MPDRX301S

MPDRX301S/MPDRX302S DATA Sheet 1 DC-DC Converter DATA Sheet MPDRX301S/MPDRX302S 1. Features ･Ultra high-speed response is realized by using original ripple detecting control. ･Up to 13A output current, non-isolated POL. ･Wide adjustable output voltage range by connecting external resistance (0.8V to 3.63V). o o ･Wide operating temperature(-40 C to +85 C). ･UVLO function, ON/OFF function, Output voltage sense function, Over-current function and, PowerGood signal output function are built in. Product line up Output Voltage 1.6~3.63V MPDRX301S 0.8~1.65V MPDRX302S 2. Appearance, Dimensions 21.7±0.2 16 21.9±0.2 P P P=2.54 ±0.2mm Tolerance is not accumulated. P P P P P P ②③ □□ P ① S□ P P P P P M 1 8 9 4.2max. [unit：mm] Marking (1) Pin No.1 Marking (2) Parts No. / MFG ID S□ ① ① P：MPDRX301S Q：MPDRX302S (3) Lot No. □□ ②③ ②Production Year ③Production Month（1,2,3,…9,O,N,D） Flux may expand on PCB and attach onto the area where the marking is printed with laser. In the case the marking become darker in color since flux is unreflecting. It may be a little hard to read, however, the marking is not deleated nor blurred. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 2 Pin Number and Function Pin No. Symbol 1 SENSE 2,3 Vout 4,5,11,12 GND 8, FT 7, VAR 9,10 Vin 6, SS 14 N.C. 15 POW-GOOD1 16 POW-GOOD2 13 ON/OFF Function Output voltage sense Output GND Output trim Output voltage adjustment Input Soft start This pin must be left open. Power Good Power Good Remote ON/OFF 3. Block Diagram 9,10 Vout Vin 2,3 SENSE 1 11,12 13 14 15 16 GND GND ON/OFF N.C. 4,5 VAR 7 Control Unit FT PG1 SS PG2 8 6 4. Environmental Conditions 4.1. Operating Temperature Range 4.2. Storage Temperature Range 4.3. Operating Humidity Range 4.4. Storage Humidity Range -40°C ~ +85°C -40°C ~ +85°C 20% ~ 85% (No water condenses in any cases.) 10% ~ 95% (No water condenses in any cases.) 5. Absolute Maximum Rating Item Minimum Input Voltage Continuous Maximum Input Voltage Time POW-GOOD Pin Voltage 10ms ON/OFF Pin Voltage Maximum POW-GOOD Sink Current Unit V V V V mA Absolute Rating 0 13.2 14 7 15 Remarks Voltage slew rate 1.0V/10μs However, below Vin Total of PG1 and PG2 ※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to this product. If you apply any voltage over this limit the product characteristics will deteriorate or the product itself will be destroyed. Even though it may continue operating for a while after the over-voltage event, its life will likely be shortened significantly. Reliability and life of the module may degrade similarly if the maximum operating voltage rating is continuously exceeded. This product is designed to operate within the maximum operating voltage rating specification. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 3 6. Characteristics o 6. 1. Electrical Characteristics (Ta=25 C) (1) MPDRX301S Value Item Condition Symbol Unit Min. Typ. Max. 6.2 9.6 13.2 V Input Voltage Range Vin Rising UVLO Threshold UVLOr Vin Increasing - 5.25 - V Falling UVLO Threshold UVLOf Vin Decreasing - 5.0 - V Output Voltage Adjustable Range Vout 1.6 - 3.63 V -2.0 - +2.0 %Vo 0 - 13 A - 20 50 mV(pp) Vout=3.3V - 91 - Vout=2.5V - 88 - Vout=1.8V - 86 - Vin =9.6V, Vout=3.3V - 750 - Vin =9.6V, Vout=1.8V - 550 - PWGL Power Good low threshold - 0.87Vo - PWGH Power Good high threshold - 1.13Vo - Output Voltage Tolerance Vo tol Output Current Iout Ripple Voltage Vrpl Efficiency Operating Frequency EFF FT=Short Over Vin, Io, Temperature Range Vin=6.2～13.2V Rset=1% tolerance, FT=Short See the thermal derating curve in section 6.2. Vout =3.3V, Iout=0～13A BW=20MHz, Cout=100µF Vin =9.6V, Iout=10A Frq % kHz V Power