MC10EL89DTR2

MC10EL89 5V ECL Coaxial Cable Driver Description The MC10EL89 is a differential fanout gate specifically designed to drive coaxial cables. The device is especially useful in Digital Video Broadcasting applications; for this application, since the system is polarity free, each output can be used as an independent driver. The driver boasts a gain of approximately 40 and produces output swings twice as large as a standard ECL output. When driving a coaxial cable, proper termination is required at both ends of the line to minimize signal loss. The 1.6 V output swings allow for termination at both ends of the cable, while maintaining the required 800 mV swing at the receiving end of the cable. Because of the larger output swings, the device cannot be terminated into the standard −2.0 V. All of the DC parameters are tested with a 50  to −3.0 V load. The driver accepts a standard differential ECL input and can run off of the Digital Video Broadcast standard −5.0 V supply. Features www.onsemi.com 8 1 SOIC−8 NB D SUFFIX CASE 751−07 MARKING DIAGRAMS* 8 • 375 ps Propagation Delay • 1.6 V Output Swings • PECL Mode Operating Range: ♦ VCC = 4.2 V to 5.7 V with VEE = 0 V ♦ VCC = 0 V with VEE = −4.2 V to −5.7 V HEL89 ALYW G 1 • NECL Mode Operating Range: • Internal Input Pulldown Resistors • These Devices are Pb-Free, Halogen Free and are RoHS Compliant A L Y W M G = Assembly Location = Wafer Lot = Year = Work Week = Date Code = Pb-Free Package (Note: Microdot may be in either location) Q0 1 8 VCC Q0 2 7 D Q1 3 6 D *For additional marking information, refer to Application Note AND8002/D. ORDERING INFORMATION Q1 4 5 VEE July, 2016 − Rev. 10 Shipping† MC10EL89DG SOIC−8 (Pb-Free) 98 Units/Tube MC10EL89DR2G SOIC−8 (Pb-Free) 2500/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Figure 1. Logic Diagram and Pinout Assignment © Semiconductor Components Industries, LLC, 2016 Package Device 1 Publication Order Number: MC10EL89/D MC10EL89 Table 1. PIN DESCRIPTION PIN Function D, D ECL Data Inputs Q0, Q0; Q1, Q1 ECL Data Outputs (1.6 Vpp) VCC Positive Supply VEE Negative Supply Table 2. ATTRIBUTES Characteristics Value Internal Input Pulldown Resistor 50 K Internal Input Pullup Resistor N/A ESD Protection Human Body Model Machine Model > 2 kV > 100 V Moisture Sensitivity, Indefinite Time Out of Drypack (Note 1) Level 1 Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in Transistor Count 31 Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test 1. For additional information, see Application Note AND8003/D. Table 3. MAXIMUM RATINGS Symbol Parameter Condition 1 Condition 2 Rating Unit VCC PECL Mode Power Supply VEE = 0 V 8 V VEE NECL Mode Power Supply VCC = 0 V −8 V VI PECL Mode Input Voltage NECL Mode Input Voltage VEE = 0 V VCC = 0 V 6 −6 V Iout Output Current Continuous Surge 50 100 mA TA Operating Temperature Range −40 to +85 °C Tstg Storage Temperature Range −65 to +150 °C JA Thermal Resistance (Junction-to-Ambient) 0 lfpm 500 lfpm SOIC−8 190 130 °C/W JC Thermal Resistance (Junction-to-Case) Standard Board SOIC−8 41 to 44 °C/W Tsol Wave Solder (Pb-Free)