S338R

Medium/High Capacity Standard Size Toggles GENERAL SPECIFICATIONS FOR S301 ~ S339 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Series S Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 6,000 operations minimum for S331F; 15,000 operations minimum for all other S331s; 25,000 operations minimum for all others Shown on following tables PBT for flatted lever; brass with chrome plating for all others Brass with chrome plating Melamine phenol Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Brass with silver plating 2.94Nm (26 lb•in) for double nut; 1.47Nm (13 lb•in) for single nut Manual Soldering: See Profile A in Supplement section. Designated with UL recognized symbol beside part numbers on following pages UL File No. WOYR2.E44145. Add “/U” to end of part number to order UL mark on switch. Designated with C-UL recognized symbol beside part numbers on following pages C-UL File No. WOYR8.E44145. Add “/C-UL” to end of part number to order C-UL mark on switch. Designated with CSA certified symbol beside part numbers on following pages File No. 023535-0-000. Add “/C” to end of part number to order CSA mark on switch. Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable & Stationary Contacts: Terminals: Mounting Torque: Soldering Time & Temperature: Installation Standards & Certifications UL Recognized: C-UL Recognized: CSA Certified: SINGLE POLE WITH SOLDER LUG Toggle Position/Connected Terminals ( ) = Momentary Down Model S301 S302 S303 S305 S308 S309 R Electrical Capacity Resistive AC 125V AC 250V DC 30V Center Up Inductive AC 125V PF 0.6 Angle of Throw Approvals R Pole & Throw SPST SPDT SPDT SPDT SPDT SPDT Keyway ON ON ON ON (ON) ON 1-3 2-3 2-3 2-3 2-3 2-3 NONE NONE OFF NONE OFF OFF SPDT OFF ON ON (ON) (ON) (ON) — 2-1 2-1 2-1 2-1 2-1 2 (COM) 15A 15A 15A 15A 15A 15A 6A 6A 6A 6A 6A 6A 20A 20A 20A 20A 20A 20A 10A 10A 10A 8A 8A 8A 32° 32° 32° 32° 32° 32° R R R R — — — — — — SPST Throw & Schematics: 1 3 INTERNAL CONNECTION 3 1 Note: Terminal numbers are actually on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. (3.2) Dia Typ .126 3 Keyway M12 P1 (12.5) Dia .492 (28.5) 1.122 (9.0) .354 (3.0) Dia .118 32° (6.0) Typ .236 (1.6) Typ .063 2 1 (6.1) Dia .240 (16.0) .630 (17.5) .689 (12.0) .472 (17.4) .685 (9.6) Max .378 S301 S301 does not have terminal 2 Maximum Panel Thickness: .185” (4.7mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Medium/High Capacity Standard Size Toggles DOUBLE POLE WITH SOLDER LUG Toggle Position/Connected Terminals ( ) = Momentary Down Model S331 S332 S333 S335 S338 S339 R Series S Inductive Electrical Capacity Resistive AC 125V AC 250V DC 30V α= Angle of Throw Center Up Approvals R Pole & Throw DPST DPDT DPDT DPDT — — DPDT DPDT ON ON ON ON Keyway AC 125V PF 0.6 1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 INTERNAL CONNECTION NONE NONE OFF NONE OFF OFF DPDT 3 OFF ON ON (ON) (ON) (ON) 2 — 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 (COM) 1 6 5 25A 25A 25A 15A 15A 15A 25A 15A 15A 6A 6A 6A 25A 25A 25A 20A 20A 20A 10A 10A 10A 8A 8A 8A 25° 25° 30° 25° 25° 25° R R R R R R R R (ON) ON R R Throw & Schematics: DPST 1 3 4 6 4 Note: Terminal numbers are actually on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 (2.4) Dia Typ .094 6 3 (12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118 α (4.8) Typ .189 5 4 2 1 (6.1) Dia .240 (19.0) .748 (5.7) .224 (17.5) .689 (12.0) .472 (25.1) .988 S331 S331 does not have terminals 2 & 5 Maximum Panel Thickness: .185” (4.7mm) DOUBLE POLE WITH SOLDER LUG & FLATTED LEVER Toggle Position/Connected Terminals ( ) = Momentary Down Model S331R S332R S333R S338R S339R R Electrical Capacity Resistive AC 125V AC 250V DC 30V Center Up Inductive AC 125V PF 0.6 Approvals R Pole & Throw — — — — — DPST DPDT DPDT DPDT DPDT ON ON ON Keyway α= Angle of Throw 1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 INTERNAL CONNECTION NONE NONE OFF OFF OFF DPDT 3 OFF ON ON (ON) (ON) 2 — 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 (COM) 1 6 5 25A 25A 25A 15A 15A 25A 15A 15A 6A 6A 25A 25A 25A 20A 20A 10A 10A 10A 8A 8A 25° 25° 30° 25° 25° R R R R R R (ON) ON R R Throw & Schematics: DPST 1 3 4 6 4 Note: Terminal numbers are actually on the switch • Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 (2.4) Dia Typ .094 6 3 (12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118 α (4.8) Typ .189 5 4 2 1 (4.0) .157 (9.0) .354 (8.15) .321 (27.0) 1.063 (12.0) .472 (25.1) .988 (5.7) .224 (19.0) .748 S331R S331R does not have terminals 2 & 5 Maximum Panel Thickness: .220” (5.6mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Medium/High Capacity Standard Size Toggles SINGLE POLE WITH SCREW LUG Toggle Position/Connected Terminals ( ) = Momentary Down Model S301T S302T S303T S305T S308T S309T Throw & Schematics: R Series S Inductive Electrical Capacity Resistive AC 125V AC 250V DC 30V α= Angle of Throw Center Up Approvals R Pole & Throw SPST SPDT SPDT SPDT SPDT SPDT Keyway AC 125V PF 0.6 ON ON ON ON (ON) ON 1-3 2-3 2-3 2-3 2-3 2-3 NONE NONE OFF NONE OFF OFF SPDT OFF ON ON (ON) (ON) (ON) — 2-1 2-1 2-1 2-1 2-1 2 (COM) 15A 15A 15A 15A 15A 15A 6A 6A 6A 6A 6A 6A 20A 20A 20A 20A 20A 20A 10A 10A 10A 8A 8A 8A 32° 32° 32° 32° 32° 32° R R R R — — — — — — SPST 1 3 INTERNAL CONNECTION 3 1 Note: Terminal numbers are actually on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 M3.5 P0.5 (12.5) Dia .492 32° (6.0) Typ .236 (5.0) Typ .197 (28.5) 1.122 (9.0) .354 (3.0) Dia .118 (6.1) Dia .240 (16.0) .630 (17.5) .689 (12.0) .472 (17.4) .685 (9.6) Max .378 S301T S301T does not have terminal 2 Maximum Panel Thickness: .185” (4.7mm) DOUBLE POLE WITH SCREW LUG Toggle Position/Connected Terminals ( ) = Momentary Down Model S331T S332T S333T S335T S338T S339T R Electrical Capacity Resistive AC 125V AC 250V DC 30V Center Up Inductive AC 125V PF 0.6 Approvals R Pole & Throw — — — — — — DPST DPDT DPDT DPDT DPDT DPDT ON ON ON ON Keyway α= Angle of Throw 1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 INTERNAL CONNECTION NONE NONE OFF NONE OFF OFF DPDT OFF ON ON (ON) (ON) (ON) 2 3 — 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 (COM) 1 6 5 15A 15A 15A 15A 15A 15A 15A 15A 15A 6A 6A 6A 15A 15A 15A 20A 20A 20A 10A 10A 10A 8A 8A 8A 25° 25° 30° 25° 25° 25° R R R R R R R R (ON) ON R R Throw & Schematics: DPST 1 3 4 6 4 Note: Terminal numbers are actually on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 M3.5 x 5 6 3 (12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118 25° (6.6) .260 5 4 2 1 (6.1) Dia .240 (6.6) .260 (19.0) .748 (17.5) .689 (12.0) .472 (25.1) .988 (1.0) Typ .039 S331T S331T does not have terminals 2 & 5 Maximum Panel Thickness: .185” (4.7mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Medium/High