Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FSUSB11 — Low-Power, Full-Speed (12Mbps) Switch
Features
Description
Space Saving MicroPak™ (1.6 x 2.1mm)
0.3Ω Maximum RON Flatness for +5V Supply
The FSUSB11 is a high-performance, dual Single-Pole
Double-Throw (SPDT) switch designed for switching
USB 1.1 signals. The device features ultra-low on
resistance (RON) of 1.15Ω maximum at 4.5V VCC and
4.3Ω at 2.7V supply. High bandwidth and ultra low (RON)
make this switch able to pass both USB low- and fullspeed signal with minimum signal distortion. The device
is fabricated with sub-micron CMOS technology to
achieve fast switching speeds and designed for breakbefore-make operation. The select input is TTL-level
compatible.
USB 1.1 Signal Switching Compliant
3db Bandwidth: >350MHz
Maximum 1.15Ω RON at 4.5V VCC and 4Ω for
2.7V Supply
Broad VCC Operating Range: 1.65V to 5.5V
Fast Turn-On and Turn-Off Time
Break-Before-Make Enable Circuitry
Over-Voltage Tolerant, TTL-Compatible
Control Input
Applications
Cell Phones, PDAs, Digital Cameras, Notebook
Computers
Ordering Information
Operating
Part Number Temperature
Range
FSUSB11L10X
FSUSB11MTCX
-40 to +85°C
-40 to +85°C
Package
Packing
Method
RoHS
10-Lead, MicroPak™, JEDEC MO255,1.6 X 2.1mm
Tape and Reel
RoHS
14-Lead Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
Tape and Reel
Eco
Status
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Figure 1. Block Diagram
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
©2005 Fairchild Semiconductor Corporation
FSUSB11 • Rev. 1.0.4
www.fairchildsemi.com
FSUSB11 — Low-Power, Full-Speed (12Mbps) Switch
November 2009
Figure 2. TSSOP Pin Assignment (Top View)
Figure 3. Micropak™ Pin Assignment (Top View)
Analog Symbol
FSUSB11 — Low-Power, Full-Speed (12Mbps) Switch
Pin Configuration
Figure 4. Analog Symbol
Pin Descriptions
TSSOP Pin #
MicroPak™ Pin #
Pin Names
Description
1, 3, 4, 6, 9, 12
1, 3, 4, 6, 7, 9
D+, D1+, D-, D1-, D2-, D2+
Data Ports
2, 5
10
GND
Ground
NC
No Connect
7, 8
10, 13
2, 8
S1, S2
Control Input
11, 14
5
VCC
Supply Voltage
Truth Table
Control Inputs
Function
Low Logic Level
D1 Connected to D+/D-
High Logic Level
D2 Connected to D+/D-
© 2005 Fairchild Semiconductor Corporation
FSUSB11 • Rev. 1.0.4
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
6.0
V
VS
Switch Voltage
-0.5
VCC + 0.5
V
VIN
Input Voltage
(1)
-0.5
6.0
IIK
Input Diode Current
ISW
Switch Current
200
mA
Peak Switch Current
(Pulsed at 1ms Duration,