MPDTH05020WAH

MPDTH**020WAS/WAH Short Form 1 DC-DC Converter Short Form MPDTH**020WAS/WAH (22A output POL-Alliance product) ■ Features ・Point-of-Load Alliance product ・Up to 22A output current ・Wide-Output Voltage Adjust (0.8-5.5V) ・High efficiency up to 95% TYP (@5Vin 3.3V/14Aout) ・Wide Operating Temp - 40 ºC to + 85 ºC ・Open frame TH or SMT termination ・Auto-Track TM Sequencing ・Margin Up/Down Controls ・Pre-Biased start-up ・Output Over-Current Protection ・Output Voltage Sense ・ON/OFF Inhibit ・Under-Voltage Lockout ■ Ordering Information Input Voltage Output Voltage Output Current Model Number ――――――――――――――――――――――――――――――――――――――――― 3.0V to 3.6V 4.5V to 5.5V 10.8V to 13.2V OPTIONS: 0.8V to 2.5V 0.8V to 3.6V 1.2V to 5.5V 22A 22A 18A “WAS” -- SMT termination, MPDTH03020WA(S)/(H) MPDTH05020WA(S)/(H) MPDTH12020WA(S)/(H) “WAH” – TH termination ■ Dimensions 37.97 3.18 3.18 1.52 12.70 15.88 10 9 9.75 MAX. Solder Ball φ1.02 10 Places 19.05 22.10 1 1.52 7 8 TOP VIEW 3 2 4 5 6 SIDE VIEW TOP VIEW SMT outline [in (mm)] 37.97 3.18 3.18 1.52 3.55 12.70 15.88 10 9 8 2 3 4 5 φ1.02 10 Places 7 19.05 22.10 1 1.52 Pin No. 1. 2. 3. 4. 5. Signal Pin No. GND 6. Vin 7. Inhibit 8. VoAdjus 9. VoSense 10. Signal Vout GND Track Margin Down Margin Up TOP VIEW TOP VIEW TH outline [in (mm)] Note: 6 Host Board 9.00 MAX. SIDE VIEW 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.9.29 MPDTH**020WAS/WAH Short Form 2 ■ Standard Application Track Margin Margin Down Up 2 10 9 8 1000uF MPDTH**020 + 6 5 RL 4 Vin 3 1 Open =ON R1 7 Short =OFF ■ Output Voltage Adjustment R1 = 10k • 0.8V - 2.49k Vout - 0.8V : MPDTH03020 / 05020 R1 = 10k • 0.8V - 1.82k Vout - 1.2V : MPDTH12020 ■ General Specifications Item Input voltage Output voltage Symbol （Ta=25ºC） Condition Vin Vout Parts Number 3.3 3.65 MPDTH05020 4.5 5.0 5.5 MPDTH12020 10.8 12.0 13.2 Vin=2.95Vto 3.65V MPDTH03020 0.8 2.5 Vin=4.5V to 5.5V MPDTH05020 0.8 3.6 Vin=10.8Vto13.2V MPDTH12020 1.2 5.5 Rset 1% tolerance, ±100ppm/℃ Output current Iout MPDTH03020, MPDTH05020 MPDTH12020 Efficiency Eff Max. 2.95 Regtot Vrip Typ. MPDTH03020 Total output variation Ripple voltage Min. Unit V V ±3 %Vo 0 22 A 0 18 Vin=3.3V, Vout=2V,Iout=22A 20 Vin=5.0V, Vout=3.3V,Iout=22A 20 Vin=12.0V, Vout=3.3V,Iout=18A 33 Vin=3.3V,Vout=2.5V,Iout=10A 95 Vin=5.0V,Vout=3.3V, Iout=14A 95 Vin=12.0V,Vout=5.0V, Iout=12A 95 mVp-p % Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.9.29 MPDTH**020WAS/WAH Short Form 3 ■ Thermal Derating PTH03020W Safe Operating Area (Vout=2.5V) PTH05020W Safe Operating Area (Vout=3.3V) 90 90 80 80 70 400LFM 60 Ta - °C Ta - °C 70 200LFM 100LFM 50 Nat Conv 200LFM 100LFM 50 40 40 30 30 20 400LFM 60 Nat conv 20 0 2 4 6 8 10 12 14 16 18 20 22 0 2 4 6 8 10 Iout (A) 12 14 16 18 20 22 Iout (A) PTH12020W Safe Operating Area (Vout=5V) 90 80 Ta - °C 70 400LFM 60 200LFM 100LFM 50 Nat conv 40 30 20 0 2 4 6 8 10 12 14 16 18 Iout (A) ■ Conversion Efficiency PTH05020W Efficiency (Vin=5V) 100 Efficiency - % 95 3.3V 90 2.5V 1.8V 85 1.5V 1.2V 80 1.0V 75 70 0 2 4 6 8 10 12 14 16 18 20 22 Iout - Amps Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2006.9.29