Capacity Standard Size Toggles SINGLE POLE WITH QUICK CONNECT Toggle Position/Connected Terminals Down Model S301F Throw & Schematics: R Series S Inductive Electrical Capacity Resistive AC 125V AC 250V DC 30V α= Angle of Throw Center Up Approvals R Pole & Throw SPST Keyway AC 125V PF 0.6 ON 1-3 NONE OFF — 15A 6A 20A 10A 32° SPST 1 3 INTERNAL CONNECTION Note: Terminal numbers are actually on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 (1.5) Dia Typ .060 (0.8) Typ .031 3 (12.5) Dia .492 (28.5) 1.122 (9.0) .354 (3.0) Dia .118 32° 1 (6.1) Dia .240 (16.0) .630 (17.5) .689 (12.0) .472 (17.4) .685 (9.42) .371 (11.0) .433 (6.35) Typ .250 (7.5) Typ .295 S301F Maximum Panel Thickness: .185” (4.7mm) DOUBLE POLE WITH QUICK CONNECT Toggle Position/Connected Terminals ( ) = Momentary Down Model S331F S332F S333F S335F Throw & Schematics: R Electrical Capacity Resistive AC 125V AC 250V DC 30V Center Up Inductive AC 125V PF 0.6 Approvals R Pole & Throw — — — — DPST DPDT DPDT DPDT Keyway α= Angle of Throw ON ON ON ON 1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 INTERNAL CONNECTION NONE NONE OFF NONE DPDT OFF ON ON (ON) 2 3 — 2-1 5-4 2-1 5-4 2-1 5-4 (COM) 1 6 5 25A 25A 25A 15A 25A 15A 15A 6A 25A 25A 25A 20A 10A 10A 10A 8A 25° 25° 30° 25° R R R R R R DPST 1 3 4 6 4 Note: Terminal numbers are actually on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 (7.9) .311 (1.5) Dia Typ .060 (7.5) Typ .295 6 3 (12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118 α (6.35) Typ .250 5 4 2 1 (6.1) Dia .240 (11.7) .461 (19.0) .748 (17.5) .689 (12.0) .472 (30.3) 1.193 (0.8) Typ .031 S332F S331F does not have terminals 2 & 5 Maximum Panel Thickness: .185” (4.7mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Medium/High Capacity Standard Size Toggles GENERAL SPECIFICATIONS FOR S31 ~ S49 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Series S Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 25,000 operations minimum Shown on following tables Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: PBT resin for flatted lever; brass with chrome plating for all others Brass with chrome plating Phenolic resin Steel with chromate plating over zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with silver plating Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Installation Mounting Torque: Maximum Panel Thickness: Soldering Time & Temperature: 2.94Nm (26 lb•in) for double nut Shown beneath panel cutout in switch dimension drawings Manual Soldering: See Profile A in Supplement section. Standards & Certifications UL Recognized: Designated with UL recognized symbol beside part numbers on following pages. See Supplement section to find UL rating details. UL File No. WOYR2.E44145 Add “/U” to end of part number to order UL mark on switch. Designated with C-UL recognized symbol beside part numbers on following pages. See Supplement section to find C-UL rating details. C-UL File No. WOYR8.E44145 Add “/C-UL” to end of part number to order C-UL mark on switch. Designated with CSA certified symbol beside part numbers on following pages See Supplement section to find CSA rating details. File No. 023535-0-000 Add “/C” to end of part number to order CSA mark on switch. C-UL Recognized: CSA Certified: N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Medium/High Capacity Standard Size Toggles THREE POLE WITH SOLDER LUG *See Supplement section for UL detail Pole & Throw 3PST 3PDT 3PDT 3PDT 3PDT 3PDT ON ON ON ON (ON) ON Toggle Position/Connected Terminals ( ) = Momentary Down Keyway Series S Inductive Electrical Capacity Resistive AC 125V AC 250V DC 30V α= Angle of Throw Center Up Model S31 S32 S33 S35 S38 S39 Throw & Schematics: R Approvals * * * R AC 125V PF 0.6 1-3 4-6 7-9 2-3 5-6 8-9 2-3 5-6 8-9 2-3 5-6 8-9 2-3 5-6 8-9 2-3 5-6 8-9 NONE NONE OFF NONE OFF OFF OFF ON ON (ON) (ON) (ON) 3PDT 3 — 2-1 5-4 8-7 2-1 5-4 8-7 2-1 5-4 8-7 2-1 5-4 8-7 2-1 5-4 8-7 2 1 6 25A 25A 25A 15A 15A 15A 5 (COM) 4 9 9A 9A 9A 6A 6A 6A 8 7 20A 20A 20A 20A 15A 15A 10A 10A 10A 8A 8A 8A 25° 25° 30° 25° 25° 25° R R R R R R R R R R 3PST 1 3 4 67 9 INTERNAL CONNECTION Note: Terminal numbers are on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 (2.4) Dia Typ .094 (0.8) Typ .031 α (4.8) Typ .189 6 9 3 (12.5) Dia .492 (33.8) 1.331 (9.0) .354 (3.0) Dia .118 8 7 5 2 1 (6.1) Dia .240 (5.0) .197 (30.0) 1.181 (17.5) .689 (12.0) .472 (27.3) 1.075 4 S32 S31 does not have terminals 2, 5, & 8 Maximum Panel Thickness: .181” (4.6mm) FOUR POLE WITH SOLDER LUG *See Supplement section for UL detail Model Suffix R = Flatted Lever S41/S41R S42/S42R S43/S43R S45 – S48/S48R S49/S49R Throw & Schematics: R Toggle Position/Connected Terminals ( ) = Momentary Pole & Throw 4PST 4PDT 4PDT — — — 4PDT 4PDT 4PDT ON ON ON ON ON Down Keyway Electrical Capacity Resistive AC 125V AC 250V DC 30V Center Up Approvals * * * R Inductive α= Angle AC 125V of Throw PF 0.6 1-3 4-6 7-9 10-12 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12 NONE NONE OFF NONE OFF OFF OFF ON ON — 2-1 5-4 8-7 11-10 2-1 5-4 8-7 11-10 25A 25A 25A 15A 15A 15A 8 9 7 9A 9A 9A 6A 6A 6A 11 12 20A 20A 20A 20A 20A 20A 10A 10A 10A 8A 8A 8A 25° 25° 30° 25° 25° 25° R R R R R R (ON) 2-1 5-4 8-7 11-10 (ON) 2-1 5-4 8-7 11-10 (ON) 2-1 5-4 8-7 11-10 4PDT 2 1 6 5 (COM) 4 R R (ON) 2-3 5-6 8-9 11-12 R R 4PST 1 3 4 67 9 10 12 INTERNAL CONNECTION 3 10 Note: Terminal numbers are on the switch • Standard Hardware for Bat Lever: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut; for Flatted Lever (R): AT504M Knurled Face Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. • Optional Splashproof Boot Assembly: AT4181 boot plus hex nut and o-ring (only for bat lever models). See Accessories & Hardware section. (12.5) Dia .492 (11.5) .453 (1.5) .060 12 9 8 11 10 7 5 4 2 1 6 3 Keyway M12 P1 (2.4) Dia Typ .094 (0.8) Typ .031 α (4.8) Typ .189 (34.2) 1.346 Max. Panel Thickness: .220” (5.6mm) (12.5) Dia .492 (9.0) .354 (4.0) .157 (9.0) .354 (8.15) .321 (27.0) 1.063 (12.0) .472 (27.1) 1.067 (5.8) .228 (36.5) 1.437 (3.0) Dia .118 S42R S41 and S41R do not have terminals 2, 5, 8, & 11 Max. Panel Thickness: .181” (4.6mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Medium/High Capacity Standard Size Toggles THREE POLE WITH SCREW LUG *See Supplement section for CSA detail Pole & Throw * * * 3PST 3PDT 3PDT ON ON ON Toggle Position/Connected Terminals Down Keyway Series S Inductive Electrical Capacity Resistive AC 125V AC 250V DC 30V α= Angle AC 250V PF 0.6 of Throw Center Up Model S31T S32T S33T — — — Approvals R AC 125V PF 0.6 1-3 4-6 7-9 2-3 5-6 8-9 2-3 5-6 8-9 NONE NONE OFF OFF ON ON 3PDT 3 — 2-1 5-4 8-7 2-1 5-4 8-7 2 1 6 5 25A 25A 25A (COM) 4 9 9A 9A 9A 8 7 20A 20A 20A 10A 10A 10A 5A 5A 5A 25° 25° 30° R R Throw & Schematics: 3PST 1 3 4 67 9 INTERNAL CONNECTION Note: Terminal numbers are on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 M3.5 x 5 6 9 3 (12.5) Dia .492 (33.8) 1.331 (9.0) .354 (3.0) Dia .118 25° 8 7 4 5 2 1 (6.1) Dia .240 (7.5) .295 (30.0) 1.181 (17.5) .689 (12.0) .472 (29.8) 1.173 S32T S31T does not have terminals 2, 5, & 8 Maximum Panel Thickness: .181” (4.6mm) FOUR POLE WITH SCREW LUG *See Supplement section for CSA detail Pole & Throw Toggle Position/Connected Terminals Down Keyway Electrical Capacity Resistive AC 125V AC 250V DC 30V Center Up Inductive AC 125V PF 0.6 AC 250V PF 0.6 Model S41T S42T S43T Approvals — — — * * * 4PST 1 α= Angle of Throw 4PST 4PDT 4PDT ON ON ON 1-3 4-6 7-9 10-12 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12 NONE NONE OFF OFF ON ON — 2-1 5-4 8-7 11-10 2-1 5-4 8-7 11-10 4PDT 25A 25A 25A 5 1 6 (COM) 4 9A 9A 9A 8 9 20A 20A 20A 11 7 12 10A 10A 10A 5A 5A 5A 25° 25° 30° Throw & Schematics: 3 4 67 9 10 12 INTERNAL CONNECTION 2 3 10 Note: Terminal numbers are on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 M3.5 x 5 12 9 8 6 3 (12.5) Dia .492 (34.2) 1.346 (9.0) .354 (3.0) Dia .118 25° 11 10 5 7 4 2 1 (6.1) Dia .240 (8.3) .327 (38.0) 1.496 (17.5) .689 (12.0) .472 (29.6) 1.165 (36.5) 1.437 S42T S41T does not have terminals 2, 5, 8, & 11 Maximum Panel Thickness: .181” (4.6mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Medium/High Capacity Standard Size Toggles THREE POLE WITH QUICK CONNECT *See Supplement section for UL detail Pole & Throw 3PST 3PDT 3PDT ON ON ON Toggle Position/Connected Terminals Down Keyway Series S Inductive Electrical Capacity Resistive AC 125V AC 250V DC 30V α= Angle of Throw Center Up Model S31F S32F S33F R Approvals * * * R AC 125V PF 0.6 1-3 4-6 7-9 2-3 5-6 8-9 2-3 5-6 8-9 NONE NONE OFF OFF ON ON — 2-1 5-4 8-7 2-1 5-4 8-7 2 3 1 6 5 25A 25A 25A (COM) 4 9 9A 9A 9A 8 7 20A 20A 20A 10A 10A 10A 25° 25° 30° R R R R Throw & Schematics: 3PST 1 3 4 67 9 INTERNAL CONNECTION 3PDT Note: Terminal numbers are on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. (7.9) .311 M12 P1 Keyway (1.5) Dia Typ .060 (7.5) Typ .295 (6.35) Typ .250 6 9 3 (12.5) Dia .492 (33.8) 1.331 (9.0) .354 (3.0) Dia .118 25° 8 7 5 2 1 (6.1) Dia .240 (11.0) .433 (30.0) 1.181 (17.5) .689 (12.0) .472 (33.3) 1.311 (0.8) Typ .031 4 S32F S31F does not have terminals 2, 5, & 8 Maximum Panel Thickness: .181” (4.6mm) FOUR POLE WITH QUICK CONNECT *See Supplement section for UL detail Pole & Throw 4PST 4PDT 4PDT ON ON ON Toggle Position/Connected Terminals Down Keyway Electrical Capacity Resistive AC 125V AC 250V DC 30V α= AC 125V Angle PF 0.6 of Throw Center Up Inductive Model S41F S42F S43F R Approvals * * * R 1-3 4-6 7-9 10-12 2-3 5-6 8-9 11-12 2-3 5-6 8-9 11-12 NONE NONE OFF OFF — 25A 25A 25A 8 9 7 9A 9A 9A 11 12 20A 20A 20A 10A 10A 10A 25° 25° 30° R R ON 2-1 5-4 8-7 11-10 ON 2-1 5-4 8-7 11-10 4PDT 2 1 6 5 (COM) 4 R R 4PST Throw & Schematics: 1 3 4 67 9 10 12 INTERNAL CONNECTION 3 10 Note: Terminal numbers are on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. (7.9) .311 M12 P1 Keyway (1.5) Dia Typ .060 (7.5) Typ .295 12 9 8 5 7 4 6 3 (12.5) Dia .492 (34.2) 1.346 (9.0) .354 (3.0) Dia .118 25° (6.35) Typ .250 11 10 2 1 (6.0) Dia .236 (11.8) .465 (36.5) 1.437 (17.5) .689 (12.0) .472 (33.1) 1.303 (0.8) Typ .031 S42F Maximum Panel Thickness: S41F does not have terminals 2, 5, 8, & 11 .181” (4.6mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com Medium/High Capacity Standard Size Toggles GENERAL SPECIFICATIONS FOR S421 ~ S429 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Series S Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum for all other models 15,000 operations minimum Shown in tables on following pages Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Brass with chrome plating Brass with chrome plating Melamine phenol Steel with chromate plating over zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with silver plating Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Installation Mounting Torque: Maximum Panel Thickness: Soldering Time & Temperature: 2.94Nm (26 lb•in) for double nut Shown beneath panel cutout in switch dimension drawings Manual Soldering: See Profile A in Supplement section. N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-08 Medium/High Capacity Standard Size Toggles DOUBLE POLE WITH SOLDER LUG Toggle Position/Connected Terminals ( ) = Momentary Down Model S421 S422 S423 S425 S428 S429 Throw & Schematics: Approvals — — — — — — — — — — — — DPST 1 3 4 6 Series S Motor Load AC 125V Electrical Capacity Resistive AC 125V AC 250V Center Up Inductive PF 0.75 - 0.8 AC 125V AC 250V Pole & Throw DPST DPDT DPDT DPDT DPDT DPDT ON ON ON ON (ON) ON Keyway α= Angle of Throw 1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 NONE NONE OFF NONE OFF OFF OFF ON ON (ON) (ON) (ON) DPDT 3 — 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2 25A 25A 25A 15A 15A 15A 5 6 25A 25A 25A 15A 15A 15A 25A 25A 25A 15A 15A 15A 25A 25A 25A 15A 15A 15A 750W 750W 750W 400W 400W 400W 24° 24° 28° 24° 24° 24° INTERNAL CONNECTION (COM) 1 4 Note: Terminal numbers are on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 (2.4) Dia Typ .094 6 α (4.8) Typ .189 3 (33.2) 1.307 (12.5) Dia .492 (9.0) .354 (3.0) Dia .118 5 4 2 1 (6.1) Dia .240 (19.0) .748 (17.5) .689 (12.0) .472 (25.1) .988 (5.7) .224 (0.8) Typ .031 S422 S421 does not have terminals 2 & 5 Maximum Panel Thickness: .185” (4.7mm) DOUBLE POLE WITH SCREW LUG Toggle Position/Connected Terminals ( ) = Momentary Down Model S421T S422T S423T S425T S428T S429T Throw & Schematics: Approvals — — — — — — — — — — — — DPST 1 3 4 6 Electrical Capacity Resistive AC 125V AC 250V Center Up Inductive PF 0.75 - 0.8 AC 125V AC 250V Pole & Throw DPST DPDT DPDT DPDT DPDT DPDT ON ON ON ON (ON) ON Keyway Motor Load AC 125V α= Angle of Throw 1-3 4-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 2-3 5-6 NONE NONE OFF NONE OFF OFF OFF ON ON (ON) (ON) (ON) DPDT 3 — 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2-1 5-4 2 20A 20A 20A 15A 15A 15A 5 6 20A 20A 20A 15A 15A 15A 20A 20A 20A 15A 15A 15A 20A 20A 20A 15A 15A 15A 750W 750W 750W 400W 400W 400W 24° 24° 28° 24° 24° 24° INTERNAL CONNECTION (COM) 1 4 Note: Terminal numbers are on the switch • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M12 P1 M4 X 5 6 3 5 (12.5) Dia .492 (33.2) 1.307 (9.0) .354 (3.0) Dia .118 α 2 4 1 (6.1) Dia .240 (19.0) .748 (17.5) .689 (12.0) .472 (31.1) 1.224 (11.0) .433 S423T S421T does not have terminals 2 & 5 Maximum Panel Thickness: .185” (4.7mm) 05-08 N KK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com