P
Ideas for Wireless Solutions
Bluetooth Low Energy Single Mode 4.0
System on chip Module PAN1740
OUTLINES
PAN1740 is the next generation Bluetooth Low Energy Module
from Panasonic with reduced form factor, significantly lower
power consumption and embedded Software Stack. The Singlemode Bluetooth Smart System-on-Chip module is optimized for
low power, small size and low system cost products. It reduces
external component count, development effort and time to market.
M
ODULES
Panasonic
Electronic Devices Europe GmbH
IRELESS
W
The Module is manufactured in a very small 9.0* 9.5* 1.8 mm3
SMD package with shielded case and chip antenna. The power consumption of only 4.9mA in Tx and Rx mode makes the use of coin cell
batteries possible or reduces the needed battery capacity and cost
of existing solution by at least 50%. It is qualified according to Bluetooth 4.0 standard. FCC, IC and CE approvals are under preparation.
The PAN1740 comes with a complete software development platform, which includes a qualified Bluetooth Smart
single-mode stack on chip. Multiple Bluetooth Smart profiles for consumer wellness, sport, fitness, security and proximity applications are supplied as standard, while additional
customer profiles can be developed and added as needed.
FEATURES
General
- Single-mode Bluetooth Smart System-on-Chip
- ARM CORTEX M0 CPU
- Small 9.0 x 9.5 x 1.8 mm SMD package with antenna
- Includes 16MHz and 32.768kHz crystal
- Temperature Range from -40°C to +85°C
- Power consumption 4.9mA Rx and Tx
- Link budget 93dBm (Rx Sensitivity -93, Tx 0 dBm)
Interfaces
- GPIO, UART, SPI, I²C, 3-axis QD, ADC
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation.
Design
and Specifications
arelogos
subject
change
notice. SIG,
Ask the
use. If there is any doubt
he
Bluetooth
word mark and
aretoowned
bywithout
the Bluetooth
Inc.factory for technical specifications before purchase and/or
PAN1740
Rev.Rev.
0.1 0.2
regarding the safety of this product, kindly inform us immediately for technical consultation.
PAN1026 BT4.0
BT2.1/3.0
Hardware Status:
Pre-Production
P
Memory
APPLICATIONS
- Wearable Devices
- Health Care, Medical Diagnostic Systems
- Sports and Leisure Equipment
- Mobile phone accessories
- Industrial Measurement and Diagnosis
- Devices with critical Power Consumption
- 42k SRAM
- 32k OTP Memory for Profiles and Apps (delivered blank)
- 84k ROM for LE Host and Boot ROM
OTP (One Time Programmable).
The PAN1740 is programmed on the customer’s
production line. Optional pre-programming available for
higher volume. Apps and Profiles are copied from OTP,
during start up, and executed in SRAM.
BLOCK DIAGRAM
Crystal
32.768 kHz
DC/DC
Vsupply
Full Port Multiplexer
UART SPI USB I2C
GP-ADC
Quad-Decoder
Wakup-Timer
DA14580
Dialog
Crystal
16 MHz
PAN1740
TECHNICAL CHARACTERISTICS
Parameter
0,1% BER
Receiver Sensitivity (1% PER)
Output Power
Power Supply
Transmit Mode
Receive Mode
Operating Temperature Range
Value
- 93 dBm
0 dBm
2.35 to 3.3 V
4.9 mA
4.9 mA
-40C / +85C
Condition / Note
BER 1%
Maximum setting
Single operation voltage
GFSK
GFSK
Industrial Range
Hardware Status:
Pre-Production
很抱歉,暂时无法提供与“ENW89846AYKF”相匹配的价格&库存,您可以联系我们找货
免费人工找货