Good ON/OFF pin High Voltage VIH ON/OFF pin Low Voltage VIL Short Circuit Protection SCP External Input Capacitor Cin External Output Capacitor Cout Ramp Rate Tr Rising Overshoot Vover Startup Delay Td RC Startup Delay Trcd ON/OFF pin is pulled up to Vin inside of the DC-DC converter. If ON/OFF pin is left open the DC-DC converter shall be “ON”. This pin will be pulled down to GND inside the DC-DC converter when UVLO events occur. Please do NOT connect this pin to power supply with low impedance line, so as not to damage the converter. If ON/OFF pin is connected to GND, the DC-DC Converter OFF 0 1.0 V shall be “OFF”. If output is shorted to GND, DC-DC converter will shut down. After reject the 13 23 A abnormal mode , DC-DC converter will restart by re-inputting Vin or toggling ON/OFF pin. When input voltage is ideal voltage 20 5000 µF source When input voltage is ideal voltage source 100 - 1000 µF 1 2 5 msec - 0 +10 % ON/OFF High : Vin Low→ High Vo=10%, SS= Open 0.1 0.5 2 msec Vin High : ON/OFF Low → High/Open Vo=10% 0.1 0.4 2 msec Vo=10%～90%, SS=Open Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 4 (2) MPDRX302S Value Item Condition Symbol Unit Min. Typ. Max. 6.2 9.6 13.2 V Input Voltage Range Vin Rising UVLO Threshold UVLOr Vin Increasing - 5.25 - V Falling UVLO Threshold UVLOf Vin Decreasing - 5.0 - V Output Voltage Adjustable Range FT=Open 0.8 - 0.95 Vout FT=Short 0.95 - 1.65 Output Voltage Tolerance Vo tol -2.0 - +2.0 %Vo Output Current Iout 0 - 13 A Ripple Voltage Vrpl - 15 50 mV(pp) Vout=1.5V - 85 - Vout=1.2V - 83 - Vout=0.8V - 79 - Vin =9.6V, Vout=1.5V - 650 - Vin =9.6V, Vout=0.8V - 450 - PWGL Power Good low threshold - 0.87Vo - PWGH Power Good high threshold - 1.13Vo - Efficiency Operating Frequency EFF V Over Vin, Io, Temperature Range Vin=6.2～13.2V Rset=1% tolerance See the thermal derating curve in section 6.2. Vout =1.65V, Iout=0～13A BW=20MHz, Cout=100µF Vin =9.6V, Iout=10A Frq % kHz V Power Good ON/OFF pin High Voltage VIH ON/OFF pin Low Voltage VIL Short Circuit Protection SCP External Input Capacitor Cin External Output Capacitor Cout Ramp Rate Tr Rising Overshoot Vover Startup Delay Td ON/OFF Startup Delay Trcd ON/OFF pin is pulled up to Vin inside of the DC-DC converter. If ON/OFF pin is left open, the DC-DC converter shall be “ON”. This pin will be pulled down to GND inside the DC-DC converter when UVLO events occur. Please do NOT connect this pin to power supply with low impedance line, so as not to damage the converter. If ON/OFF pin is connected to GND, the DC-DC Converter OFF 0 1.0 V shall be “OFF”. If output is shorted to GND, DC-DC converter will shut down. After reject the abnormal mode , DC-DC converter will 13 23 A restart by re-inputting Vin or toggling ON/OFF pin. When input voltage is ideal voltage 20 5000 µF source When input voltage is ideal voltage source 100 - 1000 µF 1 2 5 msec - 0 +10 % ON/OFF High : Vin Low→ High Vo=10%, SS= Open 0.1 0.5 2 msec Vin High : ON/OFF Low → High/Open Vo=10% 0.1 0.4 2 msec Vo=10%～90%, SS=Open Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 5 6. 2 Thermal Derating MPDRX301S (Vin=6.2～12V、Vout=1.6～3.63V､ Air Flow：0～3.0ｍ/ｓ) 14 14 12 12 8 0.2m/s 6 0m/s 4 2 3.0m/s 2.0m/s 1.5m/s 1.0m/s 0.2m/s 0m/s 10 I o u t［ A ］ 3.0m/s 2.0m/s 1.5m/s 1.0m/s 10 Iout［A］ MPDRX302S (Vin=6.2～12V、Vout=0.8～1.65V､ Air Flow：0～3.0ｍ/ｓ) 8 6 4 2 0 20 30 40 50 60 Ta[℃] 70 80 85 0 20 30 40 60 50 Ta[℃] 70 80 85 The above derating limits apply to this product soldered directly to 101.6*180mm*1.6mm PCB (6 layer). Any adjacent parts of high temperature may cause overheating. For reliable operation, please ensure that the FET temperature of