MUR2100ERL

MUR2100E Preferred Device Switch-mode Power Rectifier Ultrafast “E” Series with High Reverse Energy Capability These state−of−the−art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. Features • 20 mjoules Avalanche Energy Guaranteed • Excellent Protection Against Voltage Transients in Switching • • • • • • http://onsemi.com ULTRAFAST RECTIFIER 2.0 AMPERES, 1000 VOLTS Inductive Load Circuits Ultrafast 75 Nanosecond Recovery Time 175°C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction These are Pb−Free Devices* Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 0.4 Gram (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • PLASTIC AXIAL LEAD CASE 59 Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds Polarity: Cathode Indicated by Polarity Band MARKING DIAGRAM MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 1000 V Average Rectified Forward Current (Note 1) IF(AV) 2.0 @ TA = 35°C A Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 35 A TJ, Tstg −65 to +175 °C Symbol Value Unit RqJA (Note 3) °C/W Operating Junction Temperature and Storage Temperature Range Maximum Thermal Resistance, Junction−to−Ambient Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 July, 2006 − Rev. 6 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Package Shipping† MUR2100E Axial Lead** 1000 Units/Bag MUR2100EG Axial Lead** 1000 Units/Bag MUR2100ERL Axial Lead** 5000/Tape & Reel MUR2100ERLG Axial Lead** 5000/Tape & Reel Device THERMAL CHARACTERISTICS Characteristic A MUR2100E YYWW G G 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. **This package is inherently Pb−Free. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MUR2100E/D MUR2100E ELECTRICAL CHARACTERISTICS Characteristic Symbol Value Unit Maximum Instantaneous Forward Voltage (Note 2) (IF = 2.0 A, TJ = 150°C) (IF = 2.0 A, TJ = 25°C) VF Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TJ = 100°C) (Rated dc Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A) trr Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V) tfr 75 ns WAVAL 10 mJ Controlled Avalanche Energy (See Test Circuit in Figure 6) 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. IF, INSTANTANEOUS FORWARD CURRENT (A) 10 VF @ 175°C 150°C 1.0 100°C 25°C 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF, INSTANTANEOUS VOLTAGE (V) Figure 1. Maximum Forward Voltage IF, INSTANTANEOUS FORWARD CURRENT (A) 10 VF @ 175°C 100°C 150°C 1.0 25°C 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VF, INSTANTANEOUS VOLTAGE (V) Figure 2. Typical Forward Voltage http://onsemi.com 2 3.5 1.75 2.20 600 10 100 75 V mA ns MUR2100E 1.0E−01 1.0E−01 IR, REVERSE CURRENT (A) IR, REVERSE CURRENT (A) VR @ 175°C 1.0E−02 1.0E−03 150°C 100°C 1.0E−04 1.0E−05 25°C 1.0E−06 1.0E−07 1.0E−02 1.0E−03 150°C 1.0E−05 100°C 1.0E−06 1.0E−07 1.0E−08 1.0E−08 0 200 400 600 800 VR @ 175°C 1.0E−04 1000 25°C 0 3.0 2.5 DC 1.5 SQUARE WAVE 0.5 0 50 100 150 200 PF(AV), AVERAGE POWER DISSIPATION (A) 3.5 2 SQUARE WAVE 0 0 0.5 40 1 1.5 2 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 6. Power Dissipation 10 20 DC 1 100 0 1000 3 Figure 5. Current Derating 1 800 4 TA, AMBIENT TEMPERATURE (°C) C, CAPACITANCE (pF) IF(AV), AVERAGE FORWARD CURRENT (A) 4.0 0 600 Figure 4. Typical Reverse Current Figure 3. Maximum Reverse Current 1.0 400 VR, REVERSE VOLTAGE (V) VR, REVERSE VOLTAGE (V) 2.0 200 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Figure 7. Typical Capacitance http://onsemi.com 3 2.5 MUR2100E NOTE 3. − AMBIENT MOUNTING DATA Data shown for thermal resistance, junction−to−ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA Lead Length, L 1/4 1/2 1/8 52 65 72 67 80 87 Units °C/W °C/W 50 °C/W 3 MOUNTING METHOD 1 L L ÉÉÉÉÉÉÉÉÉÉÉ MOUNTING METHOD 2 ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ L L Vector Pin Mounting ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ MOUNTING METHOD 3 L = 3/8 ″ Board Ground Plane P.C. Board with 1−1/2 ″ X 1−1/2 ″ Copper Surface SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. http://onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS AXIAL LEAD CASE 59−10 ISSUE U DATE 15 FEB 2005 B K STYLE 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. D STYLE 2 F A SCALE 1:1 POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) F K DIM A B D F K INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 −−− 0.050 1.000 −−− MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 −−− 1.27 25.40 −−− GENERIC MARKING DIAGRAM* STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE STYLE 2: NO POLARITY A xxx xxx YYWW STYLE 1 xxx A YY WW A xxx xxx YYWW STYLE 2 = Specific Device Code = Assembly Location = Year = Work Week *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. DOCUMENT NUMBER: DESCRIPTION: 98ASB42045B AXIAL LEAD Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative