MCH6102-TL-E

Ordering number : EN6480C MCH6102/MCH6202 Bipolar Transistor http://onsemi.com (–)30V, (–)1.5A, Low VCE(sat), (PNP)NPN Single MCPH6 Applicaitons • Relay drivers, lamp drivers, motor drivers, flash Features • • • • • Large current capacity Adoption of MBIT processes • High-speed switching Low collector-to-emitter saturation voltage Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm) High allowable power dissipation Specifications ( ) : MCH6102 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage VCBO VCEO Emitter-to-Base Voltage VEBO Conditions Ratings Unit (--30)40 V (--)30 V (--)5 V Continued on next page. Package Dimensions Product & Package Information unit : mm (typ) 7022A-007 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 4 0 to 0.02 1 2 3 0.65 TL 0.3 Marking 0.85 0.25 Packing Type: TL 4 MCPH6 AB MCH6102 CB LOT No. 5 3 LOT No. 6 2 LOT No. 1 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector LOT No. 0.07 MCH6102-TL-E MCH6202-TL-E 0.15 2.1 1.6 0.25 2.0 MCH6202 Electrical Connection 1, 2, 5, 6 3 1, 2, 5, 6 3 4 MCH6102 4 MCH6202 Semiconductor Components Industries, LLC, 2013 September, 2013 91912 TKIM/D2005EA MSIM TB-00001962/D1004 TSIM TB-00000347/83100TS (KOTO) TA-2843 No.6480-1/7 MCH6102/MCH6202 Continued from preceding page. Parameter Symbol Collector Current Conditions Ratings Unit IC ICP (--)1.5 (--)300 Collector Dissipation IB PC Junction Temperature Tj Storage Temperature Tstg Collector Current (Pulse) Base Current A (--)3 When mounted on ceramic substrate (600mm2×0.8mm) A mA 1.0 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Ratings Conditions min typ Unit max ICBO IEBO VCB=(--)30V, IE=0A (--)0.1 μA VEB=(--)4V, IC=0A (--)0.1 μA VCE=(--)2V, IC=(--)100mA Gain-Bandwidth Product hFE fT Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) Emitter Cutoff Current DC Current Gain Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time 560 VCE=(--)10V, IC=(--)300mA (450)500 VCB=(--)10V, f=1MHz IC=(--)750mA, IB=(--)15mA (9)8 IC=(--)750mA, IB=(--)15mA IC=(--)10μA, IE=0A V(BR)CBO V(BR)CEO Collector-to-Emitter Breakdown Voltage 200 MHz pF (--250)150 (--375)225 (--)0.85 (--)1.2 mV V (--30)40 V V IC=(--)1mA, RBE=∞ (--)30 V(BR)EBO ton IE=(--)10μA, IC=0A (--)5 tstg tf See specified Test Circuit. V (37)35 ns (115)205 ns (26)32 ns Switching Time Test Circuit IB1 IB2 OUTPUT INPUT RB VR + PW=20μs D.C.≤1% 50Ω 100μF VBE= --5V RL=16Ω + 470μF VCC=12V IC=20IB1= --20IB2=750mA For PNP, the polarity is reversed. Ordering Information Package Shipping MCH6102-TL-E MCPH6 3,000pcs./reel MCH6202-TL-E MCPH6 3,000pcs./reel IC -- VCE Collector Current, IC -- A --8mA --6mA --1.6 --50mA --40mA --30mA --1.2 --0.8 --4mA --2mA --0.4 IB=0mA 0 --200 --400 --600 IC -- VCE 2.0 --20mA --15mA --10mA 0 Pb Free --800 Collector-to-Emitter Voltage, VCE -- mV --1000 IT01872 MCH6202 30mA 50 MCH6102 Collector Current, IC -- A --2.0 memo mA Device 1.6 20mA 8mA 40mA 15mA 10mA 1.2 6mA 4mA 0.8 2mA 0.4 0 0 IB=0mA 200 400 600 800 Collector-to-Emitter Voltage, VCE -- mV 1000 IT01873 No.6480-2/7 MCH6102/MCH6202 --0.6 25°C --25°C --0.4 0.4 0 0 --0.2 --0.4 --0.6 --0.8 Base-to-Emitter Voltage, VBE -- V --1.0 0 DC Current Gain, hFE 25°C --25°C 100 7 5 --25°C 100 7 5 3 2 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 2 --100 7 C 75° Ta= 5°C --2 3 25°C 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 5 2 --100 Ta 5 °C =75 --25 3 25°C °C 2 5 7 --0.1 2 3 5 Collector Current, IC -- A 7 --1.0 2 3 IT01880 2 3 IT01877 3 2 100 7 °C 75 5 = Ta 3 25°C C 5° --2 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 IT01879 VCE(sat) -- IC MCH6202 IC / IB=50 7 7 7 1.0 MCH6202 IC / IB=20 1000 3 3 5 Collector Current, IC -- A VCE(sat) -- IC 2 3 VCE(sat) -- IC IT01878 MCH6102 IC / IB=50 --10 --0.01 2 5 10 0.01 3 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 2 7 0.1 7 3 5 5 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 1000 MCH6102 IC / IB=20 7 2 IT01876 VCE(sat) -- IC --1000 --1000 10 0.01 3 25°C 2 2 5 Ta=75°C 3 3 3 1.0 IT01875 MCH6202 VCE=2V 5 3 2 0.8 7 Ta=75°C 10 --0.01 0.6 hFE -- IC 1000 7 2 0.4 Base-to-Emitter Voltage, VBE -- V MCH6102 VCE= --2V 5 0.2 IT01874 hFE -- IC 1000 DC Current Gain, hFE 0.6 0.2 0 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 0.8 --25°C --0.8 1.0 C --1.0 1.2 Ta=75 ° Collector Current, IC -- A --1.2 --0.2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV MCH6202 VCE=2V 1.4 Ta=7 5°C Collector Current, IC -- A --1.4 IC -- VBE 1.6 MCH6102 VCE= --2V 25°C IC -- VBE --1.6 5 3 2 100 5°C 7 7 Ta= 5 --25 3 25°C °C 2 10 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC -- A 7 1.0 2 3 IT01881 No.6480-3/7 MCH6102/MCH6202 VBE(sat) -- IC MCH6102 IC / IB=50 7 5 3 2 --1000 75°C 25°C 3 2 --100 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 5 3 2 10 7 5 3 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 IT01883 Cob -- VCB MCH6202 f=1MHz 2 100 7 5 3 2 10 7 5 7 5 3 2 100 7 5 3 2 3 5 7 2 --0.1 3 2 3 5 Collector Current, IC -- A 5 7 1.0 2 3 --1.0 IT01886 op 0m s 2 100 7 5 3 2 3 5 7 2 0.1 1ms on 3 2 0.1 MCH6102 / MCH6202 Ta=25°C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2✕0.8mm) 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 5 7 1.0 IT01887 MCH6102 / MCH6202 1.2 s ati 3 PC -- Ta 1.4 er 5 3 Collector Current, IC -- A Collector Dissipation, PC -- W 7 5 m 3 IT01885 5 2 0.01 7 s 0μ 10 s 0μ 50 DC 1.0 10 2 MCH6202 VCE=10V 7 ICP=3A 10 7 10 f T -- IC 1000 ASO IC=1.5A 5 Collector-to-Base Voltage, VCB -- V IT01884 MCH6102 VCE= --10V 2 --0.01 Collector Current, IC -- A 3 2 0.1 5 Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 3 f T -- IC 1000 2 25°C 3 2 --0.1 3 75°C 5 3 7 7 5 Ta= --25°C 7 5 100 2 2 Collector Current, IC -- A MCH6102 f=1MHz 2 3 3 IT01882 3 5 5 100 0.01 3 Cob -- VCB 5 MCH6202 IC / IB=50 7 1000 Ta= --25°C 7 5 VBE(sat) -- IC 10000 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Base-to-Emitter Saturation Voltage, VBE(sat) -- mV --10000 M 1.0 ou 0.8 nte do na 0.6 ce ram ic 0.4 bo ard (6 00 mm 2 ✕0 0.2 .8m m) 0 3 Collector-to-Emitter Voltage, VCE -- V 5 7 100 IT01888 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT01889 No.6480-4/7 MCH6102/MCH6202 Embossed Taping Specification MCH6102-TL-E, MCH6202-TL-E No.6480-5/7 MCH6102/MCH6202 Outline Drawing MCH6102-TL-E, MCH6202-TL-E Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No.6480-6/7 MCH6102/MCH6202 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6480-7/7