this product is maintained below 120°C and the inductor temperature is below 111°C. Coil Measurement Point MOSFET Measurement Point Thermal shut down measurement point M 1pin Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 6 7. Operation in information 7.1. Adjusting the Output Voltage The output voltage can be adjusted by connecting resistors between VAR-pin(7Pin) to GND-pin. The following equation gives the required external-resistor value to adjust the output voltage to Vo-adj. It is highly recommended that evaluation of the characteristics of this DC-DC converter’s operation under your board conditions be thoroughly conducted. In case output voltage is used more than 0.95V, please connect FT-pin(8pin) to GND. Internal Circuit ①MPDRX301S MPDRX301S Vout MPDRX302S 5440 RVAR＝ －1800 [Ω] Vo-adj[V]×1.002－1.5[V] 6.8 kΩ RVAR pin (FT-pin： SHORT to GND) 301S：1.8 kΩ 302S：5.1kΩ ②MPDRX302S (a)0.8≦ Vout ＜0.95V (FT-pin：OPEN) Error amp RVAR＝ FT pin 5440 －5100 [Ω] Vo-adj[V]×1.002－0.8[V] (b)0.95≦ Vout1.65V (FT-pin：SHORT to GND) RVAR＝ 5440 －5100 [Ω] Vo-adj[V]×1.002－0.95[V] ①MPDRX301S Voadj [V] 3.63 3.3 2.5 1.8 1.6 Calculated RVAR[Ω] 745 1211 3613 16118 50913 FT pin(8pin) Short to GND Short to GND Short to GND Short to GND Short to GND ②MPDRX302S Voadj [V] 1.65 1.5 1.2 1.0 0.95 0.9 0.8 Calculated RVAR[Ω] 2635 4737 16453 99515 2858058 48338 3394900 FT pin(8pin) Short to GND Short to GND Short to GND Short to GND Short to GND Open Open 7.2. Thermal shutdown This DC-DC converter thermally shuts down when temperature of a control IC reaches to 180℃ typically. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 7 7.3. Power Good Powergood signal will be changed within the value of clause 6.1. (Open-drain output) Output voltage is within voltage detection threshold: POW-GOOD is open. Output Voltage is out of voltage detection threshold : POW-GOOD is connected to GND. Hysteresis：2.5％Vo(TYP) Mask time：50μｓ~(TYP) P.G.1 P.G.2 P.G　logic Control Circuit 7.4. Output Voltage Sensing By connecting the SENSE-pin to the load, the output voltage drop due to the PCB wiring may be compensated for. Vout MPDRX30*S SENSE Load GND Please do NOT connect SENSE-pin to the output of LC filter that is set to the Vout line. When using this way, this product will not operate properly. Vout MPDRX30*S SENSE Load GND ※Caution Please connect SENSE-pin to Vout-pin nearby the product, if sense function is not used. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 8 7.5. Soft start function By using the soft start function, ramp-rate of the output-starting is adjustable. Adjustment range of ramp-rate is from 2 to 10ms. Ramp rate is adjusted by external capacitor between SS-pin(6pin) and GND. MPDRX30*S SS Css GND The equation of starting time about output voltage. （Css+1.2×10-8）×0.8 Starting time：Td＝ +2×10-4 [s] 5×10-6 Css：The capacitance of external capacitor.(F) 7.6. ON/OFF Control ON/OFF function Using the ON/OFF feature, the operation of this product can be disabled without removal of the input voltage. Vin Inner Circuit 100ｋΩ（TYP) ON/OFF UVLO To ON/OFFterminal of IC Recommende ON/OFF control method. ON/OFF Control Operation When ON/OFF-pin(13pin) is left open When ON/OFF-pin(13pin) is connected to GND MPDRX30*S 13 4,5,11,12 example GND ON/OFF or …… …… Output Voltage =ON Output Voltage=OFF Caution ON/OFF pin is pulled up inside of the DC-DC converter, so voltage appears up to 7V at ON/OFF pin. ON/OFF pin will be pulled down to GND inside the DC-DC converter when UVLO events occur. Please do NOT connect this pin to power supply, so as not to damage the converter. ON/OFF pin of MPDRX301S/302S/303S/304S can be connected each other. The maximum number is up to 20pcs. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 9 7.7. Reset Condition In order to reset all function, the input Voltage is set under 0.5V for Min.100 m second or ON/OFF pin voltage is set under 1.0V for Min 10m second. Input Voltage 6.2～ 13.2V Reset Condition Max. 0.5V Min. 100 ms ON/OFF Pin Voltage 5.0V(TYP) Max. 1.0V Min. 10 ms 7.8. Input External capacitor It is recommended to connect a low-impedance electrolytic capacitor of 20μF or more at Vin terminal. Smaller input capacitor may leads to an unstable operation of this product caused by input voltage fluctuation. Please check the proper operation of it on your product when smaller input capacitor is used. Using ceramic capacitors as input capacitor may cause an increase of output voltage, because input ripple current flows through the external input capacitor and wiring resistance. This phenomenon is affected by the position of external capacitors, the value of external capacitors and voltage difference between Vin and Vout. Using low-impedance electrolytic capacitor will ease this problem. Please check the proper operation of it on your product when ceramic input capacitor is used. MPDRX30*S Vin Cin Vout Ripple current Rw×Irpl appears as additional output ripple voltage. Rw Wiring resistance 7.9. Output External capacitor Ceramic capacitors are recommended as output external capacitor. Using ceramic capacitors, small output variation and small ripple voltage are realized. Output capacitor should be within 100μF to 1000μF. Output capacitor shall be placed near the output terminal. When using plural capacitors, please make sure to place a capacitor of at least 100μF near the output terminal, and place other capacitors near the load. When using LC output filter, please make sure to place a capacitor of at least 100μF near the output terminal. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 10 8. Reliability 8.1. Humidity Test According to JIS-C-0022. 40土2℃, 90 to 95%RH, 100 hours. Leave for 4 hours at room temperature. No damage in appearance and no deviation from electrical characteristics (section 6.1). 8.2. Temperature Cycles Test Repeat cycle 5 times. Leave 2 hours at room temp. No damage in appearance and no deviation from electrical characteristics (section 6.1). Step Condition Time 1 -40℃±3℃ 30 minutes 2 Room Temp. 5～10 minutes 3 +85℃±2℃ 30 minutes 4 Room Temp. 5～10 minutes 8.3. Vibration Test 10 to 55Hz, 1.5mm amplitude (frequency, 1minuit) 1 hour for each of X, Y, Z directions. No damage in appearance and no deviation from electrical characteristics (section 6.1). 8.4. Mechanical Shock Test 20G, 1 time for each X, Y, Z directions. No damage in appearance and no deviation from electrical characteristics (section 6.1). Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 11 9. Test Circuit In the following test circuit, the initial values under item 6.1 should be met. 9.1. General Measure Circuit 1 SENSE 9,10 Vin 13 ON/OFF 2,3 Vout MPDRX30*S SS 6 14 NC VAR 7 15 PG1 FT 8 16 PG2 C1, C2 Open = ON Short = OFF RVAR C3 RL GND 4,5,11,12 Open: Vo < 0.95V Short: Vo ≧0.95V C1,C2：10µF／25V（Ceramic Capacitor） C3：100µF／6.3V （Ceramic Capacitor） ※Please make sure to place C1,C2 and C3 nearby input and output terminal of DC-DC converter. 9.2. Ripple Voltage Measurement Circuit Coaxial cable :1.5D-2V, L=1.5m Vout Oscilloscope BW：20MHz DC-DC Converter GND Ceramic Capacitor 100µF Terminator （Keisokugiken TRC-50F) Equivalent circuit R：50Ω C：0.01µF A: Output Ripple Voltage&Noise B: Output Ripple Voltage B A C: Switching Period C Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 12 10. Mounting Condition 10. 1. PCB Land Pattern Recommendation 1pin 10.0 8.0 1.8 1.0 2.06 2.54 1.5 There are wiring coppers or through-hole via at the bottom side of the DC-DC converter.When you design your PCBs, please be careful not to short the circuit of the DC-DC converter or PCBs. 10. 2. Recommended Soldering Conditions Reflow Soldering This product is RoHS compliant. The following profile is recommended for the reflow of this product using Pb-free solder paste (Sn-Ag-Cu). Method : Full convection reflow soldering Reflow Soldering Profile JEDEC IPC/JEDEC J-STD-020D Table 5-2 Classification Reflow Profile Pb-Free Assembly Large Body Profile details Soldering temperature Soldering time Heating time Preheating time Programming rate Descending rate Total soldering time Times : : : : : : : : 245ºC+0/-5ºC 30 seconds, 240 to 245ºC 60 to 150 seconds, over217ºC 60 to 120 seconds,150 to 200ºC 3ºC/ sec. Max., 217 to 245ºC 6ºC/ sec. Max. 8 minutes Max., 25 to 245ºC 1 time 2 4 5o C 217 oC Parts surface temperature [ºC] 200 oC 60～150 (seconds) 1 5 0 oC 60～120 (seconds) Times ※Do not vibrate for the products on reflow. Please need to take care temperature control because mounted parts may come off if the product are left under the high temperature. Do not reflow DC-DC converter as follows, because DC-DC converter may fall down from a substrate during reflowing. Substrate Note: DC-DCConverter 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 13 11. Packaging Specification 11.1. Tray Dimensions DC-DC converters are put in the trays. (See Fig.1) Unit: mm General Tence: ±1.5mm Fig.1 Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 14 11. 2. Contained pieces of products per corrugated box. Maximum Contained products pieces 324 pcs/corrugated box. Further plural sheets of corrugated cardboard are placed on the top of the dummy tray according to number of contained trays in order to full up the space in a corrugated box. 11. 3. Packaging Form Trays with products are lidded and packed in a corrugated box. (See Fig.2) Corruted cardboard Dummy tray Tray Containning products 9 tray max. Corrugated cardboard （330） （68）  MURATA PRODUCTS （155） Lebel Corrugated box Dimension [unit : mm]of Corrad box is reference only. Fig.2 Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 15 12. Typical Characteristics Data 12. 1. Load Transient Response Our original ripple-detective control method achieves much better load transient responses. Vin=9.6V, Vo=2.5V(MPDRX301S,Fig. 11-1a) , 1.2V(MPDRX302S,Fig. 11-1b) Io=0A ->5A, di/dt=10A/us, Cout=100uF(Ceramic), Ta=25 oC Vout 20mV/div 10us/div Vout 20mV/div 10us/div Iout Iout Fig. 12-1a. Load Transient Response (MPDRX301S) Fig. 12-1b.Load Transient Response (MPDRX302S) 12. 2. Output Impedance characteristics Our original ripple-detective control method achieves very low output impedance in wide frequency range. Conventional PMW Product's Output Impedance RX301S/302S Output Impedance 100 40 80 30 Zo [mohm] Zo[mOhm] 50 20 10 60 40 20 0 0.1 1 10 100 Frquency[kHz] Fig. 12-2-1. Output Impedance of MPDRX301S/302S 0 0.01 0.1 1 10 100 Frequency [kHz] Fig. 12-2-2. Output Impedance of conventional product Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 16 12. 3. Other electrical characteristics 12. 3. 1. Vout=3.3V (MPDRX301S) o （Ta=25 C, Cin= GRM32DR71E106KA12L×2, Cout= GRM32EB30J107ME16, RVAR=1211Ω） Efficiency 3.399 95 3.366 92 Efficiency（％） Vout（V） Load　Reguration 3.333 3.300 3.267 89 86 83 3.234 3.201 80 0 2 4 6 8 10 12 14 0 2 4 Iout（Ａ） Vin：5.6V 6 8 10 12 14 Iout（Ａ） Vin：14V Vin：9.6V Vin：5.6V Fig. 12-3-1. Output Voltage v.s. Output Current Vin：9.6V Vin：14V Fig. 12-3-2. Efficiency v.s. Output Current Ripple noise voltage Ripple noise voltage (mVp-p) 25 20 15 10 5 0 0 2 4 6 8 10 12 14 Iout（Ａ） Vin：5.6V Vin：9.6V Vin：14V Fig. 12-3-3. Ripple Voltage v. s. Output Current Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 17 12. 3. 2. Vout=2.5V (MPDRX301S) o （Ta=25 C, GRM32DR71E106KA12L×2, Cout= GRM32EB30J107ME16L, RVAR=13613Ω） Efficiency 2.575 95 2.550 92 Efficiency（％） Vout（V） Load　Reguration 2.525 2.500 2.475 89 86 83 2.450 2.425 80 0 2 4 6 8 10 12 14 0 2 4 Iout（Ａ） Vin：5.6V 6 8 10 12 14 Iout（Ａ） Vin：9.6V Vin：14V Vin：5.6V Fig. 12-3-4. Output Voltage v.s. Output Current Vin：9.6V Vin：14V Fig. 12-3-5. Efficiency v.s. Output Current Ripple noise voltage Ripple noise voltage (mVp-p) 25 20 15 10 5 0 0 2 4 6 8 10 12 14 Iout（Ａ） Vin：5.6V Vin：9.6V Vin：14V Fig. 12-3-6. Ripple Voltage v.s. Output Current Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 18 12. 3. 3. Vout=1.8V (MPDRX301S) o （Ta=25 C, GRM32DR71E106KA12L×2, Cout= GRM32EB30J107ME16L, RVAR=16118Ω） Efficiency 1.854 95 1.836 92 Efficiency（％） Vout（V） Load　Reguration 1.818 1.800 1.782 89 86 83 1.764 80 1.746 0 2 4 6 8 10 12 14 0 2 4 Vin：9.6V 8 10 12 14 Iout（Ａ） Iout（Ａ） Vin：5.6V 6 Vin：5.6V Vin：14V Fig. 12-3-7. Output Voltage v.s. Output Current Vin：9.6V Vin：14V Fig. 12-3-8. Efficiency v.s. Output Current Ripple noise voltage Ripple noise voltage (mVp-p) 25 20 15 10 5 0 0 2 4 6 8 10 12 14 Iout（Ａ） Vin：5.6V Vin：9.6V Vin：14V Fig. 12-3-9. Ripple Voltage v.s. Output Current Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 19 12. 3. 4. Vout=1.5V (MPDRX302S) o （Ta=25 C, GRM32DR71E106KA12L×2, Cout= GRM32EB30J107ME16L, RVAR=4737Ω） Efficiency 1.545 90 1.530 87 Efficiency（％） Vout（V） Load　Reguration 1.515 1.500 1.485 84 81 78 1.470 1.455 75 0 2 8 6 4 10 12 14 0 2 4 8 10 12 14 Iout（Ａ） Iout（Ａ） Vin：5.6V 6 Vin：9.6V Vin：5.6V Vin：14V Fig. 12-3-10. Output Voltage v.s. Output Current Vin：9.6V Vin：14V Fig. 12-3-11. Efficiency v.s. Output Current Ripple noise voltage Ripple noise voltage (mVp-p) 25 20 15 10 5 0 0 2 4 8 6 10 12 14 Iout（Ａ） Vin：5.6V Vin：9.6V Vin：14V Fig. 12-3-12. Ripple Voltage v.s. Output Current Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 20 12. 3. 5. Vout=1.2V (MPDRX302S) o （Ta=25 C, GRM32DR71E106KA12L×2, Cout= GRM32EB30J107ME16L, RVAR=16453Ω） Efficiency 1.236 90 1.224 87 Efficiency（％） Vout（V） Load　Reguration 1.212 1.200 1.188 84 81 78 1.176 1.164 75 0 2 4 6 8 10 12 14 0 2 4 Iout（Ａ） Vin：5.6V 6 8 10 12 14 Iout（Ａ） Vin：9.6V Vin：14V Vin：5.6V Fig. 12-3-13. Output Voltage v.s. Output Current Vin：9.6V Vin：14V Fig. 12-3-14. Efficiency v.s. Output Current Ripple noise voltage Ripple noise voltage (mVp-p) 25 20 15 10 5 0 0 2 4 6 8 10 12 14 Iout（Ａ） Vin：5.6V Vin：9.6V Vin：14V Fig. 12-3-15. Ripple Voltage v.s. Output Current Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 21 12. 3. 6. Vout=0.8V (MPDRX302S) o （Ta=25 C, GRM32DR71E106KA12L×2, Cout= GRM32EB30J107ME16L, RVAR=3394900Ω） Efficiency 0.824 90 0.816 87 Efficiency（％） Vout（V） Load　Reguration 0.808 0.800 0.792 84 81 78 0.784 0.776 75 0 2 4 6 8 10 12 14 0 2 4 Iout（Ａ） Vin：5.6V 6 8 10 12 14 Iout（Ａ） Vin：9.6V Vin：14V Vin：5.6V Fig. 12-3-16. Output Voltage v.s. Output Current Vin：9.6V Vin：14V Fig. 12-3-17. Efficiency v.s. Output Current Ripple noise voltage Ripple noise voltage (mVp-p) 25 20 15 10 5 0 0 2 4 6 8 10 12 14 Iout（Ａ） Vin：5.6V Vin：9.6V Vin：14V Fig. 12-3-18. Ripple Voltage v.s. Output Current Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 22 13. Notice 13.1. Please do not use a connector or a socket for connection with your board of this product. Electrical performance may be deteriorated the influence of contact resistance. Please be sure to mount this product with solder. 13.2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 13.3. Input / Output capacitor When a inductance or a switch devise are connected to the input line, or when you use a power supply with output inductance as the input voltage source, the input voltage of the DC-DC converter will be fluctuated. By this input voltage fluctuation, the transient load response of the DC-DC converter may be deteriorated or abnormal oscillation may occur. So please confirm normal operation on each application. Please use external input capacitor in order to decrease inductance of input line. 13. 4. Wiring of input / output capacitor In the case of input / output capacitor connection, in order to reduce electrical noise, please design PCBs with consideration of the following item. ①.Please be sure to check normal operation on your system. ②.Please use low impedance capacitors with good high frequency characteristic. ③.Please shorten those leads of each capacitor as much as possible, and make sure the lead Inductance low. ④.Both input-side and output side, please make the wiring loop between plus and minus as small as possible.The influence of leakage inductance can be reduced. ⑤.Please design the print pattern of the main circuit as wide and short as possible. Make wiring roop small Make wiring roop small +Vin +Vin +Vout +Vout DC-DC Converter +Vin Load -Vin GND C1 C2 shorten the leads and pattern shorten the leads and pattern 13.5. This product should not be operated in parallel or in series. 13.6. Inrush current protection is not a feature of this product. Please be careful that surge voltage caused by wiring indcutance etc. may make the product damage when input voltage is applied suddenly to the product. 13.7. Please connect the input terminal with proper polarity. If you connect wrong polarity, the DC-DC Converter may be broken. In the case of the DC-DC Converter is damaged, abnormal input current may flow in, and abnormal overheat of the DC-DC Converter, or some damage of your products may occur. Please use a diode and a fuse to as following figure. fuse + + IN OUT - - + Load diode ※Please select diode and fuse after confirming the operation. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 23 13.8. Cleaning Please use no-cleaning type flux and do not wash this product. 13.9. Storage 13.9.1. Please store the products in room where the temperature/humidity is stable and direct sunlight cannot come in, and use the products within 6 months after delivery. Please avoid damp and heat or such places where the temperature greatly changes, as water may condense on this product, and the quality of characteristics may be reduced, and/or be the solderability may be degraded. If this product needs to be stored for a long time (more than 1 year), this product may be degraded in solderability and/or corroded. Please test the solderability of this product regularly. Baking before reflow process is unnecessary to store the products under 30℃,60%RH or less up to 6 months. In case the storage condition is over above mentioned, if these are unpacked condition, please bake them at 125℃±5℃/24hour. If these are packed in a tape, please bake them before soldering at 60℃±5℃/168hour. 13.9.2. Please do not store this product in places such as : A dusty place, a place exposed directly to sea breeze, or in an atmosphere containing corrosive gas (Cl2,NH3,SO2,NOX and so on). 13.10. Operational Environment and Operational Conditions 13.10.1. Operational Environment The products are not waterproof, chemical-proof or rust-proof. In order to prevent leakage of electricity and abnormal temperature increase of the products, do not use the products under the following circumstances: (1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on). (2) in a dusty place. (3) in a place exposed to direct sunlight. (4) in such a place where water splashes or in such a humid place where water condenses. (5) in a place exposed to sea breeze. (6) in any other places similar to the above (1)through (5). 13.10.2. Operational Conditions Please use the products within specified values (power supply, temperature, input, output and load condition, and so on). Input voltage drop for line impedance, so please make sure that input voltage is included in specified values. If you use the products over the specified values, it may break the products, reduce the quality, and even if the products can endure the condition for short time, it may cause degradation of the reliability. Also please take care that the external voltage over output voltage of DC-DC Converter does not applies to output of this DC-DC Converter. 13.10.3. Note prior to use If you apply high static electricity, over rated voltage or reverse voltage to the products, it may cause defects in the products or degrade the reliability. Please avoid the following items: (1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC) line. (2) electrostatic discharge by production line and/or operator. (3) electrified product by electrostatic induction. Do not give an excessive mechanical shock. If you drop the products on the floor, etc., it may occur a crack to the core of inductors and monolithic ceramic capacitors. Do not give a strong shock such as a drop in handling. 13.11. Transportation If you transport the products, please pack them so that the package will not be damaged by mechanical vibration or mechanical shock, and please educate and guide a carrier to prevent rough handling. If you transport the products to overseas (in particular, by sea), it is expected that the transportation environment will be the worst, so please pack the products, in the package designed on the consideration of mechanical strength, vibration-resistant and humidity-resistant. The package of the products which Murata sells in Japan, may not resist over seas transport. Please consult us if you are to use the Murata package of the products sold in Japan for transport to overseas. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21 MPDRX301S/MPDRX302S DATA Sheet 24 ! Note 1. Murata recommends that customers ensure that the evaluation and testing of these devices are completed with this product actually assembled on their product. 2. Please contact our main sales office or nearby sales office before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party’s life, body or property or this products for any other applications that described in the above. ①Aircraft equipment ②Aerospace equipment ③Undersea equipment ④Power plant control equipment ⑤Medical equipment ⑥Transportation equipment (vehicles, trains, ships, etc.) ⑦Traffic signal equipment ⑧Disaster prevention /crime prevention equipment ⑨Data-processing equipment ⑩Application of similar complexity and/or reliability requirements to the applications listed in the above. 3. If you have any concerned materials other than RoHS directive, please contact us. 4. About the written contents, since changing without a preliminary announcement for improvement and supply are sometimes stopped, please confirm in case of ordering. If written contents are unknown, please ask to our main sales office or nearby sales office. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2016.7.21