 2. DRAIN 3. GATE STYLE 25: PIN 1. ANODE 2. CATHODE 3. GATE STYLE 14: PIN 1. CATHODE 2. GATE 3. ANODE STYLE 26: PIN 1. CATHODE 2. ANODE 3. NO CONNECTION Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative